Clipsal MAX4 Mini Neutral link 100 A 500 V 7 hole with cover front wiring Black

• Save the attached License File onto your computer (It is suggested that you save your license file in the same folder as the Geo SCADA installation)
• Start the Geo SCADA server using the Service Manager or by right clicking the server icon in the bottom right of the screen and selecting Start Server.

• Right click on the server icon and select ‘License Details’ from the pop-up menu to view the following window:

• Click Change to browse to the license file that was provided by the TRSS licensing team and saved to your hard drive per previous instructions.
• Select file and click open:
• Double check that license features such as point size, web client and/or applicable drivers are listed in their respective fields.

Please note: the ‘0’ within the ViewX client field is a default setting that will not affect the enabling of the embedded ViewX client in the upcoming section. If server side floating ViewX clients have been purchased for Geo SCADA, this is where the purchased quantity will appear.

Step Two – Embedded ViewX Client Activation:

Important Note - Before proceeding with the following procedure, please ensure that the ViewX client is closed.

• Click the Windows Start Menu, highlight EcoStruxure Geo SCADA and select Configure Connections.
• The Geo SCADA ‘Client Dialog’ will appear - Click on the ‘Licenses’ button:

• The following screen will appear:

• Click the browse button (… right of the license file field) and browse to the same file used to activate the server in the previous step.
• Select file and click open.
• Click on “Apply” and then click “Refresh”. The license should now show as valid.
• Click on the OK button and close the ‘Client Licensing’ dialog.
• (Re)start the ViewX client by clicking the ViewX icon on your desktop.

If at this point you are receiving an error message stating “insufficient licenses available for client” you want to make sure that your Geo SCADA Client Configurator has the “Use Client Licensing” option showing a checkmark.


 

Please see attached link to the manual. Attention to page (142-144)

https://updates.clipsal.com/ClipsalSoftwareDownload/mainsite/cis/technical/AutoController/5500NAC_5500SHAC_FW_v1.0_EN.pdf

 Automation Controller can act as a BACnet server only (not as a client)

How to display sunrise/sunset times on NAC/SHAC system

Create sunrise and sunset userparameter
 

Object will display the actual value
 

Resident Script

Visualization page

Add parameter sunrise/sunset in Visualization

Display

:Note: make sure your regional settings are correct and for specific times to add Latt and Long settings??

Sunset/Sunrise requires change the latitude and longitude,

– eg  Adelaide latitude and longitude

latitude = -34.929

longitude = 138.601

sunrise, sunset = rscalc(latitude, longitude)

--  sunset and sunrise  variable

sunrise = string.format('%d:%.2d', math.floor(sunrise / 60), sunrise % 60)

sunset = string.format('%d:%.2d', math.floor(sunset / 60), sunset % 60)

Issue:
ILF fault on the ATV71 with an  VW3A3501 CIC card installed.

Product line:
Altivar ATV71

Environment:
All models, all serial numbers 

Cause:
If the CIC card is missing the external +24vdc pwr supply the drive will trigger an ILF fault after 1 sec of being powered up.      

Resolution:
Per the CIC installation manual document, atv71_controller_inside_EN_V3 page 10, it is recommended to add an external power supply part number ABL7RE2402 to the controller inside cards +24vdc and com terminals to resolve issue.
 

The procedure for setting the time and date in Modicon PL7 Premium CPU is as follows:

DALI mapping

5080CTC Colour V2/3 touch screen controlling dalicontrol

If having socket error when enabling Dali Mapping

Go into window services and stop Dalibuilding scheduler