TeSys D Contactor, 4P(4 NO), AC-1, <= 440V, 200A, 24 VDC Standard Coil

TeSys D Contactor, 4P(4 NO), AC-1, <= 440V, 200A, 24 VDC Standard Coil

TeSys D Contactor, 4P(4 NO), AC-1, <= 440V, 200A, 24 VDC Standard Coil

Item Number: LC1D1150046BD

Retail
$3,321.66
RRP (Inc. GST)

Product Dimensions

Width icon

Width155 mm

Height icon

Height158 mm

Depth icon

Depth115 mm

See full specifications

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Range of product

TeSys D

Range

TeSys

Product or component type

contactor

Sustainable offer status

Green Premium product

Warranty

18 months

Physical

[Ue] rated operational voltage

  • power circuit: <= 1000 V AC 25...400 Hz
  • power circuit: <= 460 V DC
    • [Ie] rated operational current

      200 A (at <60 °C) at <= 440 V AC AC-1 for power circuit

      Electrical durability

      0.8 Mcycles 200 A AC-1 at Ue <= 440 V

      Mounting support

    • plate
    • rail
      • Standards

      • CSA C22.2 No 14
      • EN 60947-4-1
      • EN 60947-5-1
      • IEC 60947-4-1
      • IEC 60947-5-1
      • UL 508
        • Product certifications

        • LROS (Lloyds register of shipping)
        • RINA
        • CSA
        • DNV
        • GOST
        • CCC
        • UL
        • GL
        • BV
          • Connections - terminals

          • control circuit: lugs-ring terminals (external diameter: 8 mm)
          • power circuit: lugs-ring terminals (external diameter: 25 mm)
          • power circuit: bars 1 cable(s) - busbar cross section: 5 x 25 mm
            • Mechanical durability

              8 Mcycles

              IP degree of protection

              IP20 front face conforming to IEC 60529

              Ambient air temperature for storage

              -60-80 °C

              Height

              158 mm

              Width

              155 mm

              Depth

              115 mm

              Net weight

              2.86 kg

              EU RoHS Directive

              Compliant

              Mercury free

              Yes

              RoHS exemption information

              Yes

              China RoHS Regulation

              Product out of China RoHS scope. Substance declaration for your information

              Environmental Disclosure

              ENVPEP060301EN

              Circularity Profile

              ENVEOLI100405EN

              California proposition 65

              WARNING: This product can expose you to chemicals including: Antimony oxide & Antimony trioxide which is known to the State of California to cause Carcinogen harm. For more information go to www.p65warnings.ca.gov

              Others

              Product name

              TeSys D

              Device short name

              LC1D

              Contactor application

              resistive load

              Utilisation category

              AC-1

              Poles description

              4P

              Pole contact composition

              4 NO

              Control circuit type

              DC standard

              [Uc] control circuit voltage

              24 V DC

              [Uimp] rated impulse withstand voltage

              8 kV conforming to IEC 60947

              Overvoltage category

              III

              [Ith] conventional free air thermal current

              200 A (at 60 °C) for power circuit

              Irms rated making capacity

              1260 A at 440 V for power circuit conforming to IEC 60947

              Rated breaking capacity

              1100 A at 440 V for power circuit conforming to IEC 60947

              [Icw] rated short-time withstand current

            • 250 A 40 °C - 10 min for power circuit
            • 550 A 40 °C - 1 min for power circuit
            • 950 A 40 °C - 10 s for power circuit
            • 1100 A 40 °C - 1 s for power circuit
              • Associated fuse rating

              • 250 A gG at <= 690 V coordination type 1 for power circuit
              • 200 A gG at <= 690 V coordination type 2 for power circuit
                • Average impedance

                  0.6 mOhm - Ith 200 A 50 Hz for power circuit

                  [Ui] rated insulation voltage

                • power circuit: 600 V CSA certified
                • power circuit: 600 V UL certified
                • power circuit: 1000 V conforming to IEC 60947-4-1
                  • Power dissipation per pole

