Quantcast

Soft-Start Stop 22A 200 480V

Soft-Start Stop 22A 200 480V

Soft-Start Stop 22A 200 480V

Item Number: ATSU01N222LT

Product Dimensions

Width icon

Width45 mm

Height icon

Height314 mm

Depth icon

Depth170 mm

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Warranty

18 months

Range of product

Altistart U01 and TeSys U

Product or component type

soft starter

Product destination

asynchronous motors

Physical

Function available

integrated bypass

Marking

CE

Height

314 mm

Width

45 mm

Depth

170 mm

Net weight

0.49 kg

Standards

EN/IEC 60947-4-2

Product certifications

  • C-Tick
  • CSA
  • UL
  • CCC

IP degree of protection

IP20

Relative humidity

5...95 % without condensation or dripping water conforming to EN/IEC 60068...2-3

Ambient air temperature for operation

  • -10...40 °C (without derating)
  • 40...50 °C (with current derating of 2 % per °C)

Ambient air temperature for storage

-25...70 °C conforming to EN/IEC 60947...4-2

REACh Regulation

Free of Substances of Very High Concern above the threshold

REACh free of SVHC

Yes

EU RoHS Directive

Pro-active compliance (Product out of EU RoHS legal scope)

Toxic heavy metal free

Yes

Mercury free

Yes

RoHS exemption information

Yes

China RoHS Regulation

X

Circularity Profile

ENVEOLI100217EN

California proposition 65

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Others

Assembly style

with heat sink

Supply voltage limits

180...528 V

Supply frequency

50...60 Hz - 5...5 %

Network frequency

47.5...63 Hz

Output voltage

<= power="" supply="">

[Uc] control circuit voltage

24 V DC +/- 10 %

Starting time

  • 1 s / 100
  • 5 s / 20
  • 10 s / 10
  • adjustable from 1 to 10 s

Deceleration time symb

adjustable from 1 to 10 s

Starting torque

30...80 % of starting torque of motor connected directly on the line supply

Discrete input type

logic (LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8="" ma="" 27="">

Discrete input voltage

24...40 V

Input output isolation

galvanic between power and control

Discrete input logic

positive LI1, LI2, BOOST at State 0: < 5="" v="" and=""><= 0.2="" ma="" at="" state="" 1:=""> 13 V, >= 0.5 mA

Discrete output current

  • 2 A DC-13
  • 3 A AC-15

Discrete output type

  • open collector logic LO1 end of starting signal
  • relay outputs R1A, R1C NO

Discrete output voltage

24 V (voltage limits: 6...30 V) open collector logic

Minimum switching current

10 mA at 6 V DC for relay outputs

Maximum switching current

  • relay outputs: 2 A at 30 V DC cos phi = 0.5 and L/R = 20 ms inductive load
  • relay outputs: 2 A at 250 V AC AC-15 cos phi = 0.5 and L/R = 20 ms inductive load

Maximum switching voltage

440 V relay outputs

Display type

  • 1 LED (green) for starter powered up
  • 1 LED (yellow) for nominal voltage reached

Tightening torque

  • 1.9...2.5 N.m
  • 0.5...0.5 N.m

Electrical connection

  • 4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuit
  • screw connector - flexible without cable end 2 0.5...1.5 mm² AWG 16 control circuit
  • screw connector - rigid 1 0.5...2.5 mm² AWG 14 control circuit
  • 4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuit
  • screw connector - rigid 2 0.5...1 mm² AWG 17 control circuit
  • screw connector - flexible with cable end 1 0.5...1.5 mm² AWG 16 control circuit
  • 4 mm screw clamp terminal - flexible without cable end 1 1.5...10 mm² AWG 8 power circuit
  • screw connector - flexible without cable end 1 0.5...2.5 mm² AWG 14 control circuit
  • 4 mm screw clamp terminal - flexible with cable end 2 1...6 mm² AWG 10 power circuit
  • 4 mm screw clamp terminal - flexible without cable end 2 1.5...6 mm² AWG 10 power circuit

Operating position

vertical +/- 10 degree

Power range

  • 4...6 kW at 200...240 V 3 phases
  • 7...11 kW at 380...440 V 3 phases

Motor starter type

soft starter

Electromagnetic compatibility

  • conducted and radiated emissions level B conforming to CISPR 11
  • immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3
  • voltage/current impulse level 3 conforming to IEC 61000-4-5
  • conducted and radiated emissions level 3 conforming to IEC 61000-4-6
  • immunity to conducted interference caused by radio-electrical fields conforming to IEC 61000-4-11
  • conducted and radiated emissions level B conforming to IEC 60947-4-2
  • damped oscillating waves level 3 conforming to IEC 61000-4-12
  • electrostatic discharge level 3 conforming to IEC 61000-4-2
  • EMC immunity conforming to EN 50082-1
  • EMC immunity conforming to EN 50082-2
  • harmonics conforming to IEC 1000-3-2
  • harmonics conforming to IEC 1000-3-4
  • immunity to electrical transients level 4 conforming to IEC 61000-4-4

Pollution degree

2 conforming to EN/IEC 60947-4-2

Vibration resistance

  • 1 gn (f= 13-150 Hz) conforming to EN/IEC 60068-2-6
  • 1.5 mm peak to peak (f= 3-13 Hz) conforming to EN/IEC 60068-2-6

Shock resistance

15 gn for 11 ms conforming to EN/IEC 60068-2-27

Operating altitude

  • <= 1000="" m="" without="">
  • > 1000 m with current derating of 2.2 % per additional 100 m

Unit Type of Package 1

PCE

Number of Units in Package 1

1

Package 1 Weight

554.0 g

Package 1 Height

5 cm

Package 1 width

17.2 cm

Package 1 Length

15 cm

Unit Type of Package 2

P06

Number of Units in Package 2

112

Package 2 Weight

77.036 kg

Package 2 Height

77 cm

Package 2 width

80 cm

Package 2 Length

60 cm

Unit Type of Package 3

S03

Number of Units in Package 3

14

Package 3 Weight

8.405 kg

Package 3 Height

30 cm

Package 3 width

30 cm

Package 3 Length

40 cm

WEEE

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

Product specific application

simple machine

Device short name

ATSU01

Network number of phases

3 phases

[Us] rated supply voltage

200...480 V - 10...10 %

Motor power kW

  • 11 kW, 3 phases at 400 V
  • 4 kW, 3 phases at 230 V
  • 7.5 kW, 3 phases at 400 V
  • 5.5 kW, 3 phases at 230 V

Motor power hp

  • 5 hp, 3 phases at 230 V
  • 7.5 hp, 3 phases at 230 V
  • 10 hp, 3 phases at 460 V
  • 15 hp, 3 phases at 460 V

IcL starter rating

22 A

Utilisation category

AC-53B conforming to EN/IEC 60947-4-2

Current consumption

100 mA

Type of start

start with voltage ramp

Power dissipation in W

  • 2.5 W at full load and at end of starting
  • 222.5 W in transient state
Show all specifications

Documents & downloads

hide show
Filter items
  • All

  • Product Brochures

  • CAD Files and Packs

  • Technical Data Catalogues

  • Installation Instruction

  • End of Life Manual

  • Technical Drawing

  • eTechPub

  • Certificates (MSDS)

  • Declaration of Conformity

Frequently Asked Questions

hide show

Does the ATS01 come with a shorting contactor?

Issue:
Does the ATS01 have an internal shorting contactor?

Product Line:
Altistat 01

Environment:
All

Cause:
N/A

Resolution:
All of the ALTISTART 01 models, except the ATS01N103FT and ATS01N106FT, have an internal shorting contactor as standard.