Frequently Asked Questions
hide
show
What are the part numbers for neutral and active links that take 25mm cable?
The part numbers are L11/25 for the neutral link and L11/25R for the active link.
Does the 413/15 come with a back plate?
No it doesn't come with a back plate. You will need a
413NP.
Some of the key features are:
- For the use of cable ties for cable clamping
- Not suitable for 414/4P
- For 410, 413 and 414 products
- AS3100, AS/NZS3112, AS3109 Certified
For further information please visit
https://www.clipsal.com/Trade/Products/ProductDetail?catno=413NP
Does Clipsal have a Link Bar with at 13 tunnels and 1 x 50mm and 3 x 16mm tunnels?
Yes the L13/150 will suit those requirements.
Can the operating handle of a General Duty Safety Switch be padlocked in the ON or OFF position?
Issue:
Product Design Feature
Product Line:
General Duty Safety Switches
Environment:
Front Covers
Cause:
Padlocking
Resolution:
Lock OFF:
Provision to padlock the operating handle in the OFF position is standard on all General Duty Safety Switches.
Lock ON:
There are NO provisions available, either factory or field modified, on ANY Series E or prior design series.
There are provision ONLY to padlock the handle in the ON position provided on Series F Switches (field modification ONLY required). This will be subject to local code regulations - consult local authorities for interpretation. On Series F Switches, the lockplate on the side of the switch, next to the operating handle, will have a small center punch mark towards the top of the lockplate. This center punch mark, may be drilled out in the field to accommodate a padlock.
NOTE: Drilling a hole in the painted steel lockplate, will expose unpainted steel, which should be treated(or touched up) with paint. Square D does offer the gray(ANSI 49) paint in a spray can, the catalog number is PK49SP.