Quantcast

Altivar 71 Variable Speed Drive, 110kW, 150HP, 480V, EMC Filter-Graphic Terminal

Altivar 71 Variable Speed Drive, 110kW, 150HP, 480V, EMC Filter-Graphic Terminal

Altivar 71 Variable Speed Drive, 110kW, 150HP, 480V, EMC Filter-Graphic Terminal

Item Number: ATV71HC11N4

Product Dimensions

Width icon

Width360 mm

Height icon

Height1022 mm

Depth icon

Depth377 mm

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Product destination

  • asynchronous motors
  • synchronous motors

Sustainable offer status

Green Premium product

Warranty

18 months

Range of product

Altivar 71

Product or component type

variable speed drive

Physical

Local signalling

1 LED (red) for drive voltage

Type of cable

  • with a NEMA Type1 kit: 3 wire(s)UL 508 cable at 40 °C, copper 75 °C / PVC
  • with an IP21 or an IP31 kit: 3 wire(s)IEC cable at 40 °C, copper 70 °C / PVC
  • without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 70 °C / PVC
  • without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 90 °C / XLPE/EPR

Supply

  • internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 ma,="" protection="" type:="" overload="" and="" short-circuit="">
  • internal supply: 24 V DC (21-27 V), <200 ma,="" protection="" type:="" overload="" and="" short-circuit="">

Protection type

  • against exceeding limit speed: drive
  • short-circuit between motor phases: drive
  • thermal protection: drive
  • motor phase break: motor
  • power removal: motor
  • thermal protection: motor
  • against input phase loss: drive
  • break on the control circuit: drive
  • input phase breaks: drive
  • line supply overvoltage: drive
  • line supply undervoltage: drive
  • overcurrent between output phases and earth: drive
  • overheating protection: drive
  • overvoltages on the DC bus: drive

Insulation resistance

> 1 mOhm 500 V DC for 1 minute to earth

Communication port protocol

  • CANopen
  • Modbus

Connector type

  • 1 RJ45 (on front face) for Modbus
  • 1 RJ45 (on terminal) for Modbus
  • male SUB-D 9 on RJ45 for CANopen

Marking

CE

Height

1022 mm

Depth

377 mm

Width

360 mm

Net weight

106 kg

Standards

  • EN/IEC 61800-5-1
  • EN 61800-3 environments 1 category C3
  • IEC 60721-3-3 class 3C2
  • EN/IEC 61800-3
  • EN 55011 class A group 2
  • EN 61800-3 environments 2 category C3
  • UL Type 1

Product certifications

  • NOM 117
  • CSA
  • UL
  • C-Tick
  • GOST

IP degree of protection

IP20

Relative humidity

  • 5...95 % without condensation conforming to IEC 60068...2-3
  • 5...95 % without dripping water conforming to IEC 60068...2-3

Ambient air temperature for operation

-10...50 °C (without derating)

Ambient air temperature for storage

-25...70 °C

EU RoHS Directive

Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free

Yes

RoHS exemption information

Yes

China RoHS Regulation

X

Environmental Disclosure

ENVPEP091205EN

California proposition 65

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Others

Supply voltage limits

323...528 V

Supply frequency

50...60 Hz - 5...5 %

Network frequency

47.5...63 Hz

Speed range

  • 1...100 for asynchronous motor in open-loop mode, without speed feedback
  • 1...1000 for asynchronous motor in closed-loop mode with encoder feedback
  • 1...50 for synchronous motor in open-loop mode, without speed feedback

Speed accuracy

  • +/- 0.01 % of nominal speed in closed-loop mode with encoder feedback 0.2 Tn to Tn
  • +/- 10 % of nominal slip without speed feedback 0.2 Tn to Tn

Torque accuracy

  • +/- 15 % in open-loop mode, without speed feedback
  • +/- 5 % in closed-loop mode with encoder feedback

Transient overtorque

  • 170 % of nominal motor torque +/- 10 % for 60 s every 10 minutes
  • 220 % of nominal motor torque +/- 10 % for 2 s

Braking torque

  • <= 150="" %="" with="" braking="" or="" hoist="">
  • 30 % without braking resistor

Synchronous motor control profile

vector control without speed feedback

Regulation loop

adjustable PI regulator

Motor slip compensation

  • adjustable
  • not available in voltage/frequency ratio (2 or 5 points)
  • automatic whatever the load
  • suppressable

