Frequently Asked Questions
ATS48 remote keypad dimensions.
Remote keypad part# VW3G48101
Width = 2 5/8 inches
Height = 4 1/4 inches
Depth = 5/8 inches
This includes a clear membrane cover and a trim bezel.
Minimum clearances required on the ATS48 soft starters?
Altistart 48, ATS48
Mounting inside an enclosure
There is a minimum of 4 inches (100 mm) on the top and bottom of the softstart. A minimum clearance of 2 inches (50mm) on each sides.
The enclosure must also allow for proper ventilation to maintain a temperature of 40C (104F) and required wire bending space.
Needs to reset the operating time to zero on the ATS48.
Altistart 48, softstart
Reset operating time
Yes. Can go into the dRc menu and in the rPr parameter: The options available here are:
- no: function inactive
- APH: kWh reset to zero
- trE: operating time reset to zero
The reset command must be confirmed with ENT. APH and trE take effect immediately.
The parameter then automatically returns to no.
Does the ATS48 unit provide separate power terminals to connect cables that feed the line side of the shorting contactor?
All models and serial numbers
All ATS48 Soft Starts
No. None of the ATS48 units have separate terminals for the line side of the shorting contactor. The ATS48 L1, L2, L3 terminals are for incoming line connections. This may require that separate terminal blocks be used to connect the line side of the shorting (bypass) contactor.
Note: There are contactor load terminals provided for A2, B2, C2.
The dimension of ATS22D17 to ATS22D47 are identical