Clipsal Wiser Hub Table Stand Docking Kit

Clipsal Wiser Hub Table Stand Docking Kit

Clipsal Wiser Hub Table Stand Docking Kit

Item Number: CLP501902_0001

RRP (Inc. GST)

The Wiser Hub Table Stand is an optional stand for placing the Wiser Hub on a table or other flat surface.

Product Dimensions

Width icon

Width86 mm

Height icon

Height86 mm

Depth icon

Depth54.6 mm


Wiser Technical Catalogue

Download (PDF 2.2MB)



Range of product


Product or component type

table stand

Device application


Colour tint


Sustainable offer status

Green Premium product


Range compatibility



86 mm


54.6 mm


86 mm

Ambient air temperature for operation

-10-45 °C

Relative humidity

10-90 %

Environmental characteristic

  • UV resistant
  • indoor use
    • REACh Regulation

      Free of Substances of Very High Concern above the threshold

      REACh free of SVHC


      EU RoHS Directive


      Mercury free


      RoHS exemption information


      China RoHS Regulation


      Environmental Disclosure


      Circularity Profile


      Documents & downloads

      hide show
      Filter items
      • All

      • Installation Instruction

      • Operating Manuals

      Frequently Asked Questions

      hide show

      How do I swap my Wiser connected switch and dimmer devices from BLE to Zigbee?

      To swap from Bluetooth to Zigbee you will need to short press the mechanism 12 times - and allow time for the device to swap modes, this will take roughly 40 seconds. Initially when swapped to Zigbee mode the LED indicator on the mechanism will flash amber indicating it is in pairing mode. If not paired to after roughly 50 seconds this will become solid amber. This amber indicator will remain on until paired with a Hub, the mechanism will function as normal while this indicator is on.

      NOTE: Before swapping from Bluetooth/BLE to Zigbee it is strongly recommended that a factory reset be performed on the mechanism before initiating the change.

      In the Wiser by SE App, why is my device/s (BLE/Zigbee) greyed out?

      Check if you have changed the device/s from BLE to Zigbee mode. Once the mode is changed, the device will lose connection and require manual deletion.

      Zigbee – Check that your router, device and Hub are powered. If you are not connected to the local WiFi associated with the Hub you will also need to check if your router and hub are still connected to the internet.

      BLE – Check if you are in range of the device and does the device still have power

      Can 2 way dimming be operated with push button dimmer 4061E2PUDM?

      No, unfortunately this is not possible as it is a 1 way mechanism. When power is lost to this mechanism it is restored to its off state wich can ONLY be triggered by that switch and not an additional switch.
      If Multi-way pushbutton dimming is required it is recommended to use the Wiser Micro Dimmer Module and Bell press mechanisms ( CLP5010-0001 and 60PBBP)
      This setup allows a short press to turn on and off the dimmer while a long press will ramp up or ramp down the dimmer.( see attached for wiring diagram)
      For further information please visit https://www.clipsal.com/products/detail?CatNo=CLP5010-0001&backto=/search?q=CLP&tab-document-1=0&itemno=CLP5010-0001
      Wiser micro module dimmer


      Is there a 2-Way Pushbutton Dimmer in the Saturn/ ZEN Series?

      No unfortunately there is no 2-way pushbutton dimmer in the Saturn/ Saturn ZEN Series. However this function can be obtained through the use of our Wiser Micro Module Dimmer. 

      This setup works by a Saturn/ Saturn ZEN (60 Series) momentary press mechanism (60PBBP) is connected to the Wiser Micro Module (CLP5010-0001) which is "floating" in the wall cavity. This setup allows a short press to turn on and off the dimmer while a long press will ramp up or ramp down the dimmer.

      Please see the attached wiring diagram.
      Clipsal Wiser Hub Table Stand CLP501902_0001


      • Optional docking kit
      • Attach Wiser Hub and place on table top
      • White with rubber base
      Wiser products in kitchen


      A Clipsal Wiser Smart Home enables you to personalise your home to fit your needs and manage it with one simple app. It’s a simple solution that can be easily integrated into any home, old or new.

      All Wiser Smart Home products are also compatible with most of Clipsal’s existing wiring devices, including the Iconic switch range, making design and function upgrades simple and seamless.

      With Google Home or Amazon Echo, you can also control your Clipsal Wiser Smart Home with voice commands.

      With a Clipsal Wiser Smart Home, you can take control of your home the way that it suits you.