Quantcast

Dalicontrol Cable Locking Device to Di-T Connector and Joining of Di-Si Cable

Dalicontrol Cable Locking Device to Di-T Connector and Joining of Di-Si Cable

Dalicontrol Cable Locking Device to Di-T Connector and Joining of Di-Si Cable

Item Number: DI-LD

Retail
N/A
RRP (Inc. GST)

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Product brand

Clipsal

Sustainable offer status

Green Premium product

Physical

REACh Regulation

Free of Substances of Very High Concern above the threshold

REACh free of SVHC

Yes

EU RoHS Directive

Pro-active compliance (Product out of EU RoHS legal scope)

Toxic heavy metal free

Yes

Mercury free

Yes

RoHS exemption information

Yes

China RoHS Regulation

 Pro-active China RoHS declaration (out of China RoHS legal scope)

Environmental Disclosure

envpep090103en

Frequently Asked Questions

hide show

What current can the DI-SS carry?

The DI-SS starter socket is rated at 20A.

Video: Disabling Ethernet Network Connectivity on TeSys T Motor Management System

There is no setting in the software to disable the ethernet network. On the Tesys T you actually use hardware to disable the network. There are two dials on the face of the device, a Tens dial and a Ones dial. On the Ones dial, choose the Disabled setting and then power cycle the Tesys T. The device will no longer look for a network and will not give the Network settings warning.


 

Does Schneider Electric offer replacement jog dials for the ATV12 drive?

Issue:
Replacement jog dial for the ATV12 drive

Product Line:
Altivar Machines, Altivar 12

Environment:
All models and serial numbers

Cause:
None

Resolution:
There are no jog dials available as a spare part for the ATV12 drive.

I connected a DVI-D to HDMI converter to display the HMIG5U onto a TV monitor but there is no signal on the TV. Why?

Issue:
I connected a DVI-D to HDMI converter to display the HMIG5U onto a TV monitor but there is no signal on the TV.  Why?

Product Line:
HMIG5U

Environment:


Cause:


Resolution:
DVI-D output on the HMIG5U does not support Hot Plug Detect (HPD). Even when the main unit power is on while connected to an external display, this product outputs the display signal as XGA. If the external display does not support XGA Input, the screen will not display.  

In other words, both the DVI-D to HDMI converter and the TV has to support the XGA (1024 x 768) resolution.  If it does not support the XGA resolution, it will not see the signal properly.  We recommend getting a DVI-D to HDMI converter and TV that will support the XGA resolution.

What are the adjustment ranges for the dials on an ATS01N2..LU/QN/RT?

For both the START TIME and STOP TIME dials, setpoint A is 1second and setpoint E is 10seconds.  There is a linear relationship from A to E setpoints.
For the INITIAL VOLTAGE dial, setpoint A is 30% and setpoint E is 80% of full voltage.  There is a linear relationship from A to E setpoints.
 

What are the adjustment ranges for the dials on an ATSU01N2..LT?

For both the START TIME and STOP TIME dials, setpoint A is 1second and setpoint E is 10seconds.  There is a linear relationship from A to E setpoints.
For the INITIAL VOLTAGE dial, setpoint A is 30% and setpoint E is 80% of full voltage.  There is a linear relationship from A to E setpoints.



CTA-ID : 2061385
Show More