Variable speed drive Altivar 71 UL type 1/IP20 three-phase supply voltage: 380…480V 50/60 Hz, 110 kW 150 HP

Altivar 71 Variable Speed Drive, 132kW, 200HP, 480V, EMC Filter-Graphic Terminal

Catalogue Number: ATV71HC13N4
Variable speed drive Altivar 71 UL type 1/IP20 three-phase supply voltage: 380…480V 50/60 Hz, 110 kW 150 HP
Colour:
Colour: Per UOM Std.
  • 1 PCE

Specifications

hide show
Range of product
Altivar 71
Product or component type
variable speed drive
Product specific application
complex, high-power machines
Component name
ATV71
Motor power kW
132 kW, 3 phases at 380...480 V
Motor power hp
200 hp, 3 phases at 380...480 V
Maximum motor cable length
  • 100 m shielded cable
  • 200 m unshielded cable
    • [Us] rated supply voltage
      380...480 V - 15...10 %
      Network number of phases
      3 phases
      Line current
    • 192 A for 480 V 3 phases 132 kW / 200 hp
    • 239 A for 380 V 3 phases 132 kW / 200 hp
      • EMC filter
        integrated
        Assembly style
        with heat sink
        Variant
        reinforced version
        Apparent power
        157.3 kVA at 380 V 3 phases 132 kW / 200 hp
        Prospective line Isc
        35 kA for 3 phases
        Nominal output current
      • 259 A at 2.5 kHz 380 V 3 phases 132 kW / 200 hp
      • 259 A at 2.5 kHz 460 V 3 phases 132 kW / 200 hp
        • Maximum transient current
        • 388 A for 60 s 3 phases 132 kW / 200 hp
        • 427 A for 2 s 3 phases 132 kW / 200 hp
          • Output frequency
            0.1-500 Hz
            Nominal switching frequency
            2.5 kHz
            Switching frequency
          • 2.5...8 kHz adjustable
          • 2.5...8 kHz with derating factor
            • Asynchronous motor control profile
            • voltage/frequency ratio (2 or 5 points)
            • sensorless flux vector control (SFVC) (voltage or current vector)
            • flux vector control (FVC) with sensor (current vector)
            • ENA (Energy adaptation) system for unbalanced loads
              • Type of polarization
                no impedance for Modbus
                Product destination
              • asynchronous motors
              • synchronous motors
                • Supply voltage limits
                  323-528 V
                  Supply frequency
                  50...60 Hz - 5...5 %
                  Network frequency
                  47.5...63 Hz
                  Speed range
                • 1-100 for asynchronous motor in open-loop mode, without speed feedback
                • 1-1000 for asynchronous motor in closed-loop mode with encoder feedback
                • 1-50 for synchronous motor in open-loop mode, without speed feedback
                  • Speed accuracy
                  • +/- 0.01 % of nominal speed in closed-loop mode with encoder feedback 0.2 Tn to Tn
                  • +/- 10 % of nominal slip without speed feedback 0.2 Tn to Tn
                    • Torque accuracy
                    • +/- 15 % in open-loop mode, without speed feedback
                    • +/- 5 % in closed-loop mode with encoder feedback
                      • Transient overtorque
                      • 170-170 % of nominal motor torque +/- 10 % for 60 s every 10 minutes
                      • 220-220 % of nominal motor torque +/- 10 % for 2 s
                        • Braking torque
                        • <= 150 % with braking or hoist resistor
                        • 30 % without braking resistor
                          • Synchronous motor control profile
                            vector control without speed feedback
                            Regulation loop
                            adjustable PI regulator
                            Motor slip compensation
                          • adjustable
                          • suppressable
                          • not available in voltage/frequency ratio (2 or 5 points)
                          • automatic whatever the load
                            • Local signalling
                              1 LED (red)drive voltage:
                              Output voltage
                              <= power supply voltage
                              Insulation
                              electrical between power and control
                              Type of cable
                            • with a NEMA Type1 kit: 3 wire(s)UL 508 cable at 40 °C, copper 75 °C / PVC
                            • with an IP21 or an IP31 kit: 3 wire(s)IEC cable at 40 °C, copper 70 °C / PVC
                            • without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 70 °C / PVC
                            • without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 90 °C / XLPE/EPR
                              • Electrical connection
                              • terminal, clamping capacity: 2.5 mm², AWG 14 (AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR)
                              • terminal, clamping capacity: 2 x 120 mm² (L1/R, L2/S, L3/T, U/T1, V/T2, W/T3)
                              • terminal, clamping capacity: 120 mm² (PA, PB)
                              • terminal, clamping capacity: 2 x 120 mm² (PC/-, PO, PA/+)
                                • Tightening torque
                                • 0.6 N.m (AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR)
                                • 24 N.m, 212 lb.in (L1/R, L2/S, L3/T, U/T1, V/T2, W/T3)
                                • 24 N.m, 212 lb.in (PA, PB)
                                • 24 N.m, 212 lb.in (PC/-, PO, PA/+)
                                  • Supply
                                  • internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection
                                  • internal supply: 24 V DC (21-27 V), <200 mA, protection type: overload and short-circuit protection
                                    • Analogue input number
                                      2
                                      Analogue input type
                                    • AI1-/Al1+ bipolar differential voltage: +/- 10 V DC 24 V max, resolution 11 bits + sign
                                    • AI2 software-configurable current: 0...20 mA, impedance: 242 Ohm, resolution 11 bits
                                    • AI2 software-configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, resolution 11 bits
                                      • Sampling duration
                                      • 2 ms +/- 0.5 ms (AI1-/Al1+) - analog input(s)
                                      • 2 ms +/- 0.5 ms (Al2) - analog input(s)
                                      • 2 ms +/- 0.5 ms (LI1...LI5) - discrete input(s)
                                      • 2 ms +/- 0.5 ms (LI6)if configured as logic input - discrete input(s)
                                        • Response time
                                        • <= 100 ms in STO (Safe Torque Off)
                                        • AO1 2 ms, tolerance +/- 0.5 ms for analog output(s)
                                        • R1A, R1B, R1C 7 ms, tolerance +/- 0.5 ms for discrete output(s)
                                        • R2A, R2B 7 ms, tolerance +/- 0.5 ms for discrete output(s)
                                          • Accuracy
                                          • +/- 0.6 % (AI1-/Al1+) for a temperature variation 60 °C
                                          • +/- 0.6 % (AI2) for a temperature variation 60 °C
                                          • +/- 1 % (AO1) for a temperature variation 60 °C
                                            • Linearity error
                                            • +/- 0.15 % of maximum value (AI1-/Al1+, AI2)
                                            • +/- 0.2 % (AO1)
                                              • Analogue output number
                                                1
                                                Analogue output type
                                              • AO1 software-configurable logic output 10 V 20-20 mA
                                              • AO1 software-configurable current 0...20 mA, impedance: 500 Ohm, resolution 10 bits
                                              • AO1 software-configurable voltage 0...10 V DC, impedance: 470 Ohm, resolution 10 bits
                                                • Discrete output number
                                                  2
                                                  Discrete output type
                                                • configurable relay logic: (R1A, R1B, R1C) NO/NC - 100000 cycles
                                                • configurable relay logic: (R2A, R2B) NO - 100000 cycles
                                                  • Minimum switching current
                                                    3 mA at 24 V DC for configurable relay logic
                                                    Maximum switching current
                                                  • R1, R2: 2 A at 250 V AC inductive load, cos phi = 0.4
                                                  • R1, R2: 2 A at 30 V DC inductive load, cos phi = 0.4
                                                  • R1, R2: 5 A at 250 V AC resistive load, cos phi = 1
                                                  • R1, R2: 5 A at 30 V DC resistive load, cos phi = 1
                                                    • Discrete input number
                                                      7
                                                      Discrete input type
                                                    • LI1...LI5: programmable 24 V DC with level 1 PLC, impedance: 3500 Ohm
                                                    • LI6: switch-configurable 24 V DC with level 1 PLC, impedance: 3500 Ohm
                                                    • LI6: switch-configurable PTC probe 0-6 , impedance: 1500 Ohm
                                                    • PWR: safety input 24 V DC, impedance: 1500 Ohm conforming to ISO 13849-1 level d
                                                      • Discrete input logic
                                                      • negative logic (sink) (LI1...LI5), > 16 V (state 0), < 10 V (state 1)
                                                      • positive logic (source) (LI1...LI5), < 5 V (state 0), > 11 V (state 1)
                                                      • negative logic (sink) (LI6)if configured as logic input, > 16 V (state 0), < 10 V (state 1)
                                                      • positive logic (source) (LI6)if configured as logic input, < 5 V (state 0), > 11 V (state 1)
                                                        • Acceleration and deceleration ramps
                                                        • S, U or customized
                                                        • automatic adaptation of ramp if braking capacity exceeded, by using resistor
                                                        • linear adjustable separately from 0.01 to 9000 s
                                                          • Braking to standstill
                                                            by DC injection
                                                            Protection type
                                                          • against exceeding limit speed: drive
                                                          • short-circuit between motor phases: drive
                                                          • thermal protection: drive
                                                          • motor phase break: motor
                                                          • power removal: motor
                                                          • thermal protection: motor
                                                          • against input phase loss: drive
                                                          • break on the control circuit: drive
                                                          • input phase breaks: drive
                                                          • line supply overvoltage: drive
                                                          • line supply undervoltage: drive
                                                          • overcurrent between output phases and earth: drive
                                                          • overheating protection: drive
                                                          • overvoltages on the DC bus: drive
                                                            • Insulation resistance
                                                              > 1 mOhm 500 V DC for 1 minute to earth
                                                              Frequency resolution
