C120H 2P 63A…125A; Miniature Circuit Breaker

Acti 9 C120H Circuit Breaker, 2P, 63A, 415V, D Curve

Catalogue Number: A9N18500
C120H 2P 63A…125A; Miniature Circuit Breaker
Colour: Per UOM Std.
  • 1 PCE


hide show
Range of product
Acti 9
Product name
Product or component type
miniature circuit-breaker
Device short name
Device application
Poles description
Number of protected poles
Neutral position
[In] rated current
63 A at 30 °C
Network type
Trip unit technology
Curve code
Breaking capacity code
Breaking capacity
  • 15000 A Icn at 230...400 V AC 50/60 Hz conforming to EN/IEC 60898-1
  • 10 kA Icu at 440 V AC 50/60 Hz conforming to EN/IEC 60947-2
  • 15 kA Icu at <= 250 V DC conforming to EN/IEC 60947-2
  • 15 kA Icu at 380...415 V AC 50/60 Hz conforming to EN/IEC 60947-2
  • 30 kA Icu at 220...240 V AC 50/60 Hz conforming to EN/IEC 60947-2
    • Suitability for isolation
      yes conforming to IEC 60947-2
      Network frequency
      50/60 Hz
      [Ue] rated operational voltage
    • 380...415 V AC 50/60 Hz
    • 220...240 V AC 50/60 Hz
    • 440 V AC 50/60 Hz
    • <= 250 V DC
    • 230...400 V AC 50/60 Hz
      • Magnetic tripping limit
        10...14 x In
        [Ics] rated service breaking capacity
      • 7500 A 50 % conforming to EN/IEC 60898-1 - 230...400 V AC 50/60 Hz
      • 5 kA 50 % conforming to EN/IEC 60947-2 - 440 V AC 50/60 Hz
      • 15 kA 50 % conforming to EN/IEC 60947-2 - 220...240 V AC 50/60 Hz
      • 7.5 kA 50 % conforming to EN/IEC 60947-2 - 380...415 V AC 50/60 Hz
      • 15 kA 100 % conforming to EN/IEC 60947-2 - <= 250 V DC
        • Limitation class
          3 conforming to EN/IEC 60947-2
          [Ui] rated insulation voltage
          500 V AC 50/60 Hz conforming to EN/IEC 60947-2
          [Uimp] rated impulse withstand voltage
          6 kV conforming to EN/IEC 60947-2
          Contact position indicator
          Control type
          Local signalling
          ON/OFF indication
          Mounting mode
          Mounting support
          35 mm symmetrical DIN rail
          Comb busbar and distribution block compatibility
          Connection pitch
          9 mm pitches
          81 mm
          54 mm
          73 mm
          Net weight
          0.41 kg
          Mechanical durability
          20000 cycles
          Electrical durability
          10000 cycles conforming to IEC 60947-2
          Connections - terminals
        • tunnel type terminals1-50 mm² rigid
        • tunnel type terminals1.5-35 mm² flexible
          • Wire stripping length
            15 mm
            Tightening torque
            3.5-3.5 N.m
            Earth-leakage protection
            separate block
            Compatibility code
            Market segment
          • residential
          • small commercial
            • Standards
            • EN/IEC 60898-1
            • EN/IEC 60947-2
              • Product certifications
                IP degree of protection
                IP20 conforming to IEC 60529
                Pollution degree
                3 conforming to IEC 60947-2
                Overvoltage category
                2 conforming to IEC 60068-1
                Relative humidity
                95-95 % at 55-55 °C
                Operating altitude
                2000 m
                Ambient air temperature for operation
                -30-60 °C
                Ambient air temperature for storage
                -40-70 °C
                Sustainable offer status
                Green Premium product
                REACh Regulation
                Free of Substances of Very High Concern above the threshold
                REACh free of SVHC
                EU RoHS Directive
                Toxic heavy metal free
                Mercury free
                RoHS exemption information
                China RoHS Regulation
                 Pro-active China RoHS declaration (out of China RoHS legal scope)
                Environmental Disclosure
                Circularity Profile
                The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
                18 months

                Documents & downloads

                hide show
                Filter items
                • All

                • Product Brochures

                • CAD Files and Packs

                • Technical Data Catalogues

                • Catalog Page

                • Product Environmental

                • End of Life Manual

                • Installation Instruction

                • Application Solutions

                • Certificates (MSDS)

                • Declaration of Conformity

                Frequently Asked Questions

                hide show

                Wanted to know if A9N18524 can be used as 3 pole breaker instead of 4 pole?