                    24 W AC-1

                    Protective cover

                    with

                    Tightening torque

                  • control circuit: 1.2 N.m - on lugs-ring terminals - with screwdriver flat Ø 6 mm M3.5
                  • control circuit: 1.2 N.m - on lugs-ring terminals - with screwdriver Philips No 2 M3.5
                  • power circuit: 12 N.m - on lugs-ring terminals hexagonal screw head 13 mm M8
                  • power circuit: 12 N.m - on bars hexagonal screw head 13 mm M8
                    • Operating time

                    • 20...35 ms closing
                    • 40...75 ms opening
                      • Safety reliability level

                      • B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1
                      • B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1
                        • Maximum operating rate

                          1200 cyc/h 60 °C

                          Coil technology

                          with integral suppression device

                          Time constant

                          25 ms

                          Inrush power in W

                          270-365 W (at 20 °C)

                          Hold-in power consumption in W

                          2.4-5.1 W at 20 °C

                          Contact compatibility

                          M8

                          Compatibility code

                          LC1D

                          Protective treatment

                          TH conforming to IEC 60068-2-30

                          Pollution degree

                          3

                          Operating altitude

                          3000 m without derating

                          Fire resistance

                          850 °C conforming to IEC 60695-2-1

                          Flame retardance

                          V1 conforming to UL 94

                          Mechanical robustness

                        • vibrations contactor open: 2 Gn, 5...300 Hz
                        • vibrations contactor closed: 4 Gn, 5...300 Hz
                        • shocks contactor closed: 15 Gn for 11 ms
                        • shocks contactor open: 6 Gn for 11 ms
                          • Unit Type of Package 1

                            PCE

                            Number of Units in Package 1

                            1

                            Package 1 Weight

                            2.37 kg

                            Package 1 Height

                            16.8 cm

                            Package 1 width

                            21.2 cm

                            Package 1 Length

                            18.5 cm

                            WEEE

                            The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

                            PVC free

                            Yes
                            Show all specifications

                            Documents & downloads

                            hide show
                            Filter items
                            • All

                            • CAD Files and Packs

                            • Product Brochures

                            • Technical Data Catalogues

                            • End of Life Manual

                            • Installation Instruction

                            • Product Environmental

                            • Data Bulletin

                            • Declaration of Conformity

                            • Certificates (MSDS)

                            Frequently Asked Questions

                            hide show

                            Video: What auxiliary contact modules are available for the LC1D and LC2D contactors?

                            Issue:
                            Auxiliary contact modules for the LC1D and LC2D contactors

                            Product Line: 
                            Contactor and Starters - IEC

                            Environment:
                            North American Products

                            Resolution:
                            Select based on application requirements. Please note that the TeSys and Pre-TeSys auxiliary blocks are backward/forward compatible.
                            Front Mounting; maximum of 1 block per contactor:

                            N.O.-------N.C.-----TeSys P/N--------Pre-TeSys P/N
                            --1-----------1---------LADN11-----------LA1DN11
                            --1-----------1---------LADN11G---------LA1DN11G (See Footnote 1)
                            --1-----------1---------LADN11P---------LA1DN11P (See Footnote 1)
                            --2-----------0---------LADN20-----------LA1DN20
                            --2-----------0---------LA1DX20---------LA1DX20 (See Footnote 2)
                            --2-----------0---------LA1DY20---------LA1DY20 (See Footnote 3)
                            --0-----------2---------LADN02-----------LA1DN02
                            --2-----------2---------LADN22-----------LA1DN22
                            --2-----------2---------LADN22G---------LA1DN22G (See Footnote 1)
                            --2-----------2---------LADN22P---------LA1DN22P (See Footnote 1)
                            --2-----------2---------LADC22------------LA1DC22 (See Footnote 4)
                            --3-----------1---------LADN31------------LA1DN31
                            --3-----------1---------LA1DZ31----------LA1DZ31 (See Footnote 5)
                            --1-----------3---------LADN13------------LA1DN13
                            --4-----------0---------LADN40------------LA1DN40
                            --4-----------0---------LA1DZ40-----------LA1DZ40 (See Footnote 6)
                            --0-----------4---------LADN04------------LA1DN04




                            Front Mounting; maximum of 1 block per contactor: For use with D2 Series 25 amp through 80 amp contactors and TeSys Series 40 amp through 80 amp only.

