Dalicontrol Cable Locking Device to Di-T Connector and Joining of Di-Si Cable

Dalicontrol Cable Locking Device to Di-T Connector and Joining of Di-Si Cable

Dalicontrol Cable Locking Device to Di-T Connector and Joining of Di-Si Cable

Item Number: DI-LD

Retail
N/A
RRP (Inc. GST)

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Product brand

Clipsal

Sustainable offer status

Green Premium product

Physical

REACh free of SVHC

Yes

EU RoHS Directive

Pro-active compliance (Product out of EU RoHS legal scope)

Toxic heavy metal free

Yes

Mercury free

Yes

RoHS exemption information

Yes

China RoHS Regulation

 Pro-active China RoHS declaration (out of China RoHS legal scope)

Environmental Disclosure

envpep090103en

Others

Package 1 Weight

0.01 kg

Package 1 Height

5 mm

Package 1 width

20 mm

Package 1 Length

20 mm
Show all specifications

Frequently Asked Questions

hide show

What current can the DI-SS carry?

The DI-SS starter socket is rated at 20A.

Video: Disabling Ethernet Network Connectivity on TeSys T Motor Management System

There is no setting in the software to disable the ethernet network. On the Tesys T you actually use hardware to disable the network. There are two dials on the face of the device, a Tens dial and a Ones dial. On the Ones dial, choose the Disabled setting and then power cycle the Tesys T. The device will no longer look for a network and will not give the Network settings warning.


 

What are the adjustment ranges for the dials on an ATS01N1..FT?

For the START TIME dial, setpoint A is 1second and setpoint E is 5seconds.  There is a linear relationship from A to E setpoints.
For the INITIAL VOLTAGE dial, setpoint A is 30% and setpoint E is 80% of full voltage.  There is a linear relationship from A to E setpoints.



CTA-ID : 2061387

Does Schneider Electric offer replacement jog dials for the ATV12 drive?

Issue:
Replacement jog dial for the ATV12 drive

Product Line:
Altivar 12 drives

Environment:
All models and serial numbers

Cause:
None

Resolution:
There are no jog dials available as a spare part for the ATV12 drive.

I connected a DVI-D to HDMI converter to display the HMIG5U onto a TV monitor but there is no signal on the TV. Why?

Issue:
I connected a DVI-D to HDMI converter to display the HMIG5U onto a TV monitor but there is no signal on the TV.  Why?

Product Line:
HMIG5U

Environment:


Cause:


Resolution:
DVI-D output on the HMIG5U does not support Hot Plug Detect (HPD). Even when the main unit power is on while connected to an external display, this product outputs the display signal as XGA. If the external display does not support XGA Input, the screen will not display.  

In other words, both the DVI-D to HDMI converter and the TV has to support the XGA (1024 x 768) resolution.  If it does not support the XGA resolution, it will not see the signal properly.  We recommend getting a DVI-D to HDMI converter and TV that will support the XGA resolution.

What are the adjustment ranges for the dials on an ATSU01N2..LT?

For both the START TIME and STOP TIME dials, setpoint A is 1second and setpoint E is 10seconds.  There is a linear relationship from A to E setpoints.
For the INITIAL VOLTAGE dial, setpoint A is 30% and setpoint E is 80% of full voltage.  There is a linear relationship from A to E setpoints.



CTA-ID : 2061385

What are the adjustment ranges for the dials on an ATS01N2..LU/QN/RT?

What are the adjustment ranges for the dials on an ATS01N2..LU/QN/RT?


Issue:

Adjusting Altistart 01 Soft Starters


Product Line:
Altistart 01


Environment:
All


Cause:
N/A


Resolution:

For both the START TIME and STOP TIME dials, setpoint A is 1second and setpoint E is 10seconds.  There is a linear relationship from A to E setpoints.
For the INITIAL VOLTAGE dial, setpoint A is 30% and setpoint E is 80% of full voltage.  There is a linear relationship from A to E setpoints.
 

What is the most secure method of Remote Access to my PLC?

The most secure method is to dial into a Remote Access Server (RAS), that requires authentication with Dial-Back access. This assures the once authentication has been validated, that a predefined telephone number will be dialed back for a connection.


Legacy KB System (APS) Data: RESL173799 V1.0, Originally authored by on , Last Edited by on
Related ranges: Modicon Quantum

What is the difference in the Auto 1 and Auto 2 dials of the Powerpact H and J magnetic only mcp breaker?

Issue:
What do the Auto 1 and 2 dials mean on a Powerpact H and J magnetic only breaker?

Product Line:
Circuit breakers

Environment:
Applies to Powerpact H and J magnetic only circuit breakers

Resolution:
The auto 1 and 2 dials are for the types of motors.
Auto 1 is for squirrel cage type motors with codes a,b,c,d.
Auto 2 is for EE motors with codes b and e.

PME 9. The dials in vista doesn’t show. In web applications they do.

The dials in vista doesn’t show. In web applications they do.
 
Here is the picture in the  7.2.2 system


Here in the 9.0




Resolution

The Vista problem with the dials is due to the Region 'Format' setting. On my VM, it is set to English (Denmark). Change it to English (United States) and the dials come back. 
Many of those 'English (<some country)' variants are considered custom cultures, but I am not 100% sure of that. I will do some testing. 
I BUG was logged.  --See external reference -- 

Could you check the regional setting on your customer's server? - the Formats and the Location tabs. L4 found that some combinations do not work. L4 first though that it was the 'period' used as the time separator in English (Denmark), but then discover that using Location = South Africa and Format = English (South Africa) has the same problem and this may be what they are using. If ypu are OK with changing Format to English (United States), that should fix your problem. Or maybe English (Canada). That also works, and the date format is closer to the South Africa version. 

Video: How to configure Harmony XVU Tower Light color and illumination settings

Product Line:
XVU Tower/Stack Light XVUC29

Resolution:
On page three of three in the included instructions you will find two boxes.One labled Dial "A" and one labeled Dial "B." Using these tables, select the features that you want. Then set the dials marked "A" and "B" on the top of your XVU unit to match your requirements. To change the dials you will need to use a small, flathead screwdriver.

How is the ATV12 programmed to run via logic input on LI1 and adjust speed via dial?

Issue:   How is the ATV12 programmed to run via logic input on LI1 and adjust speed via dial?
 
Product Line:   ATV12
 
Environment:  All
 
Cause:   Terminal command with local reference
 
Resolution:   
Wire the run contact to +24 - LI1.
In the CtL menu, set Fr1 = AIV1, CHCF = SEP and Cd1 = tEr.
Press the dial twice to adjust speed as a percentage of the range LSP - HSP.


 
Show More