Quantcast

Altivar 312 Variable Speed Drive, 7.5kW, 18kVA, 269W, 380..500V, 3 Phase Supply

Altivar 312 Variable Speed Drive, 7.5kW, 18kVA, 269W, 380..500V, 3 Phase Supply

Altivar 312 Variable Speed Drive, 7.5kW, 18kVA, 269W, 380..500V, 3 Phase Supply

Item Number: ATV312HU75N4

Datasheet

Product Dimensions

Width icon

Width180 mm

Height icon

Height232 mm

Depth icon

Depth172 mm

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Range of product

Altivar 312

Product or component type

variable speed drive

Product destination

asynchronous motors

Sustainable offer status

Green Premium product

Warranty

18 months

Physical

Supply

  • internal supply for logic inputs: 19...30 V 100 mA, protection type: overload and short-circuit protection
  • internal supply for reference potentiometer (2.2 to 10 kOhm): 10...10.8 V 10 mA, protection type: overload and short-circuit protection

Communication port protocol

  • CANopen
  • Modbus

IP degree of protection

  • IP20 on upper part without cover plate
  • IP21 on connection terminals
  • IP31 on upper part
  • IP41 on upper part

Protection type

  • input phase breaks: drive
  • line supply overvoltage and undervoltage safety circuits: drive
  • line supply phase loss safety function, for three phases supply: drive
  • motor phase breaks: drive
  • overcurrent between output phases and earth (on power up only): drive
  • overheating protection: drive
  • short-circuit between motor phases: drive
  • thermal protection: motor

Insulation resistance

>= 500 mOhm 500 V DC for 1 minute

Local signalling

  • 1 LED (red) for drive voltage
  • four 7-segment display units for CANopen bus status

Connector type

1 RJ45 for Modbus/CANopen

Marking

CE

Height

232 mm

Width

180 mm

Depth

172 mm

Net weight

6.5 kg

Standards

  • IEC 61800-3
  • IEC 61800-5-1

Product certifications

  • CSA
  • DNV
  • NOM
  • GOST
  • C-Tick
  • UL

Relative humidity

  • 5...95 % without condensation conforming to IEC 60068...2-3
  • 5...95 % without dripping water conforming to IEC 60068...2-3

Ambient air temperature for storage

-25...70 °C

Ambient air temperature for operation

  • -10...50 °C without derating (with protective cover on top of the drive)
  • -10...60 °C with derating factor (without protective cover on top of the drive)

EU RoHS Directive

Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free

Yes

RoHS exemption information

Yes

China RoHS Regulation

X

Environmental Disclosure

ENVPEP110706EN

Circularity Profile

ENVEOLI100203EN

California proposition 65

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Others

Product specific application

simple machine

Assembly style

with heat sink

Component name

ATV312

Motor power kW

7.5 kW

Motor power hp

10 hp

[Us] rated supply voltage

380...500 V - 15...10 %

Supply frequency

50...60 Hz - 5...5 %

Network number of phases

3 phases

Line current

  • 27.7 A at 380 V, Isc = 22 kA
  • 21 A at 500 V

EMC filter

integrated

Apparent power

18 kVA

Maximum transient current

25.5 A for 60 s

Power dissipation in W

269 W at nominal load

Speed range

1...50

Asynchronous motor control profile

  • sensorless flux vector control with PWM type motor control signal
  • factory set : constant torque

Electrical connection

  • Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6 terminal 2.5-2.5 mm² AWG 14
  • L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- terminal 16-16 mm² AWG 6

Option card

  • communication card for CANopen daisy chain
  • communication card for DeviceNet
  • communication card for Fipio
  • communication card for Modbus TCP
  • communication card for Profibus DP

Supply voltage limits

323...550 V

Prospective line Isc

22 kA

Continuous output current

17 A at 4 kHz

Output frequency

0...500 Hz

Nominal switching frequency

4 kHz

Switching frequency

2...16 kHz adjustable

Transient overtorque

170...200 % of nominal motor torque

Braking torque

  • 150 % during 60 s with braking resistor
  • 100 % with braking resistor continuously
  • 150 % without braking resistor

Regulation loop

frequency PI regulator

Motor slip compensation

  • automatic whatever the load
  • suppressable
  • adjustable

Output voltage

<= power="" supply="">

Tightening torque

  • Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6: 0.6...0.6 N.m
  • L1, L2, L3, U, V, W, PA, PB, PA/+, PC/-: 2.5...2.5 N.m