                Yes, customer can use the 3 pole and leave 4 pole open.

                If a 3 pole 63A ,D curve 10kA MCB is no longer available in the C120 frame - what can I use instead?

                Code = A9N18511  3 pole, 15kA, 63A, (27mm wide)   

                Are the A9N18359 and A9A26924 compatible?

                The ref A9N18359 is C120 MCB (Multi9 design in the white material).

                The ref A9A26924 is iOF auxiliary (Aciti9 design for iC60 MCB).

                I can confirm that the parts A9N18359 and A9A26924 are not compliant with each other


                What is the new code for the 18364?

                The new code is now A9N18364

                How many poles wide is the iC120 3 pole 80amp C/B - A9N18365?

                The A9N18365 is 3 pole wide but is 27mm per pole , thus meaning it will need a 4.5 pole wide enclosure 81mm
                For further information , visit link below:-
                User-added image

                What is the replacement for 18354, 4P pole , B curve, 100A, 10KA circuit breaker?

                We do not have a direct replacement for 18354. We have A9N18436 which is rated to 15KA.  A9N18436 is 4P pole , B curve, 100A, 15KA circuit breaker.
                For further information, please visit https://www.schneider-electric.com/en/product/A9N18436/c120h---circuit-breaker---4p---100a---b-curve/


                Is it okay to terminate aluminium cables to the Acti 9 MCB's?

                Aluminium is more corrosive than copper and it can cause high resistance to the current flow over the period of time, So it is highly recommend to use the 27060 aluminium connection terminal if you are using Aluminium cables. 

                What is the part number for the 80 amp 3 pole and neutral 30mA RCBO, 10kA?

                The RCBO is made up with the 4 pole iC120N circuit breaker, part number A9N18372 plus add the 4 pole Vigi unit A9N18578



                User-added image    User-added image

                Where can I download documentation for the ION8300, ION8400 and ION8500 series meters?

                A user needs to download documentation for the ION8300, ION8400 and ION8500 series meters.
                Product Line:
                ION8300, ION8400 and ION8500

                Installation Guide, User Guide, Datasheet, DNP3 Device Profile, I/O Expander Installation, Modbus Register Map, Retrofit Instructions
                A user needs to download various documentation for the ION8300, ION8400 and ION8500.
                See the attached documents below.

                Device Support - Updater for ION8500 V244 meters in ION Enterprise

                Older versions of the ION Enterprise software either do not natively support the ION8500 device types or do not support all features available in the latest available firmware.

                Product Line
                ION Enterprise V5.0 
                ION Enterprise V5.5
                ION Enterprise V5.6 

                Device Support Update

                To support new firmware features, download the ION Enterprise software updater below. These updater files are compatible with ION Enterprise and Pegasys. Remember that upgrader files must be applied to all machines in your ION Enterprise network, including all primary, secondary and client machines, for the upgrades to be effective.


                What is the Updater program?
                When versions of ION Enterprise are released, they support Power Measurement meters only up to the date of release. In order for our software to correctly recognize new firmware versions on the meters, the Updater program was created. These files are designed to install the components necessary to support the new firmware releases for ION meters.

                ION8500 Meter Template Files

                Product Line


                You can install meter templates using ION Setup. See the "Upgrading ION Device Firmware" technical note for complete details.

                Install Templates with ION Setup

                1. Download the device template and save it to your ION Setup TEMPLATE folder (select the file below that matches your meter's feature set).

                Use these .DCF files with ION Setup to perform firmware upgrades. These are default meter templates only. If you have custom programming in your meter, create your own template file before performing the firmware upgrade.

                1. Follow the upgrade procedures outlined in the Upgrading ION Device Firmware technical note.
                See the .zip below for the following templates:
                Version Low Current (Class 2) Standard (Class 20) ECR (Class 2-20)
                V264-265 8500_FAC-9S-39S-36S-76S_V2.
                V262 8500_FAC-9S-39S-36S-76S_V2.
                V244 8500_v240_FAC-9S-39S_V1.

