MASTER YOUR CASTLE with your new build or reno project
Enter competition
Soft start-soft stoft unit ATS 01N2
Soft start-soft stoft unit ATS 01N2
Soft start-soft stoft unit ATS 01N2
Soft start-soft stoft unit ATS 01N2

ATS01N222QN

Soft-Start Stop 22A 380 415V

Soft start-soft stoft unit ATS 01N2
Soft start-soft stoft unit ATS 01N2
Soft start-soft stoft unit ATS 01N2
Soft start-soft stoft unit ATS 01N2
Colour:
Colour: Per UOM Std.
  • 1 PCE
Added to cart
Successfully added, you can view your cart here

Key Features & Specifications

hide show
Range of product
Altistart 01
Product or component type
soft starter
Product destination
asynchronous motors
Product specific application
simple machine
Device short name
ATS01
Network number of phases
3 phases
[Us] rated supply voltage
380...415 V - 10...10 %
Motor power kW
  • 11 kW, 3 phases at 380...415 V
  • 7.5 kW, 3 phases at 380...415 V
    • IcL starter rating
      22 A
      Utilisation category
      AC-53B conforming to EN/IEC 60947-4-2
      Current consumption
      110 A at nominal load
      Type of start
      start with voltage ramp
      Power dissipation in W
    • 124.5 W in transient state
    • 4.5 W at full load and at end of starting
      • Assembly style
        with heat sink
        Function available
        integrated bypass
        Supply voltage limits
        342-456 V
        Supply frequency
        50...60 Hz - 5...5 %
        Network frequency
        47.5...63 Hz
        Output voltage
        <= power supply voltage
        [Uc] control circuit voltage
        built into the starter
        Starting time
      • 1 s / 100
      • 5 s / 20
      • 10 s / 10
      • adjustable from 1 to 10 s
        • Deceleration time symb
          adjustable from 1 to 10 s
          Starting torque
          30...80 % of starting torque of motor connected directly on the line supply
          Discrete input type
          logic (LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm
          Discrete input voltage
          24...40 V
          Discrete input logic
          positive LI1, LI2, BOOST at State 0: < 5 V and <= 0.2 mA at State 1: > 13 V, >= 0.5 mA
          Discrete output current
        • 2 A DC-13
        • 3 A AC-15
          • Discrete output type
          • open collector logic LO1 end of starting signal
          • relay outputs R1A, R1C NO
            • Discrete output voltage
              24 V (voltage limits: 6...30 V) open collector logic
              Minimum switching current
              10 mA at 6 V DC for relay outputs
              Maximum switching current
            • relay outputs: 2 A at 250 V AC cos phi = 0.5 and L/R = 20 ms inductive load
            • relay outputs: 2 A at 30 V DC cos phi = 0.5 and L/R = 20 ms inductive load
              • Display type
              • 1 LED (green) for starter powered up
              • 1 LED (yellow) for nominal voltage reached
                • Tightening torque
                • 0.5-0.5 N.m
                • 1.9-2.5 N.m
                  • Electrical connection
                  • 4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuit
                  • screw connector - flexible without cable end 2 0.5...1.5 mm² AWG 16 control circuit
                  • screw connector - rigid 1 0.5...2.5 mm² AWG 14 control circuit
                  • 4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuit
                  • screw connector - rigid 2 0.5...1 mm² AWG 17 control circuit
                  • screw connector - flexible with cable end 1 0.5...1.5 mm² AWG 16 control circuit
                  • 4 mm screw clamp terminal - flexible without cable end 1 1.5...10 mm² AWG 8 power circuit
                  • screw connector - flexible without cable end 1 0.5...2.5 mm² AWG 14 control circuit
                  • 4 mm screw clamp terminal - flexible with cable end 2 1...6 mm² AWG 10 power circuit
                  • 4 mm screw clamp terminal - flexible without cable end 2 1.5...6 mm² AWG 10 power circuit
                    • Marking
                      CE
                      Operating position
                      vertical +/- 10 degree
                      Height
                      154 mm
                      Width
                      45 mm
                      Depth
                      131 mm
                      Net weight
                      0.56 kg
                      Compatibility code
                      ATS01N2
                      Power range
                      7-11 kW at 380-440 V 3 phases
                      Motor starter type
                      soft starter
                      Electromagnetic compatibility
                    • conducted and radiated emissions level B conforming to CISPR 11
                    • immunity to electrical transients level 4 conforming to IEC 61000-4-4
                    • immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3
                    • micro-cuts and voltage fluctuation conforming to IEC 61000-4-11
                    • voltage/current impulse level 3 conforming to IEC 61000-4-5
                    • conducted and radiated emissions level B conforming to IEC 60947-4-2
                    • damped oscillating waves level 3 conforming to IEC 61000-4-12
                    • electrostatic discharge level 3 conforming to IEC 61000-4-2
                    • EMC immunity conforming to EN 50082-1
                    • EMC immunity conforming to EN 50082-2
                    • harmonics conforming to IEC 1000-3-2
                    • harmonics conforming to IEC 1000-3-4
                    • immunity to conducted interference caused by radio-electrical fields level 3 conforming to IEC 61000-4-6
                      • Standards
                        EN/IEC 60947-4-2
                        Product certifications
                      • CSA
                      • UL
                      • CCC
                      • B44.1-96/ASME A17.5 for starter wired to the motor delta terminal
                      • C-Tick
                      • GOST
                        • IP degree of protection
                          IP20
                          Pollution degree
                          2 conforming to EN/IEC 60947-4-2
                          Vibration resistance
                        • 1 gn (f= 13-150 Hz) conforming to EN/IEC 60068-2-6
                        • 1.5 mm peak to peak (f= 3-13 Hz) conforming to EN/IEC 60068-2-6
                          • Shock resistance
                            15 gn for 11 ms conforming to EN/IEC 60068-2-27
                            Relative humidity
                            5-95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
                            Ambient air temperature for operation
                          • -10-40 °C (without)
                          • 40-50 °C (with current derating of 2 % per °C)
                            • Ambient air temperature for storage
                              -25-70 °C conforming to EN/IEC 60947-4-2
                              Operating altitude
                            • <= 1000 m without
                            • > 1000 m with current derating of 2.2 % per additional 100 m
                              • REACh Regulation
                                Reference contains Substances of Very High Concern above the threshold
                                REACh free of SVHC
                                Yes
                                EU RoHS Directive
                                Pro-active compliance (Product out of EU RoHS legal scope)
                                Toxic heavy metal free
                                Yes
                                Mercury free
                                Yes
                                RoHS exemption information
                                Yes
                                China RoHS Regulation
                                X
                                Circularity Profile
                                ENVEOLI100217EN
                                WEEE
                                The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
                                CALIFORNIA PROPOSITION 65
                                WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
                                Warranty
                                18 months