                                                            • analog input: 0.024/50 Hz
                                                            • display unit: 0.1 Hz
                                                              • Communication port protocol
                                                              • CANopen
                                                              • Modbus
                                                                • Connector type
                                                                • 1 RJ45 (on front face) for Modbus
                                                                • 1 RJ45 (on terminal) for Modbus
                                                                • male SUB-D 9 on RJ45 for CANopen
                                                                  • Physical interface
                                                                    2-wire RS 485 for Modbus
                                                                    Transmission frame
                                                                    RTU for Modbus
                                                                    Transmission rate
                                                                  • 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps for Modbus on terminal
                                                                  • 9600 bps, 19200 bps for Modbus on front face
                                                                  • 20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps for CANopen
                                                                    • Data format
                                                                    • 8 bits, 1 stop, even parity for Modbus on front face
                                                                    • 8 bits, odd even or no configurable parity for Modbus on terminal
                                                                      • Number of addresses
                                                                      • 1-127 for CANopen
                                                                      • 1-247 for Modbus
                                                                        • Method of access
                                                                          slave CANopen
                                                                          Marking
                                                                          CE
                                                                          Operating position
                                                                          vertical +/- 10 degree
                                                                          Height
                                                                          1190 mm
                                                                          Depth
                                                                          377 mm
                                                                          Width
                                                                          340 mm
                                                                          Net weight
                                                                          116 kg
                                                                          Functionality
                                                                          full
                                                                          Specific application
                                                                          other applications
                                                                          Option card
                                                                        • communication card for CC-Link
                                                                        • communication card for Modbus TCP
                                                                        • communication card for Modbus/Uni-Telway
                                                                        • overhead crane card
                                                                        • communication card for Profibus DP
                                                                        • communication card for Profibus DP V1
                                                                        • controller inside programmable card
                                                                        • communication card for DeviceNet
                                                                        • communication card for Ethernet/IP
                                                                        • communication card for Fipio
                                                                        • I/O extension card
                                                                        • communication card for Interbus-S
                                                                        • interface card for encoder
                                                                        • communication card for Modbus Plus
                                                                          • Noise level
                                                                            66 dB conforming to 86/188/EEC
                                                                            Dielectric strength
                                                                          • 3535 V DC between earth and power terminals
                                                                          • 5092 V DC between control and power terminals
                                                                            • Electromagnetic compatibility
                                                                            • 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
                                                                            • conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
                                                                            • electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
                                                                            • electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
                                                                            • radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
                                                                            • voltage dips and interruptions immunity test conforming to IEC 61000-4-11
                                                                              • Standards
                                                                              • EN 61800-3 environments 1 category C3
                                                                              • EN/IEC 61800-5-1
                                                                              • EN/IEC 61800-3
                                                                              • UL Type 1
                                                                              • IEC 60721-3-3 class 3C2
                                                                              • EN 55011 class A group 2
                                                                              • EN 61800-3 environments 2 category C3
                                                                                • Product certifications
                                                                                • NOM 117
                                                                                • GOST
                                                                                • CSA
                                                                                • C-Tick
                                                                                • UL
                                                                                  • Pollution degree
                                                                                  • 2 conforming to EN/IEC 61800-5-1
                                                                                  • 3 conforming to UL 840
                                                                                    • IP degree of protection
                                                                                      IP20
                                                                                      Vibration resistance
                                                                                    • 0.6 gn (f= 10-200 Hz) conforming to EN/IEC 60068-2-6
                                                                                    • 1.5 mm peak to peak (f= 3-10 Hz) conforming to EN/IEC 60068-2-6
                                                                                      • Shock resistance
                                                                                        7 gn for 11 ms conforming to EN/IEC 60068-2-27
                                                                                        Relative humidity
                                                                                      • 5-95 % without condensation conforming to IEC 60068-2-3
                                                                                      • 5-95 % without dripping water conforming to IEC 60068-2-3
                                                                                        • Ambient air temperature for operation
                                                                                          -10-50 °C (without)
                                                                                          Ambient air temperature for storage
                                                                                          -25-70 °C
                                                                                          Operating altitude
                                                                                        • <= 1000 m without
                                                                                        • 1000...3000 m with current derating 1 % per 100 m
                                                                                          • Sustainable offer status
                                                                                            Green Premium product
                                                                                            REACh Regulation
                                                                                            Free of Substances of Very High Concern above the threshold
                                                                                            EU RoHS Directive
                                                                                            Pro-active compliance (Product out of EU RoHS legal scope)
                                                                                            Mercury free
                                                                                            Yes
                                                                                            RoHS exemption information
                                                                                            Yes
                                                                                            China RoHS Regulation
                                                                                            X
                                                                                            Environmental Disclosure
                                                                                            ENVPEP091205EN
                                                                                            WEEE
                                                                                            The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
                                                                                            California proposition 65
                                                                                            WARNING: This product can expose you to chemicals including: Lead and lead compounds which is known to the State of California to cause Carcinogen & Reproductive harm. For more information go to www.p65warnings.ca.gov
                                                                                            Warranty
                                                                                            18 months