                ION 8500v280 downgrade fails

                If an ION8500 has firmware version v280, it means that it is a RevB meter. This meter has be repaired with parts an ION 8600, which is why it has the unique "RevB" firmware.
                All attempts to downgrade this meter to versions lower than v280 (using ION Enterprise or ION Setup) will fail.

                Last Revised: November 23, 2007
                Applies To: ION 8500
                All content © 1992-2007 Schneider Electric

                Legacy KB System (APS) Data: RESL189623 V1.0, Originally authored by KBAdPM on 11/24/2007, Last Edited by KBAdPM on 11/24/2007
                Related ranges: ION Setup 2.0, ION Setup 2.1, ION8500

                Which meters can ION Setup extract DGD log information from?

                Retrieving DGD logs from ION meters when troubleshooting issues.

                ION Setup, ION6200, ION7300, ION7330, ION7350, ION7400, ION7500, ION7550, ION7600, ION7650, ION7700, ION8300, ION8400, ION8500, ION8600, ION8650, PM8000

                ION Setup

                ION Setup can extract DGD logs from  ION7400, ION7500, ION7550, ION7600, ION7650, ION8300, ION8400, ION8500, ION8600, ION8650, PM8000 meters. 
                It cannot extract DGD logs from ION6200, ION7300, ION7330, ION7350, ION7700 meters.

                What is the RMICAN approved Voltage range for metering devices?

                A customer may want to know the approved voltage range for RMICAN metering

                Product Line
                ION6200 Meters
                ION7300 Series Meters
                ION7500 Series Meters
                ION7600 Series Meters
                ION7700 Meters
                ION8300 Meters
                ION8400 Meters
                ION8500 Meters
                ION8600 Series Meters

                Metering & Power Monitoring

                a user may want specific voltage range information with regard to RMICAN availability and acceptability

                The RMICAN certification is given for a range from 69V-480V. If one wants certification at a different nominal voltage, a new certification for the given nominal voltage has to be issued. The local Measurement Canada Rep should be where to apply since regulations might differ from one location to another.

                ION8500 Firmware for V281, V265, V262 and V244


                When upgrading your meter's firmware please download the latest firmware version (.upg file) and the equivalent Meter Template (.dcf file).

                You can upgrade meter firmware using ION Setup or ION Enterprise. See the "Upgrading ION Device Firmware" technical notefor complete details.

                Important Device Update (Jan 2008)

                To discover whether your meter is a revision A or revision B meter, check the faceplate on the meter.

                Revision B (RevB) meters will have a "RevB" written on the right hand side of the label, above the serial number. RevA meters will not have this mark on the label.

                To upgrade a RevB device, users must use the latest ION Setup.


                Firmware for Revison A meters

                Firmware (.UPG file) text text RMICAN Approved
                Low Current
                (Class 2)
                (Class 20)
                (Class 2-20)
                8500V2628500V262_8000_FAC_V1.1.0.exe RMICAN Approved
                V244 9S-39S8500_9S_39S_1A.exe

                V244 35S8500_35S_1A.exe

                V244 36S-76S8500_36S_76S_1A.exe

                V244 9S-39S8500_9S_39S_5A.exe

                V244 35S8500_35S_5A.exe

                V244 36S-76S8500_36S_76S_5A.exe

                V244 9S-39S8500_9S_39S_ECR.exe

                V244 35S8500_35S_ECR.exe

                V244 36S-76S8500_36S_76S_ECR.exe


                Firmware for Revison B meters



                Legacy KB System (APS) Data: RESL205224 V1.0, Originally authored by DaMi on 04/30/2011, Last Edited by DaMi on 04/30/2011
                Related ranges: ION8500

                Video: How to upgrade firmware on an ION meter with ION Setup

                A user would like to upgrade the firmware on an ION meter.

                Product Line
                ION7xxx series
                ION8xxx series
                PM8000 series

                Firmware upgrade

                *Warning: The firmware utilities listed here can cause permanent damage to your product if applied incorrectly. Before downloading any firmware updates, verify the firmware you are downloading is appropriate for the specific model number of your product. If you have any doubts, contact Technical Support for guidance.

                *Warning: Devices should be disconnected from all monitoring software before performing a firmware upgrade.

