Quantcast

Max 4 Strip Connectors, 20A, 12 Terminal, Double Entry, 2 Way, Platform Bakelite

Max 4 Strip Connectors, 20A, 12 Terminal, Double Entry, 2 Way, Platform Bakelite

Max 4 Strip Connectors, 20A, 12 Terminal, Double Entry, 2 Way, Platform Bakelite

Item Number: BP7

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Product brand

Clipsal

Range of product

Blue Point

Physical

[In] rated current

20 A

Connector type

  • 1 screw terminals
  • 2 screw terminals

Number of poles

12

Mounting support

panel

Width

25 mm grid pattern:

Length

136 mm

Ambient air temperature for operation

190 °C

EU RoHS Directive

Compliant

Mercury free

Yes

RoHS exemption information

Yes

China RoHS Regulation

Product out of China RoHS scope. Substance declaration for your information

Environmental Disclosure

ENVPEP121019EN

Material

Material

bakelite: insulation

Others

Distance between centers

hole: 10.6 mm

Cable cross section

6 mm² fine stranded without cable end sleeve

Minimum mounting height

17 mm

Unit Type of Package 1

PCE

Number of Units in Package 1

1

Package 1 Weight

66.2 g

Package 1 Height

1.7 cm

Package 1 width

2.5 cm

Package 1 Length

13.9 cm
Show all specifications

Frequently Asked Questions

hide show

Troubleshooting steps to perform when "Please check that the USB cable between your battery backup and PC is properly connected" message or "Unknown Device" appears after a reboot of your computer.

Issue:

"Please check that the USB cable between your battery backup and PC is properly connected"  or "Unknown Device"


Product Line:

BACK-UPS ES, BACK-UPS CS, BACK-UPS USB, BACK-UPS PRO, BACK-UPS NS, BACK-UPS XS, BACK-UPS RS


Environment:

This problem may occur with the following APC Battery Back-UPS:
BE350U, BE500U, BE725BB, BE450G, BE550G, BE650G1, BE750G, BP350UC, BP500UC, BP500CLR, BP700UC, BK350, BK500,
BX1000x, BX1500x, BR1000x or BR1500x.


Cause:

Windows 98/ME: hidclass.sys, hidparse.sys, hidusb.sys
Windows 2000 or XP: hidclass.sys, hidparse.sys, hidusb.sys, hid.dll, pid.dll
Note: All of these drivers must be the same version. These drivers can be installed from your corresponding Windows CD.


Resolution:

1. Ensure that the USB communication cable is properly attached between the UPS and your PC.

2. Check to see if the UPS shows up as an Unknown Device in the Device Manager. (Start - Settings - Control Panel - System - Device Manager) Once in Device Manager click on the drop-down box to the left of Universal Serial Bus Controllers. Does Unknown Device show up here? If so, right click on this device and choose the uninstall option.

3. Disconnect the USB cable from your PC.

4. Shut down the PC.

5. Cycle power to the UPS by turning off and turning on the UPS. Note: Ensure the PC has completed shutting down prior to cycling power to the UPS.

6. Once the UPS has come back to the on-line mode of operation you can reboot your PC.

7. Once your PC has completely finished rebooting plug the USB cable back into your PC.

8. Ensure that your PC properly recognized the APC UPS correctly. To determine this access the Device Manager. Do you see listings as Batteries and Human Interface Device? If so, the PC did recognize the UPS correctly. If not, you'll need to ensure that the HID drivers are already installed. The operating systems and corresponding drivers are as follows:

9. If the USB cable is plugged into a USB hub try plugging the USB cable directly into the USB port on the PC itself.

10. If other USB devices are connected to the PC disconnect these devices before connecting the UPS USB cable and retry steps 1-8.

11. Reboot your PC. After reboot, did your PC recognize the UPS or are you still receiving the initial message of ""Please check that the USB cable between your battery backup and PC is properly connected""? If so, there are a few parameters of your PCs BIOS that need to be changed in order for your PC to recognize the USB device as an APC UPS after each boot. These changes are as follows:

Advanced Power Management Needs to be disabled
USB Legacy Device Needs to be enabled

Note: An APC representative cannot make changes or assist customers in making changes to the BIOS, as it is a liability to APC. The BIOS of your PC is both manufacturer and model specific. Consultation with the Original Equipment Manufacturer is advised in making these changes.

 

What's the difference between a regular Home member, an Administrator and the Homeowner?

The Homeowner has access to all functions. Administrator has access to all functions except the ability to transfer the homeowner rights, delete the home and granting administrator rights to other members. A common member only has access to operate devices, receive notifications (alarm, moment/automation trigger, device added/removed and invite) from a home, configure device settings and schedules.

I’m building a new home and have been thinking about installing smart home controls, but my budget is already stretched, and I really don’t think I can afford it…

Having a smart home doesn’t need to be expensive or extensive. With a range of scalable options, Clipsal makes smart living accessible to everyone.

Simply choose the smart home solution that works for you, your lifestyle and budget – whether that be two switches and a few smart sockets, or the whole nine yards. 

Clipsal offers in-home Bluetooth control and full out-of-home control via C-Bus, so you can opt for as little – or as much – connectedness as you like.

Clipsal also offers some clever electrical accessories; start building your smart home with Infrascan Motion Sensors to save energy by never accidentally leaving the lights on. You may also enjoy using timers, time-clocks and dimmers.

On the higher end of smart home solutions, C-Bus gives you the ability to control lighting, irrigation, air conditioning, multiroom audio, windows and blinds, home theatre, home security, keyless entry and more.

See what smart home solutions are available