                                                                                            Documents & downloads

                                                                                            hide show
                                                                                            Filter items
                                                                                            • All

                                                                                            • CAD Files and Packs

                                                                                            • Product Brochures

                                                                                            • Technical Data Catalogues

                                                                                            • Product Environmental

                                                                                            • End of Life Manual

                                                                                            • Handout

                                                                                            • Operating Manuals

                                                                                            • eTechPub

                                                                                            • Certificates (MSDS)

                                                                                            • Marine Certificate

                                                                                            • DTM Files

                                                                                            • Software - Released

                                                                                            Frequently Asked Questions

                                                                                            hide show

                                                                                            Which ATV71 drives have the built in braking transistor?

                                                                                            Models with a rating of 160KW (250HP) or less have a built-in braking transistor.
                                                                                            ATV71H...M3, ATV71H...M3X and ATV71H075N4 to HC16N4 drives have a built-in dynamic brake transistor.
                                                                                            For ATV71HC20N4 to HC50N4 drives, a separate braking unit must be used.


                                                                                            CTA-ID : 2026409

                                                                                            What should be checked if an Altivar 61 or 71 display is showing NLP?

                                                                                            Issue:
                                                                                            What should be checked if an Altivar 61 or 71 display is showing NLP?

                                                                                            Product Line:
                                                                                            ATV61/71 drives

                                                                                            Environment:
                                                                                            All

                                                                                            Cause:
                                                                                            Drive displays 'NLP'

                                                                                            Resolution:
                                                                                            NLP indicates that no line power is present on the L1, L2 & L3 input terminals of the drive controller.

                                                                                            Check voltage at the L1, L2 & L3 terminals.
                                                                                            Check for open circuits on line contactors, circuit breakers, disconnect switches, or fuses.

                                                                                            If NLP state does not change with correct voltage present on L1, L2, & L3, remove the control board and check for loose connections of ribbon cables inside the drive.
                                                                                            WARNING: This step should be performed while the drive is powered down, and proper personal protective equipment should be worn. 

                                                                                            For example: In an ATV71HC25N4 a customer found a loose X3 connector from the control board to the board behind and above the control board. This connector was on a ribbon cable that was about 1 inch by 1 inch. Drive ran OK after this was reseated.

                                                                                            Is there a problem using Altivar 61 or Altivar 71 drives delta power system?

                                                                                            Issue:
                                                                                            IWants to use Altivar 61 or Altivar 71 drives on delta power system.

                                                                                            Product Line:
                                                                                            Altivar ATV61 and ATV71

                                                                                            Environment:
                                                                                            All

                                                                                            Cause:
                                                                                            Needs to know if the RFI filter needs to be disabled when using a corner grounded delta system?

                                                                                            Resolution:
                                                                                            As long as the input voltage remains within the normal range there should not be a problem.
                                                                                            This should be treated the same way as an impedance grounded system.
                                                                                            Remove the jumper to the left of the power terminal.
                                                                                            See the section of the installation manual for Operation on an IT (Isolated or impedance grounded neutral) system for details.
                                                                                            See the drives installation manual for more information and location of the RFI's filter tab.

                                                                                            The figure 1 example below is for the low horsepower ATV61 and ATV71 drives.


                                                                                                                                               Figure 1.

                                                                                             

                                                                                            Are the ATV61 or ATV71 drives available in type 4 or 4X enclosure?

                                                                                            Issue:
                                                                                            Are the ATV61 or ATV71 drives available in type 4 or 4X enclosure?

                                                                                            Product Line:
                                                                                            Altivar ATV61 and ATV71 open type drives

                                                                                            Environment:
                                                                                            All

                                                                                            Cause:
                                                                                            Needs to get the ATV61 and ATV71 drive in a NEMA 4 or 4X stand alone enclosure.

                                                                                            Resolution:
                                                                                            There is not a standard offering for type 4 or 4X enclosures for our drives.
                                                                                            It may be possible to install the drive in a properly selected enclosure by a local panel builder or contractor.
                                                                                            Or, contact a local SquareD field office for assistance. They may be able to offer assistance with other options.


                                                                                             

                                                                                            Can the analog output of the ATV61 or ATV71 be set up as 0-10 VDC instead of 4-20 mA?

                                                                                            Issue:
                                                                                            Can the analog output of the ATV61 or ATV71 be set up as 0-10 VDC instead of 4-20 mA?

                                                                                            Product Line:
                                                                                            ATV61 and ATV71

                                                                                            Environment:
                                                                                            All

                                                                                            Cause:
                                                                                            NA

                                                                                            Resolution:
                                                                                            Yes.
                                                                                            Go to the Input/Output menu (1.5) and set AO1 type to voltage (0-10v range). Set AO1 assignment to the proper setting. The minimum and maxim range can also be adjusted inside the 0-10 V or 4-20  mA ranges.


                                                                                             

                                                                                            Why is the keypad not included with ATV61 and ATV71 drives?

                                                                                            Issue:
                                                                                            Why is the keypad not included with ATV61 and ATV71 drives?

                                                                                            Product Line:
                                                                                            Altivar 61 and 71 drives

                                                                                            Environment:
                                                                                            All

                                                                                            Cause:
                                                                                            Customer concerned whether the HMI came with the drive

                                                                                            Resolution:
                                                                                            For all ATV61 and ATV71 drives without the letter Z at the end of the part number the keypad is included.
                                                                                            However, it is easy to not notice the keypad in the packaging material. The keypad is located inside folded cardboard that also functions as packing material. Check inside all folded cardboard packing materials. There is no sticker to indicate that the keypad is inside.

                                                                                            ATV61 & ATV71 drives with the letter Z at the end of the part number do not include the removable LCD HMI keypad display. These units do have a simplified LED display and programming keys on the face of the control board itself. The removable LCD HMI keypad display may be installed on these units.