                                Documents & downloads

                                hide show
                                Filter items
                                • All

                                • Product Brochures

                                • CAD Files and Packs

                                • Technical Data Catalogues

                                • End of Life Manual

                                • Installation Instruction

                                • Handout

                                • Product Environmental

                                • Data Bulletin

                                • Operating Manuals

                                • Application Solutions

                                • Certificates (MSDS)

                                • eTechPub

                                Frequently Asked Questions

                                hide show

                                Does the ATS01 come with a shorting contactor?

                                Issue:
                                Does the ATS01 come with a shorting contactor?

                                Product Line:
                                Altistat 01

                                Environment:
                                All

                                Cause:
                                N/A

                                Resolution:
                                All of the ALTISTART 01 models, except the ATS01N103FT and ATS01N106FT, have an internal shorting contactor as standard.

                                Is the LH4N still available?

                                Issue:
                                Is the LH4N still available?

                                Product Line:
                                LH4N

                                Environment:
                                All models and all serial numbers

                                Cause:
                                Customer was looking for purchasing the LH4N112RT7.

                                Resolution:
                                No, the LH4N soft starter is obsolete. Please replace with the appropriate ATS01 or ATS22 soft starter. Consider application needs and features of currently-offered products.


                                 

                                Are Softstarters acceptable for use in a Fire Pump applications?

                                Issue:
                                Are Softstarters acceptable for use in a Fire Pump applications?

                                Product line:
                                Altistart 22 48 ATS22 ATS48

                                Environment:
                                all

                                Cause:
                                Fire pump systems typically require the motors to run until they fail, without faulting the controller

                                Resolution:
                                No. The softstarters are not rated for Fire pump requirements and does not meet the requirements.
                                 

                                How can ATS01N2...LU, QN, RT be started without control wires?

                                Issue:
                                How can ATS01N2...LU, QN, RT be started without control wires?

                                Product Line:
                                Altistart 01 Soft Starters with "LU", "QN", or "RT" at the end of the part number

                                Environment:
                                All

                                Cause:
                                Need to start the Soft Starter with power up

                                Resolution:
                                Add a jumper between terminals LI+ and LI2.  This provides a continuous RUN command.  When power is supplied to the ATS01, it will immediately begin to start the motor.  Removing power will result in a freewheel stop.

                                 

                                What are the adjustment ranges for the dials on an ATS01N2..LU/QN/RT?

                                What are the adjustment ranges for the dials on an ATS01N2..LU/QN/RT?


                                Issue:

                                Adjusting Altistart 01 Soft Starters


                                Product Line:
                                Altistart 01


                                Environment:
                                All


                                Cause:
                                N/A


                                Resolution:

                                For both the START TIME and STOP TIME dials, setpoint A is 1second and setpoint E is 10seconds.  There is a linear relationship from A to E setpoints.
                                For the INITIAL VOLTAGE dial, setpoint A is 30% and setpoint E is 80% of full voltage.  There is a linear relationship from A to E setpoints.