                *Warning: Installation and maintenance of this device should only be performed by qualified, competent personnel that have appropriate training and experience with high voltage and current devices. Failure to follow the instructions / warnings in the Meter Installation Guide can result in permanent damage to the meter, severe injury or death. 

                NOTE 1: Before attempting a firmware upgrade on an ION meter, backup the existing template on the meter.
                NOTE 2: Ensure the meter is disabled in any software application communicating to the device to avoid interference during the firmware upgrade
                NOTE 3: To upgrade firmware on the PM8000 series meter, please ensure ION Setup v3.0.15140.02 and above is used. The latest version of ION Setup can be downloaded here: https://schneider-electric.app.box.com/v/ionsetuplatest

                Here are the instructions on how to upgrade an ION meter's firmware via ION Setup software:

                1. Connect to the meter using ION Setup.
                2. Open Setup Assistant from the right pane of the screen. To save the existing template, click on template > Save; on the Save to PC tab.

                3. To upgrade the firmware, click on the tab labeled "Firmware Upgrade" in the template section and then "upgrade"

                4. Select the firmware upgrade file and click next to upgrade the firmware on the meter.

                5. During the firmware upgrade a process, the user would be prompted to select a template to be loaded on to the meter. At this point, the user may select the already saved template file OR upload the corresponding factory default template to that firmware version.

                ION8500 Firmware Features (Public Release Notes) for V261, V244, V240 and V232

                New Features in the V261 firmware:

                Firmware version 261 for the ION 8000 series supports the following new features:

                Adds several DNP protocol enhancements, including:

                  • DNP supported over Ethernet.
                  • Multi-port DNP support for up to three simultaneous connections in any combination of serial and Ethernet.
                Adds IRIG-B* functionality (order option):
                  • All IRIG-B equipped meters are configured in the factory to synchronize via GPS using unmodulated IRIG-B time code data.
                *This option requires a receiver capable of unmodulated IRIG-B time code output (not included).

                New Features in the V244 firmware:

                Firmware version 244 (V244) for the ION 8500 meter supports the following new features:

                  • Adds factory terminal support to choose between Temperature Compensation Algorithm and Crystal Option for the clock.
                  • Fixes behaviour... Meter stays in test mode through power cycle with advanced securities enabled.

                New Features in the V240 firmware:

                Networking and Internet Connectivity
                  • More robust and stable TCP/IP stack is introduced.
                  • New configurable Web Pages are introduced.
                  • Log Mail module has been replaced by the Log Export module, which sends log data in an XML format that is compatible with the MeterMail Archive.
                Rapid Meter Programming

                Rapid Meter Programming dramatically reduces the time required to complete a framework upgrade operation in ION 8000 series. It allows customers to load a complete custom framework into an ION device in approximately 5 minutes over a 9600-baud serial connection. For this feature to operate there must be a compatible version of ION Setup.

                Instrument Transformer Correction Module

                The Instrument Transformer Correction module is a core module that allows customers to correct for inaccuracies in the current transformers (CT’s) and potential transformers (PT’s). There is an Instrument Transformer Correction module for each current and voltage input into the meter.

                The primary application for instrument transformer correction is to apply correction factors for ratio errors and phase angle errors to instrument transformers. Instrument transformer correction reduces or eliminates the need to replace transformers in installations where high-accuracy is required.

                Integrator Module

                Version V240 allows Integrator modules to count by steps (every 15 minutes) to allow more accurate validation in MV90.


                Resetting battery counters through ION Setup, or ION Designer is provided.

                Harmonic Measurements

                Enhancements made to the Harmonics Measurement Module (HME):

                  • An evaluate input to be pulsed at 15s or 10 minute intervals to perform RMS averaging according to IEC (6)1000-4-7.
                  • A setup register for selecting whether the values are provided in engineering units or percentage of the fundamental.
                  • A setup register for specifying, if the Evaluate input is linked, whether the output values represent the maximum of the 'TVS values' or the average of the 'TVS values'.
                Sag/Swell Event Monitoring

                If sag/swell event is accompanied with an power outage event, the sag/swell module now reports the sag/swell info as well as the actual outage duration.