                                                                                             

                                                                                            Do the electronic boards of the Altivar 61 and Altivar 71 drives have conformal coating?

                                                                                            Issue:
                                                                                            Do the electronic boards of the Altivar 61 and Altivar 71 drives have conformal coating?

                                                                                            Product Line:
                                                                                            Altivar ATV61 and ATV71

                                                                                            Environment:
                                                                                            Suffix S337 only

                                                                                            Cause:
                                                                                            Needs to know if you can order the ATV61 ATV71 drive with conformal coating?

                                                                                            Resolution:
                                                                                            For the ATV61 & ATV71 drives there is an option to have product treated for increased protection for dusty and corrosive environments. This product is not stocked. Add 'S337' to the end of the catalog number and multiply the listed price by 1.2 to obtain new price. With this option, exposed copper is tinned, circuit boards are conformal coated in critical areas and plastics are treated to better withstand the corrosive nature of certain oils. This option is standard on 55kW/75HP @ 230 Vac and higher & 90kW/125HP @ 460 Vac and higher.

                                                                                            The standard ATV61 and ATV71 drives are designed for maximum ambient pollution as follows:
                                                                                            ATV71:
                                                                                            H...M3, 71HD11M3X, HD15M3X, H075N4 to HD18N4 are Degree 2 conforming to IEC/EN 61800-5-1
                                                                                            HD18M3X to HD75M3X, HD22N4 to HC50N4 are Degree 3 conforming to IEC/EN 61800-5-1

                                                                                            ATV61:
                                                                                            H...M3, HD11M3X, HD15M3X, H075N4 to HD18N4 are Degree 2 conforming to IEC/EN 61800-5-1
                                                                                            HD18M3X to HD90M3X, HD22N4 to HC63N4 are Degree 3 conforming to IEC/EN 61800-5-1


                                                                                             

                                                                                            How many drive configuration files can be stored in the ATV71 keypad?

                                                                                            Issue:   How many drive configuration files can be stored in the ATV61 / ATV71 keypad?
                                                                                             
                                                                                            Product Line:   AT61 ATV61 VW3A1101
                                                                                             
                                                                                            Environment:  All
                                                                                             
                                                                                            Cause:   Number of file storage
                                                                                             
                                                                                            Resolution:   
                                                                                            The keypad can store up to 4 files.
                                                                                            To access and manage these files go to menu 1.12 (FACTORY SETTINGS) (FCS-)
                                                                                            See programming manual for details if needed.


                                                                                            CTA-ID : 2026818

                                                                                            What is the recommended Fuse or Circuit Breaker (OCPD) size for Altivar 61 drives?

                                                                                            Refer to the attached Quick Start Annex, document S1B86981. 
                                                                                             

                                                                                            When do the heatsink fans run on the ATV61 / ATV71 series drives?

                                                                                            Issue:
                                                                                            When do the heatsink fans run on the ATV61 / ATV71 series drives?

                                                                                            Product Line:
                                                                                            Altivar 61 and Altivar 71 series drives

                                                                                            Environment:
                                                                                            All models, All serial numbers.

                                                                                            Cause:
                                                                                            Information not available in current literature.

                                                                                            Resolution:
                                                                                            Heat sink fan operation differs depending on the frame size of the drive:
                                                                                            - for size 2 to 5B drives, fans start when the drive thermal state reaches a temperature level --> THD parameter = 70%.  The fans turns off when drive thermal is less than 60%
                                                                                            - for size 6 to 8 drives and 690V range drives, the fans run when the run command is given or when the drive thermal is greater than or equal to 70% and turns off when the drive thermal is less than 60% and runs for 1 minute after the run command is removed.
                                                                                            - for size 9 to 15 drives and 690V range drives, the fans run when the run command is given or when the drive thermal is greater than or equal to 70% and turns off when the drive thermal is less than 60% and runs for 10 minutes after the run command is removed.

                                                                                            For example, an ATV61HD18M3X drive (size 6), the heatsink fan starts when a Run command is given.


                                                                                             

                                                                                            Are the ATV61/71 high horsepower drives available without the DC choke?

                                                                                            Yes.  Add a D suffix to the drive part number.
                                                                                            For example:
                                                                                            ATV61HC22N4 includes a DC choke.
                                                                                            ATV61HC22N4D does not include a DC choke.

                                                                                            Note that if a DC choke is not used, a jumper wire, of sufficient current capacity, must  be installed between the PA and PO terminals.  A good rule of thumb is to use the same size wire that is on the DC choke for the jumper wire.   Also, if the DC choke is not used, a 5% line reactor ahead of the drive is Mandatory.  Failure to use a 5% line reactor ahead of the drive if no DC choke is present can result in damage to the drive that warranty does not cover.


                                                                                            CTA-ID : 2061651

                                                                                            What is the part number of the Main Control board for ATV71HD22N4?

                                                                                            Issue:
                                                                                            ATV71HD22N4:  Need to replace the Main Control board ?

                                                                                            Product Line:
                                                                                            ATV71

                                                                                            Environment:
                                                                                            ATV71HO75N4, ATV71HU15N4, ATV71HU22N4, ATV71HU30N4, ATV71HU40N4, ATV71HU55N4, ATV71HU75N4, ATV71HD11N4, ATV71HD15N4, ATV71HD18N4, ATV71HD22N4, ATV71HD30N4, ATV71HD37N4, ATV71HD45N4, ATV71HD55N4, ATV71HD75N4

                                                                                            Cause:
                                                                                            Need the Main Control board part number.

                                                                                            Resolution:
                                                                                            The Main Control board part number for these drive is VX4A71100Y

                                                                                            What is the part number of the replacement fan for an ATV16, ATV18, ATV28, ATV31, ATV11?

                                                                                            Issue:
                                                                                            What is the part number of the replacement fan for an ATV16, ATV18, ATV28, ATV31, ATV11?
                                                                                             
                                                                                            Product Line:
                                                                                            ATV16 ATV18 ATV28 ATV31 ATV11
                                                                                             
                                                                                            Environment:
                                                                                            All
                                                                                             
                                                                                            Cause:
                                                                                            Replacement parts
                                                                                             
                                                                                            Resolution: 
                                                                                            Field replacement parts are not offered for these drives. 
                                                                                            The drive may be sent in for depot analysis, repair and/or exchange within the warranty period.
                                                                                            Contact any SquareD distributor for assistance.
                                                                                            Distributors can contact customer service for RMA.


                                                                                             

                                                                                            Where can I find the spare parts manual for the ATV61HC16N4 and the ATV71HC13N4 drives?


                                                                                            Where can I find the spare parts manual for the ATV61HC16N4 and the ATV71HC13N4 drives?