Output voltage

<= power="" supply="">

Insulation

electrical between power and control

Electrical connection

  • terminal, clamping capacity: 2.5 mm², AWG 14 (AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR)
  • terminal, clamping capacity: 2 x 100 mm² (L1/R, L2/S, L3/T, U/T1, V/T2, W/T3)
  • terminal, clamping capacity: 60 mm² (PA, PB)
  • terminal, clamping capacity: 2 x 150 mm² (PC/-, PO, PA/+)

Tightening torque

  • 0.6 N.m (AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR)
  • 24 N.m, 212 lb.in (L1/R, L2/S, L3/T, U/T1, V/T2, W/T3)
  • 12 N.m, 106 lb.in (PA, PB)
  • 41 N.m, 360 lb.in (PC/-, PO, PA/+)

Analogue input number

2

Analogue input type

  • AI1-/Al1+ bipolar differential voltage: +/- 10 V DC 24 V max, resolution 11 bits + sign
  • AI2 software-configurable current: 0...20 mA, impedance: 242 Ohm, resolution 11 bits
  • AI2 software-configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, resolution 11 bits

Sampling duration

  • 2 ms +/- 0.5 ms (AI1-/Al1+) - analog input(s)
  • 2 ms +/- 0.5 ms (Al2) - analog input(s)
  • 2 ms +/- 0.5 ms (LI1...LI5) - discrete input(s)
  • 2 ms +/- 0.5 ms (LI6)if configured as logic input - discrete input(s)

Response time

  • <= 100="" ms="" in="" sto="" (safe="" torque="">
  • AO1 2 ms, tolerance +/- 0.5 ms for analog output(s)
  • R1A, R1B, R1C 7 ms, tolerance +/- 0.5 ms for discrete output(s)
  • R2A, R2B 7 ms, tolerance +/- 0.5 ms for discrete output(s)

Accuracy

  • +/- 0.6 % (AI1-/Al1+) for a temperature variation 60 °C
  • +/- 0.6 % (AI2) for a temperature variation 60 °C
  • +/- 1 % (AO1) for a temperature variation 60 °C

Linearity error

  • +/- 0.15 % of maximum value (AI1-/Al1+, AI2)
  • +/- 0.2 % (AO1)

Analogue output number

1

Analogue output type

  • AO1 software-configurable logic output 10 V 20-20 mA
  • AO1 software-configurable current 0...20 mA, impedance: 500 Ohm, resolution 10 bits
  • AO1 software-configurable voltage 0...10 V DC, impedance: 470 Ohm, resolution 10 bits

Discrete output number

2

Discrete output type

  • configurable relay logic: (R1A, R1B, R1C) NO/NC - 100000 cycles
  • configurable relay logic: (R2A, R2B) NO - 100000 cycles

Minimum switching current

3 mA at 24 V DC for configurable relay logic

Maximum switching current

  • R1, R2: 2 A at 250 V AC inductive load, cos phi = 0.4
  • R1, R2: 2 A at 30 V DC inductive load, cos phi = 0.4
  • R1, R2: 5 A at 250 V AC resistive load, cos phi = 1
  • R1, R2: 5 A at 30 V DC resistive load, cos phi = 1

Discrete input number

7

Discrete input type

  • LI1...LI5: programmable 24 V DC with level 1 PLC, impedance: 3500 Ohm
  • LI6: switch-configurable 24 V DC with level 1 PLC, impedance: 3500 Ohm
  • LI6: switch-configurable PTC probe 0-6 , impedance: 1500 Ohm
  • PWR: safety input 24 V DC, impedance: 1500 Ohm conforming to ISO 13849-1 level d

Discrete input logic

  • negative logic (sink) (LI1...LI5), > 16 V (state 0), < 10="" v="" (state="">
  • positive logic (source) (LI1...LI5), < 5="" v="" (state="" 0),=""> 11 V (state 1)
  • negative logic (sink) (LI6)if configured as logic input, > 16 V (state 0), < 10="" v="" (state="">
  • positive logic (source) (LI6)if configured as logic input, < 5="" v="" (state="" 0),=""> 11 V (state 1)

