Smartlink SI-D Gateway

Back to PowerTag Energy Sensor Home Acti9 System PowerTag Energy Sensor

Smartlink SI-D Gateway

Smartlink SI-D Gateway

Item Number: A9XMWA20

Where To Buy

Datasheet

Download

Product Dimensions

Width icon

Width54 mm

Height icon

Height85 mm

Depth icon

Depth67.5 mm

See full specifications

Barcode

Qty UoM EAN Colour
-
-
-
See all

Specifications

Design

Range of product

Acti9

Range

Acti9

Product or component type

smart communication module

Device application

  • basic energy metering E
  • improved load monitoring E, U, I, P, Pf
  • load alarming

Physical

Local signalling

  • product status: 1 LED (green, orange and red)
  • Ethernet status (LAN ST): 1 LED (green, orange and red)

Mounting position

vertical on DIN rail

Electrical insulation class

class III

Height

85 mm

Width

54 mm

Depth

67.5 mm

Net weight

133 g

Range compatibility

Acti 9 (PowerTag) wireless energy sensor

IP degree of protection

  • IP20 conforming to IEC 60529
  • IP40 (modular enclosure) conforming to IEC 60529

Relative humidity

93 % at 40 °C

Ambient air temperature for operation

-25...55 °C

Ambient air temperature for storage

-40...85 °C

EU RoHS Directive

Compliant

Mercury free

Yes

RoHS exemption information

Yes

China RoHS Regulation

Product out of China RoHS scope. Substance declaration for your information

Environmental Disclosure

ENVPEP1604024

Circularity Profile

ENVEOLI1604024

Others

Package 1 Bare Product Quantity

1

Product name

Acti9 Smartlink

Device short name

Smartlink SI D

Connected auxiliaries

up to 20 wireless devices

Maximum supply current

2 A

[Us] rated supply voltage

110...230 V AC +/- 20 %

Connectivity to devices

wireless energy sensor

Communication service

  • Ethernet Modbus TCP/IP server
  • web server

Web server

  • embedded web page
  • BMS controller compatible

Transmission support medium

radio frequency 2.4-2.4835 GHz PowerTag 20

Web services

web page

Application specific I/O

pulse totalising counter

Power consumption in VA

5 VA

Immunity to microbreaks

10 ms

Reset

factory reset on front face

Location of connection

upstream

Overvoltage category

III

9 mm pitches

6 useful

Commissioning interface

  • web page
  • ECOREACH

Compatibility code

Acti 9 Smartlink IP

Pollution degree

2

Tropicalisation

2

Operating altitude

0...2000 m

Unit Type of Package 1

PCE

Number of Units in Package 1

1

Package 1 Height

8.500 cm

Package 1 Width

6.500 cm

Package 1 Length

11.100 cm

Package 1 Weight

192.000 g

Unit Type of Package 2

S03

Number of Units in Package 2

36

Package 2 Height

30.000 cm

Package 2 Width

30.000 cm

Package 2 Length

40.000 cm

Package 2 Weight

7.355 kg

Unit Type of Package 3

P06

Number of Units in Package 3

288

Package 3 Height

75.000 cm

Package 3 Width

60.000 cm

Package 3 Length

80.000 cm

Package 3 Weight

69.500 kg

WEEE

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
Show all specifications

Frequently Asked Questions

hide show

Acti 9 Smartlink SI D (A9XMWA20) Firmware Upgrade: Can it be done when connected through an Ethernet Router?

Note: Acti 9 Smartlink SI D (A9XMWA20) has been replaced by Acti9 PowerTag Link (A9XMWD20 & A9XMWD100) which will also be replaced with the latest EcoStruxure Panel Server

The firmware upgrade of Acti 9 Smartlink SI D (or any successor products mentioned above) is recommended to be performed through direct connection to the gateway.
direct

In some instances, the upgrade process can fail if the Smartlink is connected behind an Ethernet Router. Smartlink in boot mode cannot send packet through a router.

This may result the gateway to be in boot/degraded mode permanently. In this case the gateway cannot be recovered and will need a replacement.

You can identify whether gateway in the degraded mode by checking the status LEDs as below.
LED Status1

LED Status2