Quantcast

Altivar 312 Variable Speed Drive, 15kW, 32kVA, 492 W, 380..500V, 3 Phase Supply

Altivar 312 Variable Speed Drive, 15kW, 32kVA, 492 W, 380..500V, 3 Phase Supply

Altivar 312 Variable Speed Drive, 15kW, 32kVA, 492 W, 380..500V, 3 Phase Supply

Item Number: ATV312HD15N4

Datasheet

Product Dimensions

Width icon

Width245 mm

Height icon

Height329.5 mm

Depth icon

Depth192 mm

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Range of product

Altivar 312

Product or component type

variable speed drive

Product destination

asynchronous motors

Sustainable offer status

Green Premium product

Warranty

18 months

Physical

Supply

  • internal supply for logic inputs: 19...30 V 100 mA, protection type: overload and short-circuit protection
  • internal supply for reference potentiometer (2.2 to 10 kOhm): 10...10.8 V 10 mA, protection type: overload and short-circuit protection

Communication port protocol

  • Modbus
  • CANopen

IP degree of protection

  • IP20 on upper part without cover plate
  • IP21 on connection terminals
  • IP31 on upper part
  • IP41 on upper part

Protection type

  • input phase breaks: drive
  • line supply overvoltage and undervoltage safety circuits: drive
  • line supply phase loss safety function, for three phases supply: drive
  • motor phase breaks: drive
  • overcurrent between output phases and earth (on power up only): drive
  • overheating protection: drive
  • short-circuit between motor phases: drive
  • thermal protection: motor

Insulation resistance

>= 500 mOhm 500 V DC for 1 minute

Local signalling

  • 1 LED (red) for drive voltage
  • four 7-segment display units for CANopen bus status

Connector type

1 RJ45 for Modbus/CANopen

Marking

CE

Height

329.5 mm

Width

245 mm

Depth

192 mm

Net weight

11 kg

Standards

  • IEC 61800-5-1
  • IEC 61800-3

Product certifications

  • UL
  • CSA
  • DNV
  • GOST
  • C-Tick
  • NOM

Relative humidity

  • 5...95 % without condensation conforming to IEC 60068...2-3
  • 5...95 % without dripping water conforming to IEC 60068...2-3

Ambient air temperature for storage

-25...70 °C

Ambient air temperature for operation

  • -10...50 °C without derating (with protective cover on top of the drive)
  • -10...60 °C with derating factor (without protective cover on top of the drive)

EU RoHS Directive

Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free

Yes

RoHS exemption information

Yes

China RoHS Regulation

X

Environmental Disclosure

ENVPEP110706EN

Circularity Profile

ENVEOLI100203EN

California proposition 65

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Others

Package 1 Bare Product Quantity

1

Product specific application

simple machine

Assembly style

with heat sink

Component name

ATV312

Motor power kW

15 kW

Motor power hp

20 hp

[Us] rated supply voltage

380...500 V - 15...10 %

Supply frequency

50...60 Hz - 5...5 %

Network number of phases

3 phases

Line current

  • 48.2 A at 380 V, Isc = 22 kA
  • 36.8 A at 500 V

EMC filter

integrated

Apparent power

32 kVA

Maximum transient current

49.5 A for 60 s

Power dissipation in W

492 W at nominal load

Speed range

1...50

Asynchronous motor control profile

  • sensorless flux vector control with PWM type motor control signal
  • factory set : constant torque

Electrical connection

  • Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6 terminal 2.5-2.5 mm² AWG 14
  • L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- terminal 25-25 mm² AWG 3

Option card

  • communication card for CANopen daisy chain
  • communication card for DeviceNet
  • communication card for Fipio
  • communication card for Modbus TCP
  • communication card for Profibus DP

Supply voltage limits

323...550 V

Prospective line Isc

22 kA

Continuous output current

33 A at 4 kHz

Output frequency

0...500 Hz

Nominal switching frequency

4 kHz

Switching frequency

2...16 kHz adjustable

Transient overtorque

170...200 % of nominal motor torque

Braking torque

  • 150 % during 60 s with braking resistor
  • 100 % with braking resistor continuously
  • 150 % without braking resistor

Regulation loop

frequency PI regulator

Motor slip compensation

  • adjustable
  • automatic whatever the load
  • suppressable

Output voltage

<= power="" supply="">

Tightening torque

  • Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6: 0.6...0.6 N.m
  • L1, L2, L3, U, V, W, PA, PB, PA/+, PC/-: 4.5...4.5 N.m