                The V240 release also fixes, or improves the following:

                  • The output register named as "Battery Minutes" in ION Diagnostic Module is renamed as "Battery Remaining".
                  • Alert Module – Trigger pulses occurred first 30 seconds during start up will not be ignored.
                  • Alert Module - Alert will accept control commands <CR><LF>.
                  • Demand Update - Predicted Demand calculated correctly now in "Every Second" mode.
                  • Demand Update - Output timestamps is now updated in "Every Second" mode.
                  • DNP – number of output handles returned is now correct.
                  • 10 New Counter Modules added.
                  • Configurable receive timeout is added to Ethernet COM’s.
                  • 5 New External Boolean Modules.
                  • Initialization of Digital Inputs is corrected. Prior to V240, if the digital inputs are ON during startup, the meter reports incorrect transitions on digital inputs.

                New Features in V232 firmware:
                  • Support for time and date formats in the display modules, enabling displays with nothing but date and/or time and/or time remaining in the current demand interval.
                  • Improved disk simulator
                  • A new Ethernet port option on ION 8300 meters.
                  • Enhanced Test Functions when using Transformer Loss Compensation. Easier meter testing is now possible because the addition of a single-phase TLC (transformer loss compensation) algorithm meaning users can run the meter in Test Mode using a single phase test set rather than having to use a three phase test set.
                  • Improved Logging on Power Outages. Customers can now choose an option that determines how the meter handles logged information after a power outage condition.
                  • Variable update rate for demand values - the Sliding Window/Rolling Block module has a new setup register "Update Rate" that defines the update rate of the SWin Demand output register. Updates can be made at the end of each sub-interval or every second. Updates every second are required for Demand Forgiveness functionality. For more information, refer to the Sliding Window module description in the online ION Programmers Reference.

                Since V231 ION 8000 series firmware has contained advanced security. Pegasys users must NOT enable this feature as you will no longer be able to communicate to the meter. The Advanced Security feature is designed to work with ION Enterprise and ION Setup.

                Ethernet-connected meter communicating with ION Enterprise/StruxureWare Power Monitoring/Power Monitoring Expert "Lock Up"

                An Ethernet-connected meter appears to be connected in management console, but is marked offline in Diagnostics Viewer, real-time data cannot be displayed for the meter in Vista, and logged data is not being downloaded from the meter. Testing the connection with ping or by connecting with ION Setup is usually successful. Disconnecting the meter and reconnecting in Management Console usually restores communications to the meter, but sometimes either the PC or the meter must be rebooted.

                Note: All references to ION Enterprise are synonyms with System Power Monitoring and Power Monitoring Expert

                This article refers to a very specific condition which can be confirmed through the following symptoms:

                1. Real-time views of the meter in Vista show yellow boxes indicating a meter that is off-line
                2. The device shows a site status of Connected in Management Console
                3. Diagnostic Viewer (Communications Diagnostics > Site Overview) shows:
                  1. Device status as offline.
                  2. Good Responses counter is no longer increasing
                  3. Bad Responses is slowly increasing.
                  4. Last Attempt is usually the current time, but
                  5. Last Response is some time in the past. (Normally, attempt time and response time are the same timestamp, or apart by a few seconds)
                4. A netstat command shows that a connection is still established between ION Enterprise and the meter. At a command prompt, type

                                 netstat an | find <ip address of meter>

                                 Example output from netstat for meter at

                                 TCP ESTABLISHED

                1. To definitively confirm this problem, disconnect the affected meter using Management Console, and reconnect. Repeat step 4, and the netstat command will display more than one connection, including the old one in the state FIN_WAIT_1 (an orphaned connection)
                                 TCP FIN_WAIT_1

                                 TCP ESTABLISHED

                1. It may be possible that you cannot re-connect to the meter using this method. This usually occurs when all four connections to the meter are now used, often from multiple instances of ION Enterprise. In this case, there are two typical resolutions:
                  1. Reset (power down/up) the meter to clear all connections. Site Server will reestablish the connection on restart.
                  2. Reboot all ION Enterprise servers connected to the meter.