Insulation

electrical between power and control

Analogue input number

3

Analogue input type

  • AI1 configurable voltage 0...10 V, input voltage 30 V max, impedance: 30000 Ohm
  • AI2 configurable voltage +/- 10 V, input voltage 30 V max, impedance: 30000 Ohm
  • AI3 configurable current 0...20 mA, impedance: 250 Ohm

Sampling duration

  • AI1, AI2, AI3: 8 ms analog
  • LI1...LI6: 4 ms discrete

Response time

  • AOV, AOC 8 ms for analog
  • R1A, R1B, R1C, R2A, R2B 8 ms for discrete

Linearity error

+/- 0.2 % for output

Analogue output number

1

Analogue output type

  • AOC configurable current: 0...20 mA, impedance: 800 Ohm, resolution: 8 bits
  • AOV configurable voltage: 0...10 V, impedance: 470 Ohm, resolution: 8 bits

Discrete input logic

  • logic input not wired (LI1...LI4), < 13="" v="" (state="">
  • negative logic (source) (LI1...LI6), > 19 V (state 0)
  • positive logic (source) (LI1...LI6), < 5="" v="" (state="" 0),=""> 11 V (state 1)

Discrete output number

2

Discrete output type

  • configurable relay logic: (R1A, R1B, R1C) 1 NO + 1 NC - 100000 cycles
  • configurable relay logic: (R2A, R2B) NC - 100000 cycles

Minimum switching current

R1-R2 10 mA at 5 V DC

Maximum switching current

  • R1-R2: 2 A at 250 V AC inductive load, cos phi = 0.4 and L/R = 7 ms
  • R1-R2: 2 A at 30 V DC inductive load, cos phi = 0.4 and L/R = 7 ms
  • R1-R2: 5 A at 250 V AC resistive load, cos phi = 1 and L/R = 0 ms
  • R1-R2: 5 A at 30 V DC resistive load, cos phi = 1 and L/R = 0 ms

Discrete input number

6

Discrete input type

(LI1...LI6) programmable at 24 V, 0-100 mA for PLC, impedance: 3500 Ohm

Acceleration and deceleration ramps

  • S, U or customized
  • linear adjustable separately from 0.1 to 999.9 s

Braking to standstill

by DC injection

Time constant

5 ms for reference change

Frequency resolution

  • analog input: 0.1...100 Hz
  • display unit: 0.1 Hz

Physical interface

RS485 multidrop serial link

Transmission frame

RTU

Transmission rate

  • 10, 20, 50, 125, 250, 500 kbps or 1 Mbps for CANopen
  • 4800, 9600 or 19200 bps for Modbus

Number of addresses

  • 1...127 for CANopen
  • 1...247 for Modbus

Number of drive

  • 127 for CANopen
  • 31 for Modbus

Operating position

vertical +/- 10 degree

Outer dimension

  • 232 x 180 x 170 mm
  • 405 x 234 x 268 mm
  • 300 x 210 x 170 mm

Network frequency

47.5...63 Hz

Dielectric strength

  • 2410 V DC between earth and power terminals
  • 3400 V AC between control and power terminals

Electromagnetic compatibility

  • 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
  • electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
  • electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
  • radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3

Pollution degree

2

Protective treatment

TC

Vibration resistance

  • 1 gn (f= 13-150 Hz) conforming to EN/IEC 60068-2-6
  • 1.5 mm (f= 3-13 Hz) conforming to EN/IEC 60068-2-6

Shock resistance

15 gn for 11 ms conforming to EN/IEC 60068-2-27

Operating altitude

  • <= 1000="" m="" without="">
  • 1000...3000 m with current derating 1 % per 100 m

Unit Type of Package 1

PCE

Number of Units in Package 1

1

Package 1 Weight

6.1 kg

Package 1 Height

22.788 cm

Package 1 width

23.237 cm

Package 1 Length

29.832 cm

Unit Type of Package 2

PAL

Number of Units in Package 2

18

Package 2 Weight

117.0 kg

Package 2 Height

77.0 cm

Package 2 width

60.0 cm

Package 2 Length

80.0 cm

Unit Type of Package 3

S04

Number of Units in Package 3

2

Package 3 Weight

13.37 kg

Package 3 Height

30.0 cm

Package 3 width

40.0 cm

Package 3 Length

60.0 cm

WEEE

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
Show all specifications

Documents & downloads

hide show
Filter items
  • All

  • CAD Files and Packs

  • Technical Data Catalogues

  • End of Life Manual

  • Installation Instruction

  • Product Environmental

  • Operating Manuals

  • Marine Certificate

  • Certificates (MSDS)

  • Software - Release