Acceleration and deceleration ramps

  • linear adjustable separately from 0.01 to 9000 s
  • automatic adaptation of ramp if braking capacity exceeded, by using resistor
  • S, U or customized

Braking to standstill

by DC injection

Frequency resolution

  • analog input: 0.024/50 Hz
  • display unit: 0.1 Hz

Physical interface

2-wire RS 485 for Modbus

Transmission frame

RTU for Modbus

Transmission rate

  • 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps for Modbus on terminal
  • 9600 bps, 19200 bps for Modbus on front face
  • 20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps for CANopen

Data format

  • 8 bits, 1 stop, even parity for Modbus on front face
  • 8 bits, odd even or no configurable parity for Modbus on terminal

Number of addresses

  • 1...127 for CANopen
  • 1...247 for Modbus

Method of access

slave CANopen

Operating position

vertical +/- 10 degree

Functionality

full

Specific application

other applications

Option card

  • communication card for CC-Link
  • communication card for Modbus TCP
  • communication card for Modbus/Uni-Telway
  • overhead crane card
  • communication card for Profibus DP
  • communication card for Profibus DP V1
  • controller inside programmable card
  • communication card for DeviceNet
  • communication card for EtherNet/IP
  • communication card for Fipio
  • I/O extension card
  • communication card for Interbus-S
  • interface card for encoder
  • communication card for Modbus Plus

Noise level

69.5 dB conforming to 86/188/EEC

Dielectric strength

  • 3535 V DC between earth and power terminals
  • 5092 V DC between control and power terminals

Electromagnetic compatibility

  • 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
  • conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
  • electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
  • electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
  • radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
  • voltage dips and interruptions immunity test conforming to IEC 61000-4-11

Pollution degree

  • 2 conforming to EN/IEC 61800-5-1
  • 3 conforming to UL 840

Vibration resistance

  • 0.6 gn (f= 10-200 Hz) conforming to EN/IEC 60068-2-6
  • 1.5 mm peak to peak (f= 3-10 Hz) conforming to EN/IEC 60068-2-6

Shock resistance

7 gn for 11 ms conforming to EN/IEC 60068-2-27

Operating altitude

  • <= 1000="" m="" without="">
  • 1000...3000 m with current derating 1 % per 100 m

Unit Type of Package 1

PCE

Number of Units in Package 1

1

Package 1 Weight

92.0 kg

Package 1 Height

41 cm

Package 1 width

43 cm

Package 1 Length

122.5 cm

WEEE

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

Product specific application

complex, high-power machines

Component name

ATV71

Motor power kW

110 kW, 3 phases at 380...480 V

Motor power hp

150 hp, 3 phases at 380...480 V

Maximum motor cable length

  • 100 m shielded cable
  • 200 m unshielded cable

[Us] rated supply voltage

380...480 V - 15...10 %

Network number of phases

3 phases

Line current

  • 163 A for 480 V 3 phases 110 kW / 150 hp
  • 202 A for 380 V 3 phases 110 kW / 150 hp

EMC filter

integrated

Assembly style

with heat sink

Variant

reinforced version

Apparent power

133 kVA at 380 V 3 phases 110 kW / 150 hp

Prospective line Isc

35 kA for 3 phases

Nominal output current

  • 215 A at 2.5 kHz 380 V 3 phases 110 kW / 150 hp
  • 215 A at 2.5 kHz 460 V 3 phases 110 kW / 150 hp

Maximum transient current

  • 323 A for 60 s 3 phases 110 kW / 150 hp
  • 355 A for 2 s 3 phases 110 kW / 150 hp

Output frequency

0.1...500 Hz

Nominal switching frequency

2.5 kHz

Switching frequency

  • 2.5...8 kHz adjustable
  • 2.5...8 kHz with derating factor

Asynchronous motor control profile

  • voltage/frequency ratio (2 or 5 points)
  • ENA (Energy adaptation) system for unbalanced loads
  • sensorless flux vector control (SFVC) (voltage or current vector)
  • flux vector control (FVC) with sensor (current vector)

Type of polarization

no impedance for Modbus
Show all specifications

Documents & downloads

hide show
Filter items
  • All

  • Product Brochures

  • CAD Files and Packs

  • Technical Data Catalogues

  • Installation Instruction

  • Product Environmental

  • End of Life Manual

  • Handout

  • Operating Manuals

  • Technical Drawing

  • eTechPub

  • Marine Certificate

  • Certificates (MSDS)

  • Software - Release

  • DTM Files

Frequently Asked Questions

hide show

What is the spare part manual for the ATV61HD90M3X, ATV61HC13N4, ATV71HD75M3X and ATV71HC11N4?

