Enclosed Starter

Catalogue Number: LE1D12U7S48EM
RRP (Inc. GST)


hide show
Product brand
Schneider Electric
Package 1 Weight
1243 g
Package 1 Height
199 mm
Package 1 width
166 mm
Package 1 Length
260 mm
REACh free of SVHC
EU RoHS Directive
Toxic heavy metal free
Mercury free
RoHS exemption information
China RoHS Regulation
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

Frequently Asked Questions

hide show

What is the part name for the DOL starter with Estop in Tesys D range?

LE1D12U7S48EM is an example part# for the teyss D DOl with the latching E-stop.
"EM" at the end of the part# for LE1D12*****

How do you wire up an LE1D12U7S48.

Remove the signal supply wire from L3 and connect a supply wire, from an external source, to the upstream "line side" of the electrical contact block on the back of the "start" pushbutton.
Then the downstream "load side" of the same "start" pushbutton electrical contact will normally be connected to terminal number "A1" on the coil of the contactor.
Also, because of the geographical layout of the LE1D12U7S48 starter unit, then the normally closed (N/C) electrical contact inside the thermal overload unit will be connected between the neutral and terminal number "A2"
on the same contactor.

Does the empty enclosure DE1DS1 suit the LE1D12U7S48 enclosed dole starter?

The empty enclosure DE1DS1 does suit the LE1D12U7S48 enclosed dole starter.
  • DE1DS1 suits LE1D12...09 
  • DE1DS2 suits LE1D18...35.
For further information please visit https://www.se.com/au/en/product/DE1DS1/tesys-le---enclosure-for-dol-starter---with-2-pushbuttons/

What is the part number for a DOL non reversing starter for 13amp 3 phase load ?

The part number for a DOL non reversing starter for 13amp 3 phase load  - LE1D12N7S48 & LRD16

For further information , visit link below:-
User-added image

What is the replacement for a LE1D12N7R05

The above part is no longer available like this, but is made up of LE1D12N7S48 + LRD05
3 Pole Reversing and Non Reversing DOL Starters
Model D DOL Non-Reversing Starters with Overload Purchased Separately
IP65 Polycarbonate Enclosure (4)
3-phase 415V AC3 kW: 0.37
Overload Range A: 0.63 to 1.0
Overload*: LRD05
*For overload pricing please refer to the Overload Relays section in Power Control and Protection 

Is there a replacemnet for the old DOL motor starters like LE1D12U7R10?

All of the LE1D12U7R** parts have now been Divide into two parts enclosed starter and thermal overload see table for the new part numbers/ format:
Old Part Numbers Enclosed Starter Thermal Overload
LE1D12U7R10 LE1D12U7S48 plus LRD10
LE1D12U7R12 LE1D12U7S48 plus LRD12
LE1D12U7R14 LE1D12U7S48 plus LRD14
LE1D12U7R16 LE1D12U7S48 plus LRD16

For further information please visit https://www.clipsal.com/Trade


Is there an alternative to the 56DOL9/10 as it is a made to order product?

Alternatively there is a LE1D12N7548EM with the overload LRD14.

Note: this part will not fit on an existing 56 Series enclosure wherefore the 56DOL9/10 Will.