blister of 5 disc mount with screws
TPP, Cavity fixing with screw
blister of 5 disc mount with screws
TPP, Cavity fixing with screw

Thorsman TPP-13xM5S, Cavity Fixing, with Screw, Set of 5, DIY

Catalogue Number: IMT37413
blister of 5 disc mount with screws
TPP, Cavity fixing with screw
blister of 5 disc mount with screws
TPP, Cavity fixing with screw
Retail
$22.66
RRP (Inc. GST)

Specifications

hide show
Range of product
Thorsman
Product or component type
cavity fixing
Device short name
TPP
Provided equipment
screw
Mounting support
board material - thickness: 10-35 mm
Thread type
M5
Screw diameter
5 mm
Screw length
65 mm
Drilling diameter
13 mm
Quantity per set
set of 5
Net weight
0.0203 kg
Material
  • screw: steel electroplated
  • toggle: zinc
  • collar: zinc
  • spring: steel
    • Practical load capacity
    • shear: 50 kg for 13 mm board 2.5 )
    • pull-out load: 17 kg for 13 mm board 3 )
    • shear: 80 kg for 2 x 13 mm board 2.5 )
    • pull-out load: 34 kg for 2 x 13 mm board 3 )
      • Thickness
      • 0-47 mm fixture 13 mm board
      • 0-34 mm fixture 2 x 13 mm board
        • Type of packing
          plastic bag and cardboard with eurohole
          Ambient air temperature for operation
          -20-80 °C
          Diameter
          18 mm
          Length
          90 mm
          Package 1 Weight
          0.109 kg
          Package 1 Height
          1.35 dm
          Package 1 width
          0.15 dm
          Package 1 Length
          0.93 dm
          Sustainable offer status
          Green Premium product
          REACh free of SVHC
          Yes
          EU RoHS Directive
          Pro-active compliance (Product out of EU RoHS legal scope)
          Toxic heavy metal free
          Yes
          Mercury free
          Yes
          RoHS exemption information
          Yes
          China RoHS Regulation
           Pro-active China RoHS declaration (out of China RoHS legal scope)
          Environmental Disclosure
          ENVPEP101028EN

          Frequently Asked Questions

          hide show

          Is is possible to scale ATV320 analog input to have precisely 25.0Hz when AI1=5V

          Issue:
          Need to scale to have 5V equal 25Hz speed. 

          Product line:
          Altivar 320, ATV320 Altivar Machine

          Environment:
          all models

          Cause:
          n/a

          Resolution:
          By default, the analog input on the ATV320 follows Low speed to High speed in Inputs/Outputs CFG > Reference Template = Standard

          To have the drive follow 25Hz with 5V analog signal, set LSP to 0.0 and HSP to 50Hz. Otherwise 5V cannot refer to 25Hz.
          If necessary adjust AI1 min value, AI1 max value, AI1 range, AI1 Interim points X or Y. 

          See the extracted pages from the ATV320 programming manual attached