Max 4 Blue Point Substitutes for Deleted Dandl Line Taps, Suit 50mm� Cable

Max 4 Blue Point Substitutes for Deleted Dandl Line Taps, Suit 50mm� Cable

Max 4 Blue Point Substitutes for Deleted Dandl Line Taps, Suit 50mm� Cable

Item Number: BP25

Retail
$32.86
RRP (Inc. GST)

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Product brand

Clipsal

Physical

Connector type

screw terminals

Type of cable

plain

EU RoHS Directive

Under investigation

Material

Material

brass: housing

Others

Unit Type of Package 1

PCE

Number of Units in Package 1

1

Package 1 Weight

101 g

Package 1 Height

35 mm

Package 1 width

31 mm

Package 1 Length

49 mm
Show all specifications

Frequently Asked Questions

hide show

What are some web cams supported by the HMIG5U/HMIG5U2?

Issue:
Is there a list of testd Web Cams supported by the HMIG5U/HMIG5U2?

Product Line:
HMIG5U/HMIG5U2

Resolution:

The following web cams have been tested on the HMIG5U and function well with the Vijeo Designer Runtime
 
Logitech Quick Cam Pro 4000
 
Logitech B525 HD
 
Embedded camera on Lenovo laptop

What size knock outs are provided with the GV2MC01 or GV2MC02 enclosure?

Issue:
GV2MC01 or GV2MC02 cable entry sizes

Product Line:
Tesys GV Manual Starter and Protectors enclosures

Environment:
PowerPact™ Manual Starters
 
Resolution:
Each enclosure has a total of four knockouts.  There are two concentric knockouts on top and  and two knockouts on the bottom.
Each knockout has an IP20 (20 mm) or IP25 (25 mm) hole available.

Does the NW-BP85-002 require any programming in order to commission the unit?

No. The BP85 does not require any programming. All the user has to do to commission the unit is to set the MB+ address dip switches for both networks and power up the unit.

Network issues may be experienced after performing a ProWORX Netscan with an XBTF installed (TSXMBP100)

Goals and Symptoms


Network issues may be experienced after performing a ProWORX Netscan with an XBTF installed (TSXMBP100)

====================

=> Concerned issues :
Using ProWORX Netscan:
Scan a Modbus+ network that contains one or more XBTF(s) equipped with MBP100 cards by means of:
1) The PC communicating to the PLC via Modbus and connecting to the Modbus Plus network via bridge mode.
2) Using Netscan on a network through a BP85 bridge that contains one or more XBTF(s) equipped with MBP100 cards.

----------------------------------

=> Symptoms :
Issues that may be experienced are :
1) When bridging from Modbus to Modbus Plus: Once the XBTF is querried the Netscan will slow down. After the Netscan is completed Modbus communication will appear to be locked up.
2) When bridging to another Modbus Plus network via a BP85: The Data Slave path will be held. If 8 Netscans are performed all 8 Data Save paths will be in use and no communication will occur in that direction.

=> Recovery :
Once the issue has been experienced the methods to restore are:
1) When bridging from Modbus to Modbus Plus: Power cycle of the PLC.
2) When bridging to another Modbus Plus network via a BP85: Power cycle of the XBTF or the BP85.

===================

=> Environment :
This patch is available for XBTL-1000 v4.30 and all XBT-F.
The modification has been integrated to XBTL1000 V4.40 and V4.42.
This patch is available for the TSXMBP100 hardware version 2.1 or higher.

Facts and Changes

Proworx - Concept - XBTF - XBTL1000 V4.30 - TSXMBP100 card release 2.1 (or more) - Bridge - scan - Modbus+

Causes and Fixes

=> This patch resolves the ProWORX Netscan issues that were described.

----------------------------------

=> Attached files :
The patch is composed of 3 files : MBPL070.XEX, MBPL080.XEX and xbtmbpl.des.

----------------------------------

=> Procedure to follow to install the patch :
The procedure to install the patch is :
1- close XBTL1000
2- in the XBTL1000 repertory (\program files\schneider electric\XBT-L1000\), rename the 2 already existing files "MBPL070.XEX" and "MBPL080.XEX" by replacing the ".XEX" by ".OLD". Rename the file "xbtmbpl.des" replacing the ".des" extension by ".OLD".
3- copy the 3 new files (MBPL070.XEX, MBPL080.XEX and xbtmbpl.des) in the XBTL1000 repertory (\program files\schneider electric\XBT-L1000\)
4- erase/format a pcmcia card
5- open XBTL1000, and download the application (by pcmcia or by cable)
6- test the application

Attachments

(Removed File URL: 168292_7BCA/patch.zip)(Removed Image URL: /PubResEXPORT.nsf/2b87ee90be777fc085257c28006ee4ef/34e35b2e93b02240c1256fd500388149/fl_block_5/0.1394?OpenElement&FieldElemFormat=gif)
The patch is composed of 3 files : MBPL070.XEX, MBPL080.XEX and xbtmbpl.des


Legacy KB System (APS) Data: RESL168292 V3.0, Originally authored by on , Last Edited by on
Related ranges: Magelis XBT F, TXBT F