                            N.O.-------N.C.-----TeSys P/N--------Pre-TeSys P/N
                            --1-----------0--------LADN10----------LA1DN10
                            --0-----------1--------LADN01----------LA1DN01

                            Side Mounting; maximum of 1 block on each side for D2 Series and Tesys Series 40 through 80 amp contactors. Tesys 9 through 32, 115, and 150 amps contactors will accept 1 block and is limited to left side only. (*) DC control devices will not accept side mount auxiliaries.
                            (*) DC control exceptions that will accept one left side mounted auxiliary: LC1D115 & LC1D150.

                            N.O.-------N.C.-----TeSys P/N--------Pre-TeSys P/N
                            --1-----------1--------LAD8N11----------LA8DN11
                            --2-----------0--------LAD8N20----------LA8DN20
                            --0-----------2--------LAD8N02----------N/A

                            Footnotes:
                            {1} EN50 012 Machine Tool Terminal Markings
                            {2} (2) NO Sealed Dust Tight Contacts
                            {3} Gold Flash Contacts
                            {4} (1) NO & (1) NC Standard and (1) NO & (1) NC Make Before Break
                            {5} (2) NO Dust Tight Contacts & (1) NO & (1) NC Standard Contacts
                            {6} (2) NO Dust Tight Contacts & (2) NO Standard Contacts

                            What is the color scheme of the Tesys D-Line contactors?

                            Issue:
                            Looking for different color scheme of the Tesys D-Line contactors.

                            Product Line:
                            Tesys D Contactors

                            Environment:
                            LC1D contactors

                            Resolution:
                            Beige and dark gray.
                             

                            What code is a mechanical interlock for the 4pole LC1D1150046 contactor?

                            LA9D11502 will fit the 4p LC1D115 and LC1D150 contactors

                            What are the stand alone short circuit current ratings on the LC1D** contactors?

                            Issue:
                            Tesys D SCCR

                            Product Line:
                            Contactors and Overload Relays

                            Environment:
                            TeSys™ D Contactors and Overload Relays
                             
                            Resolution:
                            The contactors have a stand alone withstand rating that has been established by UL and is based on the maximum horsepower rating for a given device. However, only combination type starters are supplied with short circuit protective devices having a short circuit current rating.

                            They are as follows:
                            Horsepower SCCR (A)

                            0 thru 1 1,000
                            1 thru 50 5,000
                            51 thru 200 10,000
                            201 thru 400 18,000
                            401 thru 600 30,000
                            601 thru 900 42,000
                            901 thru 1600 85,000
                            1601+ 100,000

                            Are the D-Line contactors rated to break DC voltages?

                            Issue: 
                            Can the TeSys D line be used to control DC loads? 

                            Product Line:
                            Tesys D contactors

                            Environment:
                            Products sold and used in the United States
                             
                            Cause:
                             DC power circuit
                             
                            Resolution:
                             
                            Yes, 75 VDC (125 VDC for D115 & D150) per pole which means that through a four pole device breaking 300 VDC is possible by wiring all four power poles in series. However, be aware that the device current ratings will differ according to the number of poles in series and the type of application.

                            Devices are suitable but not UL Listed for DC applications.

                            More information on their DC ratings can be found in the current TeSys Motor Control and Protection Compentns catalog: https://www.schneider-electric.us/en/download/document/MKTED210011EN/


                             

                            What are the coil voltage codes for the LC1D115 / LC2D115 and LC1D150 / LC2D150 TeSys contactor?