                                                                                            Product line: 
                                                                                            Altivar ATV61HC16N4 and the ATV71HC13N4

                                                                                            Environment: 
                                                                                            ATV61HC16N4 and the ATV71HC13N4 

                                                                                            Cause:
                                                                                            Someone needs a copy of the services manual for the ATV61HC16N4 and the ATV71HC13N4 drives.

                                                                                            Resolution:
                                                                                            Instruction bulletin 30072-452-78
                                                                                             

                                                                                            What is the part number for the remote keypad for the ATV31?

                                                                                            Issue:   What is the part number for the remote keypad for the ATV31?
                                                                                             
                                                                                            Product Line:   ATV31
                                                                                             
                                                                                            Environment:  All
                                                                                             
                                                                                            Cause:   Remote keypad kit
                                                                                             
                                                                                            Resolution:   The Altivar 31 remote mount keypad kit is VW3A31101.
                                                                                            The kit includes a keypad, mounting hardware and a 3 meter cable.


                                                                                             

                                                                                            Are the EMC filters for ATV31 drives UL or cUL listed?

                                                                                            Issue:   Are the EMC filters for ATV31 drives UL or cUL listed?
                                                                                             
                                                                                            Product Line:   ATV31
                                                                                             
                                                                                            Environment:  All
                                                                                             
                                                                                            Cause:   UL/CUL listing
                                                                                             
                                                                                            Resolution:   No. VW3A31401, VW3A31402, VW3A31403, VW3A31404, VW3A31405, VW3A31406, VW3A31407, VW3A31408 and VW3A31409 are not UL or CUL listed.

                                                                                             

                                                                                            What are the part numbers of the measuring board for ATV61HC16N4 and ATV71HC13N4 drives?

                                                                                            Issue:
                                                                                            What are the part numbers of the measuring board for ATV61HC16N4 and ATV71HC13N4 drives?

                                                                                            Product Line:
                                                                                            ATV61 and ATV71

                                                                                            Environment:
                                                                                            All

                                                                                            Cause:
                                                                                            Failed measuing board component within the drive.

                                                                                            Resolution:
                                                                                            The part number for the measuring board is VX5A71HC13N4 or VX5A71HC13N4F (For Fuji parts)
                                                                                            When a replacement Measurement board is needed, the serial  number of the VFD needs to be verified.
                                                                                             
                                                                                            If the 8th digit of the Serial number is a "2" as shown below than the replacement part number must have an "F" suffix.
                                                                                            See the attachment.

                                                                                             

                                                                                            What is the spare part manual for the ATV61HD90M3X, ATV61HC13N4, ATV71HD75M3X and ATV71HC11N4?

                                                                                            Issue:
                                                                                            What is the spare part manual for the ATV61HD90M3X, ATV61HC13N4, ATV71HD75M3X and ATV71HC11N4?

                                                                                            Product line:  
                                                                                            ATV61HD90M3X, ATV61HC13N4, ATV71HD75M3X, ATV71HC11N4

                                                                                            Environment:  
                                                                                            Frame size 10: ATV61HD90M3X, ATV61HC13N4, ATV71HD75M3X, ATV71HC11N4

                                                                                            Cause:
                                                                                            None

                                                                                            Resolution:
                                                                                            Instruction bulletin 30072-452-77
                                                                                            See attachment

                                                                                            What is the part number for an ATV61H075N4, ATV61HU15N4, ATV61HU22N4, ATV71H075N4, ATV71HU15N4, ATV71HU22N4, ATV61H075M3, ATV61HU15M3, ATV71H037M3, ATV71H075M3, ATV71HU15M3 Type 1 Conduit Kit?

                                                                                            Issue:   What is the part number for an ATV61H075N4, ATV61HU15N4, ATV61HU22N4, ATV71H075N4, ATV71HU15N4, ATV71HU22N4, ATV61H075M3, ATV61HU15M3, ATV71H037M3, ATV71H075M3, ATV71HU15M3 Type 1 Conduit Kit?
                                                                                             
                                                                                            Product Line:   ATV61 ATV71
                                                                                             
                                                                                            Environment:   ATV61H075N4, ATV61HU15N4, ATV61HU22N4, ATV71H075N4, ATV71HU15N4, ATV71HU22N4, ATV61H075M3, ATV61HU15M3, ATV71H037M3, ATV71H075M3, ATV71HU15M3 
                                                                                             
                                                                                            Cause:   N1 conduit kit selection
                                                                                             
                                                                                            Resolution:   
                                                                                            VW3A9201.


                                                                                             

                                                                                            Can Class T fuses be used with Altivar 31 drives? The manual only references Class CC or J.

                                                                                            The ATV31 units were tested with the Class J fuses however the 600V version of the Class T fuses have equivalent ratings. So can use the 600V Class T fuses but not the 300V Class T fuses.

                                                                                            What is the SCR Snubber part number for an ATV61HC16N4 thru ATV61HC63N4 or ATV71HC13N4 thru ATV71HC50N4 drives?

                                                                                            Issue:
                                                                                            What is the SCR snubber part number for an ATV61/71 drive?

                                                                                            Product Line:
                                                                                            ATV61 and ATV71

                                                                                            Environment:
                                                                                            All serial numbers for ATV61 and ATV71

                                                                                            Cause:
                                                                                            Part number needed to order part.

                                                                                            Resolution:
                                                                                            VX4A1200 for Frame sizes 11 - 15
                                                                                            ATV61HC16N4 thru ATV61HC63N4 or ATV71HC13N4 thru ATV71HC50N4?

                                                                                            Is there a password to protect parameters in the ATV31 drive?

                                                                                            Issue:   Is there a password to protect parameters in the ATV31 drive?
                                                                                             
                                                                                            Product Line:   ATV31
                                                                                             
                                                                                            Environment:  All
                                                                                             
                                                                                            Cause:   Password
                                                                                             
                                                                                            Resolution:   Yes.
                                                                                            In the SUP menu, the COd parameter can be used to enter a numerical code that restricts access to adjustment parameters in the drive.  Only the display parameters are accessible, with only a temporary choice of the parameter displayed.

                                                                                             

                                                                                            How is the ATV31 set up to operate by remote keypad?

                                                                                            Issue:   How is the ATV31 set up to operate by remote keypad?
                                                                                             
                                                                                            Product Line:   ATV31
                                                                                             
                                                                                            Environment:  All
                                                                                             
                                                                                            Cause:   Remote keypad operation
                                                                                             
                                                                                            Resolution:   With the VW3A31101 remote keypad kit installed, go to menu CtL and set parameter LCC to YES.
                                                                                            NOTE:  LCC can only be accessed if the drive controller is equipped with a remote keypad display, and if LAC = L1 or L2.
                                                                                            This function enables control of the drive with the STOP/RESET, RUN, and FWD/REV buttons on the remote keypad display.
                                                                                            The speed reference is given by parameter LFr in the SEt- menu.
                                                                                            Only the freewheel stop, fast stop, and DC injection stop commands remain active on the terminal block.
                                                                                            If the remote keypad display is not connected, the drive controller will lock on an SLF fault.

