Quantcast

Altistart 22 Soft Starter ATS22 Control, 220V Power 230V(110kW)/400...440V

Altistart 22 Soft Starter ATS22 Control, 220V Power 230V(110kW)/400...440V

Altistart 22 Soft Starter ATS22 Control, 220V Power 230V(110kW)/400...440V

Item Number: ATS22C41Q

Product Dimensions

Width icon

Width206 mm

Height icon

Height425 mm

Depth icon

Depth299 mm

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Sustainable offer status

Green Premium product

Warranty

18 months

Range of product

Altistart 22

Product or component type

soft starter

Product destination

asynchronous motors

Physical

Function available

internal bypass

Output current

0.4...1 Icl adjustable

Communication port protocol

Modbus

Connector type

1 RJ45

Protection type

  • phase failure: line
  • thermal protection: motor
  • thermal protection: starter

Marking

CE

Height

425 mm

Width

206 mm

Depth

299 mm

Net weight

33 kg

Standards

EN/IEC 60947-4-2

Product certifications

  • GOST
  • CCC
  • CSA
  • UL
  • C-Tick

Relative humidity

0...95 % without condensation or dripping water conforming to EN/IEC 60068...2-3

Ambient air temperature for operation

  • -10...40 °C (without derating)
  • 40...60 °C (with current derating 2.2 % per °C)

Ambient air temperature for storage

-25...70 °C

REACh Regulation

Reference contains Substances of Very High Concern above the threshold

EU RoHS Directive

Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free

Yes

RoHS exemption information

Yes

China RoHS Regulation

X

Environmental Disclosure

ENVPEP100402EN

Circularity Profile

ENVEOLI110805EN

California proposition 65

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

IP degree of protection

IP00

Others

Assembly style

with heat sink

Supply voltage limits

195...484 V

Supply frequency

50...60 Hz - 10...10 %

Network frequency

45...66 Hz

Device connection

  • to the motor delta terminals
  • in the motor supply line

[Uc] control circuit voltage

230 V - 15...10 % 50/60 Hz

Control circuit consumption

20 W

Discrete output number

2

Discrete output type

  • relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
  • relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O

Minimum switching current

100 mA at 12 V DC (relay outputs)

Maximum switching current

  • 5 A 250 V AC resistive 1 relay outputs
  • 5 A 30 V DC resistive 1 relay outputs
  • 2 A 250 V AC inductive 0.4 20 ms relay outputs
  • 2 A 30 V DC inductive 7 ms relay outputs

Discrete input number

3

Discrete input type

(LI1, LI2, LI3) logic, 5 mA 4.3 kOhm

Discrete input voltage

24 V <= 30="">

Discrete input logic

positive logic LI1, LI2, LI3 at State 0: < 5="" v="" and=""><= 2="" ma="" at="" state="" 1:=""> 11 V, >= 5 mA

PTC probe input

750 Ohm

Communication data link

serial

Physical interface

RS485 multidrop

Transmission rate

4800, 9600 or 19200 bps

Installed device

31

Type of cooling

forced convection

Operating position

vertical +/- 10 degree

Power range

  • 110...220 kW at 380...440 V 3 phases
  • 110...220 kW at 200...240 V 3 phases

Motor starter type

soft starter

Electromagnetic compatibility

  • conducted and radiated emissions level A conforming to IEC 60947-4-2
  • damped oscillating waves level 3 conforming to IEC 61000-4-12
  • electrostatic discharge level 3 conforming to IEC 61000-4-2
  • immunity to electrical transients level 4 conforming to IEC 61000-4-4
  • immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3
  • voltage/current impulse level 3 conforming to IEC 61000-4-5

Vibration resistance

  • 1 gn (f= 13-200 Hz) conforming to EN/IEC 60068-2-6
  • 1.5 mm (f= 2-13 Hz) conforming to EN/IEC 60068-2-6

Shock resistance

15 gn for 11 ms conforming to EN/IEC 60068-2-27

Noise level

56 dB

Pollution degree

level 2 conforming to IEC 60664-1

Operating altitude

  • <= 1000="" m="" without="">
  • > 1000...< 2000="" m="" with="" current="" derating="" of="" 2.2="" %="" per="" additional="" 100="">

Unit Type of Package 1

PCE

Number of Units in Package 1

1

Package 1 Weight

26.8 kg

Package 1 Height

49 cm

Package 1 width

37 cm

Package 1 Length

54.5 cm

Unit Type of Package 2

PAL

Number of Units in Package 2

1

Package 2 Weight

26.8 kg

Package 2 Height

49 cm

Package 2 width

37 cm

Package 2 Length

54.5 cm

WEEE

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

Product specific application

pumps and fans

Component name

ATS22

Network number of phases

3 phases

[Us] rated supply voltage

230...440 V - 15...10 %

Motor power kW

  • 110 kW 230 V
  • 220 kW 400 V
  • 220 kW 440 V

Factory setting current

388 A

Power dissipation in W

177 W for standard applications

Utilisation category

AC-53A

Type of start

start with torque control (current limited to 3.5 In)

IcL starter rating

410 A for connection in the motor supply line for standard applications
Show all specifications

Documents & downloads

hide show
Filter items
  • All

  • Product Brochures

  • CAD Files and Packs

  • Technical Data Catalogues

  • Installation Instruction

  • Product Environmental

  • End of Life Manual

  • Operating Manuals

  • eTechPub

  • Certificates (MSDS)

  • Marine Certificate

  • Declaration of Conformity

  • Software - Release

  • DTM Files