Quantcast

Max 4 Connector Blocks, 20A, 2 Way, Triple Entry Single Unit

Max 4 Connector Blocks, 20A, 2 Way, Triple Entry Single Unit

Max 4 Connector Blocks, 20A, 2 Way, Triple Entry Single Unit

Item Number: BP303

Retail
$7.73
RRP (Inc. GST)

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Product brand

Clipsal

Range of product

Blue Point

Product or component type

connector block

Physical

[In] rated current

20 A

[Ue] rated operational voltage

500 V

Connector type

screw terminals

EU RoHS Directive

Compliant

Mercury free

Yes

RoHS exemption information

Yes

China RoHS Regulation

Product out of China RoHS scope. Substance declaration for your information

Others

Number of Units in Package 1

1

Package 1 Height

15 mm

Package 1 Length

33 mm

Package 1 width

28 mm

Unit Type of Package 1

PCE

Cable cross section

2 x 2.5-2.5 mm²

Package 1 Weight

18 g
Show all specifications

Frequently Asked Questions

hide show

Is part number BP30F still available?

No. Unfortunatelythis part is no longer available nor a replacement.

Getting E4303 on the LXM32

Issue:
Getting E4303 on the LXM32

Product Line:
LXM32

Resolution:
This means that the LXM32 drive cannot monitor the temperature of the motor. It's a warning that shows when using certain 3rd party motors.

Can the Quantum 140CPU11303 be programmed in both IEC and 984LL using Concept?

Issue:
Capability of having 984 LL or IEC program loaded into the 11303 Quantum processor.

Product line:
Quantum

Environment:
Concept software

Resolution:
Yes. The 140CPU11303 will support a hybrid application including both 984LL or IEC depending on the exec firmware loaded into the controller.
This would not be possible with the 140CPU11302 processor due to its limited memory.

NOTE: The Quantum processors are obsolete and the recommended replacement would be the M580 and the I/O can stay in place or be upgraded to the x80 I/O and Unity Pro will concert the program to the M580. For more information on this contact your local distributor.

A customer will connect several motors in parallel for conveyor application, and they will be driven by a ATV68C23N4. However, the total motors' ratin...

Goals and Symptoms

A customer will connect several motors in parallel for conveyor application, and they will be driven by a ATV68C23N4. However, the total motors' rating current is less than ATV68C23N4's current. How to setup the motor data in Menu B3 for this case? Is there any particular parameter setting need to be configured for this motor parallel case?

Causes and Fixes

For this application there is some restrictions :

- need to have same motors
- same cabe lenght for each motor

However, for the B3 menu :
B3.00 = global power ( sum of motors )
B3.01 = global current
B3.02 = nominal voltage
B3.03 = nominal frequency
B3.04 = nominal speed
B3.05 = nominal network voltage

And make a tune only if you have exactly same motors.


Legacy KB System (APS) Data: RESL161617 V1.0, Originally authored by on , Last Edited by on
Related ranges: Altivar 68

Does Schneider Electric offer a replacement for the Berger Lahr WPM-311 controller?

The entire product line of WPM-311 type controllers from Berger Lahr are obsolete and no longer available
Schneider Electric does not offer a drop in replacement.

The Berger Lahr WPM311 uses a special programming environment which was unique to Berger Lahr ( Depending on the firmware, Bpro3 programming system or ProOed3 Programming system )

The WPM311 is a 4 axis motion controller that utilizes pulse/direction type outputs which were most commonly used to interface with stepping motor drives.

So to replace the WPM311 you will have to not only find a controller that is capable of controlling multiple axis, but you will also have to write a motion program that duplicates the current application process.

You may try contacting the OEM machine builder, they may have spare WPM311 controllers or they may have already developed a retrofit solution.  

Service is still available at the Schneider Electric Repair Center in Greensboro NC


rev 2-20-18

Does Schneider Electric offer a replacement for the Berger Lahr WPM-311 controller?

The entire product line of WPM-311 type controllers from Berger Lahr are obsolete and no longer available
Schneider Electric does not offer a direct replacement.

The Berger Lahr WPM311 uses a special programming environment which was unique to Berger Lahr ( Depending on the firmware, Bpro3 programming system or ProOed3 Programming system )

The WPM311 is a 4 axis motion controller that utilizes pulse/direction type outputs which were most commonly used to interface with stepping motor drives.

To replace the WPM311 you will need a controller that is capable of controlling multiple axis, and you must write a motion program that duplicates the current application process.

You may try contacting the OEM machine builder, they may have spare WPM311 controllers or they may have already developed a retrofit solution.  

Service is still available at the Schneider Electric Repair Center in Greensboro NC.


Rev 8-8-17
Show More