                                                                                             

                                                                                            Does it matter where the pull up / pull down resistors are located within the ATV31 multiple drive network?

                                                                                            Issue:   Does it matter where the pull up / pull down resistors are located within the ATV31 multiple drive network?
                                                                                             
                                                                                            Product Line:   ATV31
                                                                                             
                                                                                            Environment:  All
                                                                                             
                                                                                            Cause:   Terminating resistor
                                                                                             
                                                                                            Resolution:   Not really.
                                                                                              
                                                                                            The ATV31 does not have internal pull up / down resistors for the rs-485 communications. Therefore, if it is used on a network with PLC that also does not have pull up-down resisitors for the RS485 resistors must be added at one of the devices.
                                                                                            At one drive add:
                                                                                            10k resistor between +10 (RJ45 pin 7) and D_B (Communication +, RJ45 pin 4)
                                                                                            10k resistor between D_B and COM (RJ45 pin 8)
                                                                                            4.7k resistor between COM and D_A (RJ57 pin 5)


                                                                                             

                                                                                            Why does RDY flash on the ATV31?

                                                                                            Issue:   
                                                                                            Why does RDY flash on the ATV31?
                                                                                             
                                                                                            Product Line:   
                                                                                            ATV31
                                                                                             
                                                                                            Environment:  
                                                                                            All serial numbers
                                                                                             
                                                                                            Cause:  
                                                                                            Customer said drive was flashing RDY.
                                                                                             
                                                                                            Resolution:   
                                                                                            Flashing display normally indicated current limit mode. However, if this is occurring in the ready mode, it is likely due to incorrect motor parameter settings.
                                                                                            Specifically, it could be that the COS (motor power factor) is set to 1.
                                                                                            OR
                                                                                            Check the +10 and +24 VDC power supplies. It could be that they are being pulled down.


                                                                                             

                                                                                            What are the dimensions for the ATV31 keypad in the VW3A31101 remote mount kit?

                                                                                            Issue:   What are the dimensions for the ATV31 keypad in the VW3A31101 remote mount kit?
                                                                                             
                                                                                            Product Line:   ATV31
                                                                                             
                                                                                            Environment:  VW3A31101
                                                                                             
                                                                                            Cause:   Dimensions
                                                                                             
                                                                                            Resolution:   The keypad is 2.77(H) and 1.98(W) inches.
                                                                                            The exterior dimensions for the mounting bracket is 4.19 (4 - 3/16) inches tall, 2.625 (2 - 5/8) inches wide


                                                                                             

                                                                                            Can the ATV31 be set up to operate with remote keypad command and still use an external speed pot to control the speed?

                                                                                            Issue:   
                                                                                            Can the ATV31 be set up to operate with remote keypad command and still use an external speed pot to control the speed?
                                                                                             
                                                                                            Product Line: 
                                                                                             ATV31
                                                                                             
                                                                                            Environment:  
                                                                                            All
                                                                                             
                                                                                            Cause:  
                                                                                            N/A
                                                                                             
                                                                                            Resolution:  
                                                                                             Yes. The drive can be set up to run by remote keypad to start and stop the unit while taking a speed reference from the Analog Input, AI1.
                                                                                            This function can be set up in the CtL menu.  Set parameter LAC to L3.  Set Fr1 to AI1,  CHCF to SEP, and Cd1 to LCC.  

                                                                                            See the Altivar 31 Adjustable Speed Drive Controllers Programming Manual, VVDED303042US, for details.

                                                                                             

                                                                                            What can cause the InF fault in the Altivar 31 and Altivar 312 drives?

                                                                                            Issue:
                                                                                            What can cause the InF fault in the Altivar 31 and ATV312 drives?

                                                                                            Product Line:
                                                                                            Altivar 31 and ATV312 drives

                                                                                            Environment:
                                                                                            All 

                                                                                            Cause:
                                                                                            Internal fault 

                                                                                            Resolution:
                                                                                            InF indicates an internal fault.  
                                                                                            It can occur if there are loose connections inside the drive or if the drive is subjected to electromagnetic interference.  Check the line voltage to the drive.
                                                                                            Also, check the voltages on the control terminals, +10 to COM and 24V to COM.  It has been observed that improper wiring of the inputs or external potentiometer can overload the internal power supplies of the drive. This may result in InF fault.
                                                                                            Incorrect connections on the RJ45 ModBus/CANopen port can also cause this.  Verify wiring, particularly to pin 7 (10VDC supply for external keypad).



                                                                                             

                                                                                            ATV31 drive is set up to run with 2 preset speeds and will only run at 10Hz regardless of the programmed value for SP2 (ex. SP2=60Hz).

                                                                                            Issue:   ATV31 drive is set up to run with 2 preset speeds and will only run at 10Hz regardless of the programmed value for SP2 (ex. SP2=60Hz).
                                                                                             
                                                                                            Product Line:   ATV31
                                                                                             
                                                                                            Environment:  All
                                                                                             
                                                                                            Cause:   Preset speeds
                                                                                             
                                                                                            Resolution:   Verify that the logic input used for PS2 is not set to perform another function. For example, when ATV31 drive is configured for 3-wire control, LI4 will be set for JOG. The jog function will have priority.  If jog function is not required, JOG in the FUn menu needs to be set to nO.
                                                                                            The functions of each logic input can be verified in the SUP menu. Go to sub-menu LIA. Scroll to the desired input (LI1A, LI2A. . . ) Enter to see to what the function of the input is assigned. Scroll up and down to see if there are additional functions assigned.

                                                                                             

                                                                                            What is the part number for the Ethernet / Modbus bridge adapter for the ATV31?

                                                                                            Issue:   What is the part number for the Ethernet / Modbus bridge adapter for the ATV31?
                                                                                             
                                                                                            Product Line:   ATV31
                                                                                             
                                                                                            Environment:  All
                                                                                             
                                                                                            Cause:   Ethernet / Modbus bridge
                                                                                             
                                                                                            Resolution:   The part 174CEV30020 is obsolete.
                                                                                            Use TSXETG100


                                                                                             

                                                                                            How is the ATV31 setup for AI3 input to be the primary speed reference?

                                                                                            Issue:   How is the ATV31 setup for AI3 input to be the primary speed reference?
                                                                                             
                                                                                            Product Line:   ATV31
                                                                                             
                                                                                            Environment:  All
                                                                                             
                                                                                            Cause:   Speed reference
                                                                                             
                                                                                            Resolution:   In the CtL menu, set the Fr1 parameter to AI3.

                                                                                             

                                                                                            What is an ATV31****378?