Insulation

electrical between power and control

Analogue input number

3

Analogue input type

  • AI1 configurable voltage 0...10 V, input voltage 30 V max, impedance: 30000 Ohm
  • AI2 configurable voltage +/- 10 V, input voltage 30 V max, impedance: 30000 Ohm
  • AI3 configurable current 0...20 mA, impedance: 250 Ohm

Sampling duration

  • AI1, AI2, AI3: 8 ms analog
  • LI1...LI6: 4 ms discrete

Response time

  • AOV, AOC 8 ms for analog
  • R1A, R1B, R1C, R2A, R2B 8 ms for discrete

Linearity error

+/- 0.2 % for output

Analogue output number

1

Analogue output type

  • AOC configurable current: 0...20 mA, impedance: 800 Ohm, resolution: 8 bits
  • AOV configurable voltage: 0...10 V, impedance: 470 Ohm, resolution: 8 bits

Discrete input logic

  • logic input not wired (LI1...LI4), < 13="" v="" (state="">
  • negative logic (source) (LI1...LI6), > 19 V (state 0)
  • positive logic (source) (LI1...LI6), < 5="" v="" (state="" 0),=""> 11 V (state 1)

Discrete output number

2

Discrete output type

  • configurable relay logic: (R1A, R1B, R1C) 1 NO + 1 NC - 100000 cycles
  • configurable relay logic: (R2A, R2B) NC - 100000 cycles

Minimum switching current

R1-R2 10 mA at 5 V DC

Maximum switching current

  • R1-R2: 2 A at 250 V AC inductive load, cos phi = 0.4 and L/R = 7 ms
  • R1-R2: 2 A at 30 V DC inductive load, cos phi = 0.4 and L/R = 7 ms
  • R1-R2: 5 A at 250 V AC resistive load, cos phi = 1 and L/R = 0 ms
  • R1-R2: 5 A at 30 V DC resistive load, cos phi = 1 and L/R = 0 ms

Discrete input number

6

Discrete input type

(LI1...LI6) programmable at 24 V, 0-100 mA for PLC, impedance: 3500 Ohm

Acceleration and deceleration ramps

  • S, U or customized
  • linear adjustable separately from 0.1 to 999.9 s

Braking to standstill

by DC injection

Time constant

5 ms for reference change

Frequency resolution

  • analog input: 0.1...100 Hz
  • display unit: 0.1 Hz

Physical interface

RS485 multidrop serial link

Transmission frame

RTU

Transmission rate

  • 10, 20, 50, 125, 250, 500 kbps or 1 Mbps for CANopen
  • 4800, 9600 or 19200 bps for Modbus

Number of addresses

  • 1...127 for CANopen
  • 1...247 for Modbus

Number of drive

  • 127 for CANopen
  • 31 for Modbus

Operating position

vertical +/- 10 degree

Outer dimension

  • 390 x 245 x 190 mm
  • 595 x 234 x 268 mm
  • 330 x 245 x 190 mm

Network frequency

47.5...63 Hz

Dielectric strength

  • 2410 V DC between earth and power terminals
  • 3400 V AC between control and power terminals

Electromagnetic compatibility

  • 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5
  • electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
  • electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
  • radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3

Pollution degree

2

Protective treatment

TC

Vibration resistance

  • 1 gn (f= 13-150 Hz) conforming to EN/IEC 60068-2-6
  • 1.5 mm (f= 3-13 Hz) conforming to EN/IEC 60068-2-6

Shock resistance

15 gn for 11 ms conforming to EN/IEC 60068-2-27

Operating altitude

  • <= 1000="" m="" without="">
  • 1000...3000 m with current derating 1 % per 100 m

Unit Type of Package 1

PCE

Number of Units in Package 1

1

Package 1 Height

28.0 cm

Package 1 Width

29.0 cm

Package 1 Length

40.0 cm

Package 1 Weight

11.856 kg

Unit Type of Package 2

P06

Number of Units in Package 2

4

Package 2 Height

80.0 cm

Package 2 Width

80.0 cm

Package 2 Length

60.0 cm

Package 2 Weight

59.82 kg

WEEE

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
Show all specifications

Documents & downloads

hide show
Filter items
  • All

  • CAD Files and Packs

  • Technical Data Catalogues

  • End of Life Manual

  • Environmental Disclosure

  • Installation Instruction

  • Operating Manuals

  • Certificates (MSDS)

  • Declaration of Conformity

  • Software - Release