                Product Line
                ION7550 RTU
                ION7500 RTU
                Siemans9510 ADR
                Siemans9500 ADR
                ION Enterprise 5.x, 6.x
                StruxureWare Power Monitoring 7.x
                Power Monitoring Expert 7.2.x, 8.x

                Ethernet Meters

                The meter enters this state due to a unexpected condition in the TCP/IP stack code in firmware. Generally, users will see this condition only when:

                1. The meter has been continually connected to the server for a long period of time, and/or
                2. A large volume of data has been sent FROM the PC to the meter. This is most typically the case with deployments that result in sustained high polling rates. Examples include, continuous real-time polling of all meters in a system for indefinite periods of time (i.e. leaving Vista diagrams open to meters for an extended period of time), or the use of custom meter frameworks that introduce rapid logging (causing the Log Inserter to continuously download records at a high rate)

                Firmware upgrades are required in order to eliminate this condition. Upgrades at or above the following version numbers will resolve the condition:

                • ION7550/7650 V350 (V340 also resolved this problem)
                • ION7550 RTU V222
                • ION8600: V321
                • ION8800: V331
                • ION7500/7600 V254
                • ION7500 RTU V122
                • ION8300/8400/8500 A/B: V265(A), V281(B)
                • Siemans9510/9610 V350 (V340 also resolved this problem)
                • Siemans9510 ADR V222
                • Siemans9500/9600 V254
                • Siemans9500 ADR V122

                As described in symptoms, the meter connection can be re-established by disconnecting and reconnecting the meter in Management Console. This will leave an orphaned connection as described. If the customer is experiencing a large number of these orphaned connections, a third-party tool such as SysInternals TCPView tool can be used to identify these connections, and then close them.

                Alternately, the resolutions described above can also be used:

                1. Reset (power down/up) the meter to clear all connections. Site Server will reestablish the connection on restart.
                2. Reboot all ION Enterprise servers connected to the meter.

                What device types are natively supported and compatible in ION Setup 3.0?

                A list of devices supported and / or compatible in the most recent version of ION Setup 3.0.

                Product Line
                ION Setup version 3.0.17073.01

                Supported Device types and compatiblity with ION Setup software

                The posted ION Setup user manual is not updated as frequently as new software versions are released. The manual states that, “The devices supported by ION Setup are subject to change”.

                UPDATED 3/16/2017
                The list below indicates devices that are currently supported in the latest version of ION Setup. Definitions of abbreviations and acronyms can be found further below.