Issue:
Needs the manual of spare parts for the ATV61HD90M3X, ATV61HC13N4, ATV71HD75M3X and ATV71HC11N4.

Product line:  
ATV61HD90M3X, ATV61HC13N4, ATV71HD75M3X, ATV71HC11N4

Environment:  
Frame size 10: ATV61HD90M3X, ATV61HC13N4, ATV71HD75M3X, ATV71HC11N4

Cause:
None

Resolution:
Instruction bulletin 30072-452-77
See attachment

What is ATV71 fan control board part number and troubleshooting LEDs?

Issue:
ATV71 Fan control board part number and troubleshooting LEDs.

Product Line:
Alitvar ATV71 High HP

Environment:
All

Cause:
There are two troubleshooting LEDs on the fan control board.

Resolution:
See the attached file to see the LED troubleshooting codes.

Please note that the following drives have the fan control board.

Frame size 10 is ATV71HC11N4 and ATV71HD75M3X
Frame size 11 and 12 are ATV71HC13 thru HC16N4
Frame size 13 and 14 are ATV71HC20N4 thru HC40N4
Frame size 15 is ATV71HC50N4

 
Frame size 10,11 and 12
1 Fan control board (VX5A1400)
1 Heat sink fan (VZ3V1212)

Fame size 13
1 Fan control board (VX5A1400)
2 Heat sink fans (VZ3V1212)

Frame size 14
2 Fan control boards (VX5A1400)
3 Heat sink fans (VZ3V1212)

Frame size 15
2 Fan control boards (VX5A1400)
4 Heat sink fans (VZ3V1212)

What is the part number for the ATV71HC11N4 and ATV61HC13N4 power boards?

Issue:
Needs a Power board for ATV71HC11N4 

Product line:
ATV71 and ATV61

Environment:
All models, all serial numbers

Cause:
Power board not functional

Resolution:
The Power board for these drive is VX5A1HC1113.

It is required to check the Serial number of the drive before ordering the Power Board.
If the 8th digit in the serial number is 2, the drive was built using Fuji IGBT's instead of the standard Mitsubishi IGBT's.   A drive with Fuji IGBT's requires a modified version of the Power board (VX5A1HC1113F).   IGBT, and gate driver board parts also will have an F at the end.

Are Schneider Electric Altivar drives 6, 9, 12, 18 or 24-pulse?

Issue:
Are SE Altivar drives 6, 9, 12, 18 or 24-pulse?     

Product line: 
Altivar 61 71 12 312 212 320 32 630 650 930 950

Environment: 
All models, all serial numbers  

Cause:
None

Resolution:
Schneider Electric Altivar VFDs are 6-pulse.  The enclosed Power Guard is 18-pulse.

Where can I find information on dynamic braking resistors to use with the ATV32, ATV312 and ATV71 drives only?

Issue:
Dynamic braking resistors to use with the Altivar drives.

Product Line:
ATV32, ATV312 and ATV71 Drives

Environment:
All

Cause:
Needs to know if the drives come with a DB resistor?

Resolution:
The braking resistor is not included on the ATV32, ATV312 and ATV71 Drives, and if needed must be purchased separately.
In the US, we have partnered with a resistor company named Powerohm to provide a full range of options.
See attached document for information on sizing and selecting DB resistors from Powerohm.
Note that any technical questions related to the resistors themselves should be directed to Powerohm and the document includes their contact information.

What can cause the ATV58 drives display to fade out?

Issue:
Is there a remedy for a fading display on ATV58?

Product Line:
Altivar ATV58

Environment:
This has been found in keypads manufactured between the 6th week and 15th week of 2003.
Date codes on the back of the keypad are 0306 to 0315. The four digit date code is typically preceded by a letter such as G0149.

Cause:
Premature degradation of the display

Resolution:
For affected units, need to replace the keypad or possibly replace the entire drive, becaue the ATV58 drives are obsoleted.