Frequently Asked Questions
The LRD relays has a solid tag to be used with LC1D** contactors. If you are not using LC1D contactors then using the following accessories you can terminate cable directly.
For LRD01…35 use the following part: LAD7B106
For LRD33•• & LRD43•• (3) use the following part: LA7D3064
TeSys SoLink is the connection module to connect GV2/GV3 motor circuit breakers to associated contactors and can be used with GV2 / GV3 breakers up to 30kW.
For more information please visit the Link provided
Each TM3 I/O module is able to monitor and control up to 4 motor starters and up to 56 motor starters can be connected to logic controller.
For more information aboput this range please Visit the Schneider website on the link provided
TeSys SoLink is suitable for 24VDC control supply; the TM3 I/O module provides the 24V DC control voltage to the motor starter.
For more information on this range please visit the Schneider electric web site on the link provided
The part codes you need LC1F630 + LX1FL220 + LADN11
The Auxiliary is an LADN31
Use a LAD7X3 retrofit plate.
CTA-ID : 2053453
Is the LAD7B10 a UL or CSA recognized component?
IEC Overload Mounting Kit
Clarify CSA and UL listing for IEC components
As of 6/30/2016 this device has been UL component recongnized. This device has not been CSA recognized
Key words LAD7B10, UL, CSA, separate mounting
Two lock elements come with LAD311. The first one, already mounted on LAD311 when delivered is suitable for almost all cases of LC1D contactor. However, depending on the type of coil of the contactor (DC or AC), this element shall be mounted in one position for DC or turned by 180° around an horizontal axis for AC coil contactor. Note that on the lateral face of this elements the markings “DC” or “AC” mounted upwards indicates the right position to be used. The second LAD311 lock element shall be used when mounting contactors LC1D09 to LC1D18 with screw clamp. In this case, this element shall be mounted on LAD311 instead of the first one which can be scrapped away.
See attached document for reference.
Separate mount block needed for older style overload relay
IEC contactors and starters
North American Products
No. These are a different design and will not work with the pre - Tesys overload relays.
AC coil replacement for CAD32 and CAD50
Tesys CAD Control Relays
Volt = coil part number
12 = LXD1J7
21 = LXD1Z7
24 = LXD1B7
32 = LXD1C7
36 = LXD1CC7
42 = LXD1D7
48 = LXD1E7
60 = LXD1EE7
100 = LXD1K7
110 = LXD1F7
115 = LXD1FE7
120 = LXD1G7
127 = LXD1FC7
200 = LXD1L7
208 = LXD1LL7
220/230 = LXD1M7
230 595 21 LXD1P7
230/240 = LXD1U7
277 781 30 LXD1W7
380/400 = LXD1Q7
400 = LXD1V7
415 = LXD1N7
440 = LXD1R7
480 = LXD1T7
600 = LXD1X7
690 = LXD1Y7