Quantcast

Clipsal Iconic Essence Rocker, COOKER

Ash Grey | Clipsal Iconic Essence Rocker, COOKER

Clipsal Iconic Essence Rocker, COOKER

Item Number: E40CR-AG

Build this product i

Retail
$4.77
RRP (Inc. GST)

Easily identify which room or area is which with these Essence pictogram rockers. No need for an electrican to install. Non-standard pictogram rockers can be ordered as special items.

Colour Ash Grey (AG)
  • Ash Grey 1 PCE
  • Arctic White 1 PCE

Product Dimensions

Width icon

Width23 mm

Height icon

Height23 mm

Depth icon

Depth2 mm

See full specifications

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-
The Clipsal Iconic Essence range, Good Design Award Winner 2019

Features

Irresistibly elegant

  • Simple design with clean natural lines
  • Available in Artic White (AW) and Ash Grey (AG)
  • Durable ABS colourfast and a UV stabilised plastic surface
  • Responsibly sourced birch real timber edges with matt lacquer for protection
  • Designed to safely clip on to the Iconic platform
  • Good Design Award winner 2019.

Specifications

Design

Range

Clipsal Iconic

Aesthetic name

Iconic Essence

Product or component type

rocker

Colour tint

ash grey (AG)

Product destination

switch

Physical

Type of packing

polybag

Quantity per set

set of 1

Sale per indivisible quantity

1

Fixing mode

clip-in

Marking

cooker

Height

23 mm

Width

23 mm

Depth

2 mm

Net weight

0.01 kg

Ambient air temperature for operation

0-45 °C

Relative humidity

10-95 %

EU RoHS Directive

Under investigation

Others

Unit Type of Package 1

PCE

Number of Units in Package 1

1

Package 1 Weight

1.88 g

Package 1 Height

10 mm

Package 1 width

18 mm

Package 1 Length

23 mm
Show all specifications

Frequently Asked Questions

hide show

What size hole saw is required for the 240CA ?

As  per installation instructions use a 63mm hole saw to cut holes.

How to implement more than 8 Read_Reg_QX blocks in one cycle to read X80 modbus salve?

The 140CRP module can only implement 8 explicit messaging per cycle, so if using Read_Reg_QX through CRP to read NOM, only 8 Read_Reg_QX can be implemented in one cycle.
The NOE module can implement 16 explicit messaging per cycle, so using NOE interlink CRP could improve the capability of explicit massaging implementation.
But Read_Reg_QX block doesn't support to use with NOE module, the workaround is to use MBP_MSTR with Functioncode 15 to read X80 modbus salve through NOE interlink CRP.

Please refer to attached document to show you how to use MSTR with Function Code15.

"Couldn't determine unit type based on ModelNum" when using EM4800 configuration tool

Issue
When connection to EM4xxx meters using the EM4800 configuration tool, an error message pops up:
"Couldn't determine unit type based on ModelNum xxxxxxxx-xx-xx"


Product Line
EM4xxx series meters

Environment
Meter configuration 

Resolution
Un-install the current version of EM4800 Configuration Tool that you have installed and re-install the latest version of the tool.
Latest version of the tool from the following link:
​This config tool supports the new Demand feature released with meter firmware revision 1.46
* IMPORTANT NOTICE: This version is NOT measurement Canada Approved.
 

How is the 50C rating accomplished in the Enclosed ATS22 Soft Start Controllers?

Issue:
Customer ordered an Enclosed Altistart 22 and there is no circulating fan inside the enclosure.

Product line:
Enclosed ATS22, Altistart 22

Environment:
NEMA 1 and NEMA 12 enclosed. 

Cause:
Customer has ordered but found no circulating fan inside.

Resolution:
Engineering uses an oversized ATS22 softstart with de-rating based on temperature instead of adding a cooling fan.

Example: 
ATS22C14S6U has 124 nominal motor current. We want 52C rating, so over nominal temperature (40C) by 12C. 
We have a derating of 2.2% for every 1C over 40C.
52-40= 12.  
12x2.2% = 26.4%. 
26.4% of 124 = 32.24.  
32.24 is the deduction for the 124 nominal motor current of ATS22C14S6U. So the ATS22C14S6U has only rated to 91.76A motor in 52C temperature.