                                                                                            Issue:  
                                                                                            What is an What is an ATV31****378?
                                                                                             
                                                                                            Product Line: 
                                                                                            ATV31
                                                                                             
                                                                                            Environment:
                                                                                            N/A

                                                                                             
                                                                                            Cause:   N/A
                                                                                             
                                                                                            Resolution:   
                                                                                            This is a special drive for Buhler Company. The 378 suffix indicates that logic input LI6 can be used as a 24vdc pulsed speed reference. Would need to obtain a replacement from Buhler Company. May also be identified as S378 suffix.

                                                                                            Want is the part number for the remote mount keypad for the ATV31?

                                                                                            Issue:   Want is the part number for the remote mount keypad for the ATV31?
                                                                                             
                                                                                            Product Line:   ATV31
                                                                                             
                                                                                            Environment:  All
                                                                                             
                                                                                            Cause:   Remote keypad
                                                                                             
                                                                                            Resolution:   VW3A31101. This kit includes a remote keypad, remote mount hardware seal and screws for IP65 mounting on enclosure door and 3 meter cable fitted with 2 connectors.

                                                                                             

                                                                                            What are the specifications for ATV31 drive output relays?

                                                                                            Issue:   What are the specifications for ATV31 drive output relays?
                                                                                             
                                                                                            Product Line:   ATV31
                                                                                             
                                                                                            Environment:  All
                                                                                             
                                                                                            Cause:    Relay specs

                                                                                            Resolution:   There are two relays in the drive.
                                                                                            Relay R1 has three terminals to provide a Normally Open (NO) and a Normally Closed contact from a common.
                                                                                            R1A is a N.O. contact.
                                                                                            R1B is a N.C. contact.
                                                                                            R1C is the common.
                                                                                            R1 is a programmable relay.  When programmed as the factory default, drive fault relay, R1A is closed and R1B is open when the controller is powered and not faulted. Both contacts will change state when the drive faults.

                                                                                            Relay R2 has two terminals to provide a NO contact, R2A & R2C.  This relay is also programmable.

                                                                                            Electrical Characteristics are as follows:
                                                                                            Min. switching capacity: 10 mA for 5 Vdc
                                                                                            Max. switching capacity on a resistive load (power factor = 1 and L/R time constant = 0 ms): 5 A for 250 Vac and 30 Vdc
                                                                                            Max. switching capacity on an inductive load (power factor = 0.4 and L/R time constant = 7 ms): 1.5 A for 250 Vac and 30 Vdc
                                                                                            Sampling time: 8 ms
                                                                                            Service life: 100,000 operations at maximum switching power;
                                                                                                               1,000,000 operations at minimum switching power.

                                                                                             

                                                                                            How is the maximum speed changed in the ATV31 or ATV312 drive so that the motor can operate above 60Hz?

                                                                                            Issue:   
                                                                                            How is the maximum speed changed in the ATV31 or ATV312 drive so that the motor can operate above 60Hz?
                                                                                             
                                                                                            Product Line:   
                                                                                            ATV31 ATV312
                                                                                             
                                                                                            Environment:  
                                                                                            All
                                                                                             
                                                                                            Cause:  
                                                                                            Changing high speed / max frequency
                                                                                             
                                                                                            Resolution:   
                                                                                            Parameter HSP determines the maximum speed the drive can operate.  Parameter tFr determines the maximum value that HSP can be adjusted.  

                                                                                            By default, tFr is set to 60Hz.  When changing the Motor Frequency - bFr this changes tFr to 72Hz.  

                                                                                            To increase the maximum speed above 72Hz - Go to the drc menu and Set parameter tFr.  This can be adjusted up to 500Hz.  After saving the change, go to the SEt menu > HSP and adjust up to the desired speed.  

                                                                                            If your motor is a specialty motor that is rated for a frequency other than 50Hz. or 60Hz. such as a 300Hz. rated spindle motor, change paramter FrS under the DRC menu to match the rated frequency of the motor.

                                                                                             

                                                                                            What is the recommended line reactor part number for a 15HP 460VAC drive?

                                                                                            Issue:
                                                                                            What is the recommended line reactor part number for a 15HP 460VAC drive?

                                                                                            Product Line:
                                                                                            All

                                                                                            Environment:
                                                                                            All

                                                                                            Cause:
                                                                                            Input or output line/load reactor part numbers.

                                                                                            Resolution:
                                                                                            RL02503 is open style.
                                                                                            RL02513 is enclosed NEMA type 1.
                                                                                            Both are 5% reactors rated for 15HP 480V 3 phase.
                                                                                            This reactor will fit the ATV31HD11N4, ATV61HD11N4 and ATV71HD11N4 or any 15HP 460VAC drive.

                                                                                            What is the wire sub assembly kit for the ATV61HC22N4 and ATV71HC16N4 drives?

                                                                                            Issue:
                                                                                            What is the wire sub assembly kit for the ATV61HC22N4 and ATV71HC16N4 drives?

                                                                                            Product Line:
                                                                                            Altivar 61 71

                                                                                            Environment:
                                                                                            Frame size 12

                                                                                            Cause:
                                                                                            Spare parts

                                                                                            Resolution:
                                                                                            The part number is VZ3N1317.

                                                                                            Is PowerSuite compatible with the ATV71 Plus?

                                                                                            Issue:
                                                                                            Compatibility of PowerSuite and ATV71 Plus

                                                                                            Product Line:
                                                                                            ATV71 Plus

                                                                                            Environment:
                                                                                            All models and serial numbers

                                                                                            Cause:
                                                                                            None

                                                                                            Resolution:
                                                                                            In principal yes, but since mid 2012 PowerSuite is replaced by SoMove and therefore not anymore supported.
                                                                                            On drives up to size 15 (ATV61HC63N4 / ATV71HC50N4 / ATV71HC630Y / ATV71HC80Y) there is no
                                                                                            difference between ATV and ATV Plus.

                                                                                            When do the cooling fans on the ATV212 drives come on?

                                                                                            Issue:
                                                                                            When do the cooling fans on the ATV212 drives come on?

                                                                                            Product Line:
                                                                                            Altivar 212

                                                                                            Environment:
                                                                                            All

                                                                                            Cause:
                                                                                            Fan control strategy

                                                                                            Resolution:
                                                                                            The fan starts when the drive is in RUN state.
                                                                                            The fan stops after the STOP command (with a time delay in relation to the thermal state).

                                                                                            What is the part number for the replacement / alternative for 110kW VSD unit - ATV71HC11N4?

                                                                                             The part number for the replacement / alternative for 110kW VSD unit - ATV71HC11N4 is - ATV930C11N4C

                                                                                            For further information , visit link below;-
                                                                                            https://www.schneider-electric.com.au/en/search/ATV930C11N4C
                                                                                            User-added image
                                                                                             

                                                                                            ATV58HC23N4 and ATV58HC28N4 Current Gain board part number?

                                                                                            Issue:
                                                                                            What is the Current Gain Board part number for an ATV58HC23N4 and ATV58HC28N4 ?