                Please note that many devices listed here have very limited functionality in ION Setup, and are only present for troubleshooting or commissioning purposes.
                Schneider Electric SquareD Siemens Power Measurement Ltd. Other
                ION8800 Power Meter
                ION7400 Power Meter
                ION7550 Power Meter
                ION7650 Power Meter
                ION8650 Power Meter
                PowerLogic BCPM
                PowerLogic BCPME
                EasyLogic DM6200 Digital Meter
                EasyLogic DM6300 Digital Meter
                PowerLogic E5600 Energy Meter
                EasyLogic EM1200 Energy Meter
                EasyLogic EM1220 Energy Meter
                PowerLogic EM3550 Energy Meter
                PowerLogic EM3555 Energy Meter
                PowerLogic EM4900 
                PowerLogic EM6400 Energy Meter
                PowerLogic EM6400NG Energy Meter
                PowerLogic EM6430 Energy Meter
                PowerLogic EM6433 Energy Meter
                PowerLogic EM6434 Energy Meter
                PowerLogic EM6435 Energy Meter
                PowerLogic EM6436 Energy Meter
                PowerLogic EM6438 Energy Meter
                PowerLogic EM6459 Energy Meter
                PowerLogic EM7230 Energy Meter
                PowerLogic EM7280 Energy Meter
                PowerLogic EM7290 Energy Meter
                PowerLogic Enercept Meter
                PowerLogic Enercept E23C6 Meter
                PowerLogic iEM3150 Energy Meter
                PowerLogic iEM3155 Energy Meter
                PowerLogic iEM3250 Energy Meter
                PowerLogic iEM3255 Energy Meter
                PowerLogic iEM3350 Energy Meter
                PowerLogic iEM3355 Energy Meter
                EasyLogic PM1200 Power Meter
                EasyLogic PM2120 Power Meter
                EasyLogic PM2130 Power Meter
                EasyLogic PM2220 Power Meter
                EasyLogic PM2230 Power Meter
                PowerLogic PM3250 Power Meter
                PowerLogic PM3255 Power Meter
                PowerLogic PM5110 Power Meter
                PowerLogic PM5111 Power Meter
                PowerLogic PM5200 Power Meter
                PowerLogic PM5250 Power Meter
                PowerLogic PM5310 Power Meter
                PowerLogic PM5311 Power Meter
                PowerLogic PM5320 Power Meter
                PowerLogic PM5330 Power Meter
                PowerLogic PM5331 Power Meter
                PowerLogic PM5340 Power Meter
                PowerLogic PM5341 Power Meter
                PowerLogic PM5350 Power Meter
                PowerLogic PM5560 Power Meter
                PowerLogic PM5561 Power Meter
                PowerLogic PM5563 Power Meter
                PowerLogic PM8000 Power Meter
                PowerLogic PM200 Power Meter
                PowerLogic PM600 Power Meter
                PowerLogic PM620 Power Meter
                PowerLogic PM650 Power Meter
                PowerLogic PM700 Power Meter
                PowerLogic PM750 Power Meter
                PowerLogic PM810 Power Meter
                PowerLogic PM820 Power Meter
                PowerLogic PM850 Power Meter
                PowerLogic PM870 Power Meter
                PowerLogic CM2050 Circuit Monitor
                PowerLogic CM2150 Circuit Monitor
                PowerLogic CM2250 Circuit Monitor
                PowerLogic CM2350 Circuit Monitor
                PowerLogic CM2450 Circuit Monitor
                PowerLogic CM3250 Circuit Monitor
                PowerLogic CM3350 Circuit Monitor
                PowerLogic CM4000T Circuit Monitor
                PowerLogic CM4250 Circuit Monitor
                4300 Power Meter
                4700 Power Meter
                4720 Power Meter
                9200 Power Meter
                9300 Power Meter
                9330 Power Meter
                9340 Power Meter
                9350 Power Meter
                9360 Power Meter
                9410 Power Meter
                9500 Power Meter
                9500 RTU
                9510 Power Meter
                9510 RTU
                9600 Power Meter
                9610 Power Meter
                9700 Power Meter
                3300 ACM Power Meter
                3350 PDM Power Demand Monitor
                3710 ACM Power Meter
                3720 ACM Power Meter
                3750 PDC Demand Controller
                3800 RTU
                ION6200 Power Meter
                ION6300 Power Meter
                ION7300 Power Meter
                ION7330 Power Meter
                ION7350 Power Meter
                ION7500 Power Meter
                ION7500 RTU
                ION7550 Power Meter
                ION7550 RTU
                ION7600 Power Meter
                ION7650 Power Meter
                ION7700 Power Meter
                ION8300 Power Meter
                ION8400 Power Meter
                ION8500 Power Meter
                ION8600 Power Meter
                ION8800 Power Meter
                ION9000 Power Meter
                Allen-Bradley 1400 PB Power Meter
                Allen-Bradley 1400 PD Power Meter
                ABB 8300 Power Meter
                ABB 8400 Power Meter
                ABB 8500 Power Meter
                GE 7700 ION Power Meter
                Micrologic ULP Circuit Breaker

                List of supported Modbus RTU-based devices:
                Veris BCM
                Momentum PLC A8
                Momentum PLC A16
                Momentum PLC D10
                Momentum PLC D16
                Twido PLC D12
                Twido PLC D28
                Twido PLC D44

                Mod: Modbus
                RTU: Remote Terminal Unit
                BCPM: Branch Circuit Power Meter
                BCM: Branch Current Monitor
                ULP: Universal Logic Plug
                WAGES: Water Air Gas Electricity Steam
                EPSS: Emergency Power Supply System
                PLC: Programmable Logic Controller

                To download the latest version of ION Setup software, refer to article FA212816

                Where can I get support for APC and MGE Products?

