Quantcast

Medilec Isolation Transformers, 240V, 4.8kVA, Encapsulated

Medilec Isolation Transformers, 240V, 4.8kVA, Encapsulated

Medilec Isolation Transformers, 240V, 4.8kVA, Encapsulated

Item Number: E14/48/2

Retail
$5,102.69
RRP (Inc. GST)

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Range of product

  • Medilec
  • ESP Metal Plate Series
  • Series E14
    • Product brand

      Clipsal

      Physical

      [In] rated current

      20 A

      Others

      Primary voltage

      240 V AC

      Secondary voltage

      240 V AC

      Rated power in VA

      4800 VA

      Package 1 Weight

      45 kg
      Show all specifications

      Frequently Asked Questions

      hide show

      What is the difference between a encapsulated and a non encapsulated isolation tansformer in the medilec range?

      The encapsulated isolation transformer has its windings covered in heat-cured epoxy resin to reduce noise and prevent ingress of moisture and dust. Where for the non-encapsulated model has visible bare windings which are subject to dust and moisture.
      Encapsulated - E14/36/2 & E14/48/2
      Non Encapsulated - E14/36/3 & E14/48/3 
      For further information see link https://www.clipsal.com/search?q=E14

      Can the Primary and Secondary be run together on the e14/36/3

      - Can the Primary and Secondary be run together?
      Preferably not - but this is impacted by the distance they are run together. If the distance is short, i.e. a few metres then not a problem. If it is more distance then need to segregate. It is difficult to give an exact answer as there are dependencies. If they were separate by 1m then any distance would be ok.

      - Is segregation required, and if so what is the advised segregation distance and type (conduit etc)
      As above - at least 1m would meet all circumstances. Type of conduit does not really matter as the distance provides the segregation rather than any shielding from conduit.
      Please see following link for further information and related products
      https://www.clipsal.com/Trade/search-results?q=e14/36/3

      What replaces the line isolation and overload monitor E05/36/2 and E05/48/2?

      The part number for the line isolation and overload monitor is MLHG6. The MLHG6 line isolation and overload monitor replaces both E05/36/2 and E05/48/2.
      The MLHG6 requires a wall box, the part number for the wall box is MLHG6B-AU.
      Some of the key features are:
      • Programmable for current monitoring up to 100A
      • In-built test / verification module
      • Tracks data history of operational mode and faults
      • Fully approved to AS/NZS4510:1999 Isolated Electrical Supplies for Medical Uses
      • Meets requirements for AS/NZS3003:2011 Electrical Installations – Patient Areas of Hospitals
      • Potential to integrate into BMS
      For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=MLHG6
       

      Where can I find the UL document for TeSys U line starter and its accessories?

      Issue:
      Identify the UL document for TeSys U line starter and its accessories

      Product Line: 
      IEC Tesys U line Starter

      Environment:
      IEC Contactors and Starters 

      Resolution:
      The UL file number is E164862 and can be found through following link: https://iq.ulprospector.com/en/profile?e=80997