                            Issue:
                            LC1D115 / LC2D115 and LC1D150 / LC2D150

                            Product Line:
                            Tesys D line Contactors

                            Environment:
                            North America

                            Resolution:
                            The following list the more common voltage suffix codes for these product lines.  For a more comprehensive list and to determine compatibility with a given product, refer to the catalog below.

                            Note 1: LC1D150 contactors are only available with *7 coil codes.
                            Note 2: Coil Code ending number represents frequency rating as follows:
                            5 = 50 Hertz
                            6 = 60 Hertz
                            7 = 50/60 Hertz

                            AC Volts ___Code                DC Volts ___Code
                            24 ___ B5 or B6 or B7          12 ___ Not Avail.        
                            42 ___ D5 or D7                   24 ___ BD
                            48 ___ E5 or E6 or E7          36 ___ CD
                            110 ___ F5 or F6 or F7         48 ___ ED
                            115 ___ FE5 or FE7             60 ___ ND
                            120 ___ G6 or G7                72 ___ SD
                            127 ___ FC5 or FC7            110 ___ FD
                            208 ___ L6 or LE7               125 ___ GD
                            220 ___ M5 or M6 or M7       220 ___ MD
                            230 ___ P5 or P7                 250 ___ UD
                            240 ___ U5 or U6 or U7        440 ___ RD
                            277 ___ W6 or UE7                
                            380 ___ Q5 or Q6 or Q7                
                            400 ___ V5 or V7                
                            415 ___ N5 or N7                
                            440 ___ R5 or R6 or R7                
                            480 ___ T6 or T7                
                            500 ___ S5 or S7                


                             

                            Will the LAD** time delay auxiliary contact module fit the D2 series pre-Tesys contactors?

                            Issue:
                            Can new accessories be used on older style contactors

                            Product Line:
                            IEC contactors and starters

                            Environment:
                            Products sold and used in the United States

                            Cause:
                            Identifying product compatibility

                            Resolution:
                            Yes, all front mount D2 and Tesys series auxiliary modules are backward forward compatible.


                             

                            What is the part number for a replacement 4 pole 25amp contactor for the LC1D12004B7?

                            The part number for a replacement 4 pole 25amp contactor for the LC1D12004B7 is - LC1DT25B7

                            For further information, visit the link below:-
                            https://www.schneider-electric.com.au/en/search/LC1DT25B7
                            User-added image

                             

                            What is the power terminal lug data for the LC1D40, LC1D50, LC1D65, LP1D40, LP1D50, and LP1D65 contactor?

                            Issue:
                            Identifying power terminal lug data for the D2 style contactors

                            Product Line:
                            Tesys D line contactors

                            Environment:
                            Products sold and used in the United States

                            Cause:
                            Power terminal lug data required

                            Resolution:
                            For contactors with screw clamp terminals:
                            stranded cable w/o cable end : One #10-3 AWG or Two #10-4 AWG per terminal.
                            stranded cable w/cable end: One #10-4 AWG or Two #12-2 AWG per terminal.
                            solid cable: One #10-3 AWG or Two #10-6 AWG per terminal.

                            What is the replacement contactor for the LC1D65004F5?

                            The new code is LC1DT80AF7 which is made to order.

                            Are 208 volt replacement control coils available for LC2D12004?

                            Issue:
                            Looking for a 208 volt replacement control coils available for an LC2D12004.

                            Product Line:
                            Tesys D Contactors

                            Environment:
                            LC2D12004

                            Resolution:
                            This coil is obsolete. Replace the contactor with the new TeSys product, LC2DT25LE7. Note this is a functional equal only. Accessories for the old product may or may not fit the new design. Confirm dimensions.
                             

                            What is the part number for replacement Contactor to LP1D25004BD?

                            Replacement Contactor for the older LP1D25004BD is new LC1DT40BD
                            see link for more details.....
                            https://eshop.schneider-electric.com/product.aspx?org=21&lang=1&dist=276&prod_id=LC1DT40bd
                             
                            Show More