                                                                                            Product line: 
                                                                                            ATV58HC23N4  and ATV58HC28N4

                                                                                            Environment: :
                                                                                            ATV58,  All serial numbers

                                                                                            Resolution: 
                                                                                            The part number is  VX5A38C15.  Obsolete no replacement part.

                                                                                            Can an ATV212 drive's programming be saved to the HMI keypad (VW3A1101) and transferred to another ATV212?

                                                                                            Issue:
                                                                                            Needs the ATV212 drive's programming be saved to the HMI keypad (VW3A1101) and transferred to another ATV212?

                                                                                            Product Line:
                                                                                            Altivar 212

                                                                                            Environment:
                                                                                            All

                                                                                            Cause:
                                                                                            N/A

                                                                                            Resolution:
                                                                                            No, the ATV212's programming cannot be saved to any of the keypads available.  

                                                                                            Programming can be saved by any of three methods:
                                                                                            - in the drive by setting parameter tYP = 7
                                                                                            - in the Multiloader tool
                                                                                            - by using SoMove software, downloading the ATV212 DTM File, and using the TCSMCNAM3M002P - SoMove cable

                                                                                            What are the dimensions and weight for the ATV31HU11M2, ATV31HU15M2, ATV31HU22M3X, ATV31H037N4, ATV31H055N4, ATV31H075N4, ATV31HU11N4, ATV31HU15N4, ATV31H075S6X or ATV31HU15S6X?

                                                                                            Issue:   What are the dimensions and weight for the ATV31HU11M2, ATV31HU15M2, ATV31HU22M3X, ATV31H037N4, ATV31H055N4, ATV31H075N4, ATV31HU11N4, ATV31HU15N4, ATV31H075S6X or ATV31HU15S6X?
                                                                                             
                                                                                            Product Line:   ATV31
                                                                                             
                                                                                            Environment:  ATV31HU11M2, ATV31HU15M2, ATV31HU22M3X, ATV31H037N4, ATV31H055N4, ATV31H075N4, ATV31HU11N4, ATV31HU15N4, ATV31H075S6X or ATV31HU15S6X
                                                                                             
                                                                                            Cause:   
                                                                                             
                                                                                            Resolution:   This is the size 6 and the dimensions are:
                                                                                            Width = 4.13 inches 105 mm
                                                                                            Height = 5.63 inches 143 mm
                                                                                            Depth = 5.91 inches 150mm
                                                                                            The weight is 2.92 lbs (1.35 kg)


                                                                                             

                                                                                            Do we have CAD drawings for the ATV312 drives?

                                                                                            Issue:
                                                                                            Do we have CAD drawings for the ATV312 drives?

                                                                                            Product Line:
                                                                                            Altivar ATV312 and ATV31

                                                                                            Environment:
                                                                                            All

                                                                                            Cause:
                                                                                            Cad drawings

                                                                                            Resolution:
                                                                                            Use the following link to the CAD Drawings Catalog.

                                                                                            https://www.schneider-electric.us/sites/us/en/support/product-support-resources/3d-cad.page


                                                                                            CTA-ID : 2061638

                                                                                            Is it possible to field install the DC choke on the D version of the ATV61HD90N4D drives?

                                                                                            Issue: 
                                                                                            Is it possible to field install the DC choke on the D version of the ATV61HD90N4D drives?

                                                                                            Product Line:
                                                                                            Altivar 61, ATV61

                                                                                            Environment:
                                                                                            ATV61HD90N4D

                                                                                            Cause:
                                                                                            The AV61HD90N4D was ordered which ships without the DC choke.

                                                                                            Resolution:
                                                                                            The DC choke for this part is not available for sale. Recommended solution is to add a 5% input line reactor, separately mounted.

                                                                                            Needs a Power board for ATV71HC11N4

                                                                                            Issue:
                                                                                            What is the part number for the ATV71HC11N4 and ATV61HC13N4 power boards?

                                                                                            Product line:
                                                                                            ATV71 and ATV61

                                                                                            Environment:
                                                                                            All models, all serial numbers

                                                                                            Cause:
                                                                                            Power board not functional

                                                                                            Resolution:
                                                                                            The Power board for these drive is VX5A1HC1113.

                                                                                            What is the power board part number for the ATV61HD22N4 and ATV71HD22N4?

                                                                                            Issue:
                                                                                            What is the powerboard part number for the ATV61HD22N4 and ATV71HD22N4?

                                                                                            Product Line:
                                                                                            ATV61HD22N4 and ATV71HD22N4

                                                                                            Environment:
                                                                                            All serial numbers for ATV61HD22N4 and ATV71HD22N4

                                                                                            Cause:
                                                                                            Part number required to order part

                                                                                            Resolution:
                                                                                            VX5A1HD22N4

                                                                                            What is the part number for the DC choke for the ATV71HC11N4 drive?

                                                                                            Issue:  What is the part number for the DC choke for the ATV71HC11N4 drive?
                                                                                            Product line:  Altivar ATV71

                                                                                            Environment:  All models, all serial numbers 
                                                                                            Cause:  Replacement parts   
                                                                                            Resolution: VW3A4523, the part must be ordered by Schneider Services

                                                                                            What is alternative for Schneider part number ATV71HD37N4?

                                                                                            Part number ATV71HD37N4 is no longer available and is replaced with ATV930D37N4.
                                                                                             

                                                                                            What is ATV71 fan control board part number and troubleshooting LEDs.

                                                                                            Issue:
                                                                                            ATV71 Fan control board part number and troubleshooting LEDs.

                                                                                            Product Line:
                                                                                            Alitvar ATV71 High HP

                                                                                            Environment:
                                                                                            All

                                                                                            Cause:
                                                                                            There are two troubleshooting LEDs on the fan control board.

                                                                                            Resolution:
                                                                                            See the attached file to see the LED troubleshooting codes.

                                                                                            Please note that the following drives have the fan control board.

                                                                                            Frame size 10 is ATV71HC11N4 and ATV71HD75M3X
                                                                                            Frame size 11 and 12 are ATV71HC13 thru HC16N4
                                                                                            Frame size 13 and 14 are ATV71HC20N4 thru HC40N4
                                                                                            Frame size 15 is ATV71HC50N4

                                                                                             
                                                                                            Frame size 10,11 and 12
                                                                                            1 Fan control board (VX5A1400)
                                                                                            1 Heat sink fan (VZ3V1212)

                                                                                            Fame size 13
                                                                                            1 Fan control board (VX5A1400)
                                                                                            2 Heat sink fans (VZ3V1212)

                                                                                            Frame size 14
                                                                                            2 Fan control boards (VX5A1400)
                                                                                            3 Heat sink fans (VZ3V1212)

                                                                                            Frame size 15
                                                                                            2 Fan control boards (VX5A1400)
                                                                                            4 Heat sink fans (VZ3V1212)
                                                                                            Show More