Yes it will fit into 2025XA / C2025XA, with the following mounting hardware only: 154, 154RM, 154/1, 155NAR, 155VNAR, 155PRM, 156/2, 157, 164, 449A. Will not fit SC2025XA / 25XA. ( Also please note that it will need to be placed into plate in vertical configuration)
For more information on the 30USBCM please visit the Clipsal web site or click link provided .https://www.clipsal.com/Trade/search-results?q=30usbcm
The part number for cover is C2025C.
No, the Chrome cover is not available for a SC2025XA.
The C2025VXA has been redesigned. The latest versions will require C2025VXC2-**
** - colour code
The part name is 2025XAPID-WE
C2025XC - available in White (WE), Brushed Aluminium (BA), Chrome (CH) and Gold (GD).
Yes however the USB mech must be placed on its side. using parts C2025XUA 30USBCM
Yes, the 30USBCM
charger will fit in to the SC2025XA. However, there is a plastic tab on the SC2025XA
that needs to be removed with a pair of pliers.
Once the tab is removed the USB mechanism will then fit.
Some of the key features are:
- Fit up to three USB Charger Mechs per plate.
- Available as a single mech or in a variety of pre-assembled Clipsal Wall Plate combinations.
- Match coloured plates with compatible colour caps, to suit decor or identify type of power in a commercial environment.
- Able to be retrofitted, quickly, into Clipsal Wall Plates with 30 Mech apertures.
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=30USBCM
No , We have sinlge outlets with USB chargers or you can fit 1 x USB charger mech to either a 2025XA or a C2025XA ( in vertical configuration )
For further information on this please visit the clipsal web site on the link provided
** - colour of the cover plate Eg: WE, BA
60R32 depending on the colour of the mechanism will suit 4025XA, 4025XUA in the saturn range and Z4025XA, Z4025XUA in the Saturn Zen range. It will not fit into any other switch plates in the Saturn or Saturn Zen range.
For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=60R32
No - The C2025RCD is horizontal only
Not available, cover plates only available for C2025RC (no D)
Yes, Part is available as a special C2025SI.
Covers for the SC2025XA are not available as a standard item but may be requested through our specials department.
For more information on the Slimline SC2000 range please visit the Clipsal.com web site on the link provided.
They are positioned above the outlet.
No, unfortunately the closest we can do is chrome shadow. The colour code is 3S.
Soft Grey, see page 74 of 92 edition for full colour scheme range
The part number for a slimline double GPO with an extra , removable , switch mech is - SC2025XA
But because Slimline is no longer available Iconic 3025XA (PDL395X) is the next slimest option, or Classic C2025XA if you prefer the Slimline look.
In order to achieve a removable switch option in the slimline range the product requires to be thicker than the rest in the slimline family.
SC2025XA Twin Switch Socket Outlet, Slimline, 250V, 10A, Removable Extra Switch
Catalogue Number: SC2025XA
Slimline Socket Twin with Extra Removable Switch .
Please see below link for further details.
No, unfortunately at this point in time they are not available as a part. However, this part can be ordered as a special but it needs to be lodged as a quotes request.
Some of the SC2025XA's key features are:
- Classic, sliced extra thin switch
- Removable extra switch
- 250V AC
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=SC2025XA
Although not recommended but yes it can be done. When doing this make sure all wiring is complete before inserting USB mechanism in place due to the fact that you will not be able to access the Active terminal.
Also this cannot be used with a standard wall plate it is recommended to use a 154 c clip to install as the wall plate hits the top of the mechanism.
Please following the link for a picture and specifications:
The part number for the cover to suit the SC2025X is the SC2025C
Some of the key features are:
- Slimline Classic series
- Suits the double powerpoint as well as the double powerpoint with extra non removable switch
- Multiple colours available
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=SC2025C
Yes, it is a 30M mech and can be two way wired
Yes, the 60R32 series are designed only to be fitted into the 4025XUA and 4025XA series
The part number for the 32 amp mech to suit a 4025XUAIt is the 60R32-3A.
No , The 60R32 series mechs are only designed to go into the 4025XA and 4025XUA plate styles. If Mechs over 32 amp are required for Saturn plates then you will need either 4031VH plate and 30M35 series mechs or the dedicated cooker plates 4061D32 or 4061/45 series
This will not fit as not a standard mech size