                For support on APC and MGE products please visit:  https://www.apc.com/support/

                AC Power
                Additional Management Cards and Options
                Air Cooled Chillers
                Air Distribution Accessories
                Airflow Management
                AIS 3000
                AIS 5000
                AIS Accessories
                AIS Battery Systems
                APC CS
                APC Enterprise Manager
                APC ES
                APC RS
                Application Shutdown Utilities
                Assessment Services
                Auto and Air Inverters
                AV Accessories
                AV Power Conditioners & Battery Backups
                AV Power Filters
                AV Pro Interconnects
                AV Surge Protectors
                Backpacks and Messenger Bags
                Back-UPS Accessories
                Back-UPS BI
                Back-UPS CS
                Back-UPS ES
                Back-UPS HI
                Back-UPS HT
                Back-UPS LS
                Back-UPS Office
                Back-UPS Pro
                Back-UPS RS
                Back-UPS XS
                Basic Rack PDU
                Battery Management
                Battery Replacement Services
                Biometric Security
                Bulk Cable
                Cabinet Power Distribution
                Cable Management
                Charge-UPS EX
                Commercial/Industrial Surge Suppression
                Configurable Power Accessories
                Configurable Power Distribution
                Console Port Servers
                Data Center Facility Cooling - Andover Continuum or TAC Vista
                Data Center Facility Power - PowerLogic ION Enterprise
                Data Center Software Integration Kits
                Data Center University
                Data Distribution Cable
                DC Battery
                DC Components
                DC Distribution Components
                Desktop KVM
                Desktop Notebook Stands
                EcoBreeze Air Economizers
                Environmental Management System
                Environmental Monitoring Unit
                Ethernet Switches
                Extended Warranties
                Fiber Optics
                Firmware Upgrades
                FLM Series
                Fluid Coolers
                FRP/Ferroresonant Power Supply
                Game Console Surge Protection
                Gender Changers
                Global Deployment
                Hardwire Surge Suppression Accessories
                High-Density Cooling Enclosures
                IDE Cables
                InfraStruxure for Large Data Centers
                InfraStruxure for Medium Data Centers
                InfraStruxure for Server Rooms
                InfraStruxure for Small Data Centers
                InfraStruxure for Wiring Closets
                InfraStruxure Manager
                InfraStruxure Type A
                InRoom Direct Expansion
                InRow Chilled Water
                InRow Direct Expansion
                InRow Pumped Refrigerant
                Installation Services
                Interface Cables
                International Plug Adapters
                KVM Switches
                Laptop Power Adapters
                Magnum VS
                Magnum XS
                Magnum XS Rectifier
                Maintenance Bypass Panels
                Management Platform Integration
                Matrix Battery Systems
                Matrix-UPS Accessories
                Metered Rack PDU
                Metered-by-Outlet Rack PDU
                MGE Accessories
                MGE Alpes
                MGE Battery Systems
                MGE Comet
                MGE EPS
                MGE EPS 6000
                MGE EPS 7000
                MGE EPS 8000
                MGE Galaxy
                MGE Galaxy 300
                MGE Galaxy 3000
                MGE Galaxy 3500
                MGE Galaxy 4000
                MGE Galaxy 5000
                MGE Galaxy 5500
                MGE Galaxy 6000
                MGE Galaxy 7000
                MGE Galaxy 9000
                MGE Galaxy PW
                MGE Legacy
                MGE Service Bypass
                MGE Sinewave
                MGE Static Transfer Switches
                MGE UPS 4000
                Microsol Estabilizadores
                Microsol Modules Isoladores
                Mobile Notebook Stands
                Modular Components
                Modular Power Accessories
                Modular Power Distribution
                Mounting Hardware
                NetBotz 200
                NetBotz 300
                NetBotz 400
                NetBotz 500
                NetBotz Access Control
                NetBotz Accessories and Cables
                NetBotz Central
                NetBotz Rack Access
                NetBotz Sensors
                NetShelter CX
                NetShelter EP Enclosures
                NetShelter ES Enclosures
                NetShelter Open Frame Rack Accessories
                NetShelter SX
                NetShelter VL
                NetShelter VS Enclosures
                NetShelter VX Enclosures
                Network Integration Services
                Network Patch Cables
                NetworkAIR Accessories
                NetworkAIR AFX
                NetworkAIR CM
                NetworkAIR CW
                NetworkAIR FM
                NetworkAIR IR
                NetworkAIR TC
                Notebook Security
                On Site Service
                Open Frame Racks
                Operations Capacity
                Operations Change
                Operations Energy Cost
                Operations Energy Efficiency
                Operations Insight
                Operations Mobile
                Operations VIZOR
                Outdoor Enclosures
                Panelmount Environmental Monitoring
                Patch Panels
                Planning Tools and Publications
                Portable Cooling
                Power Cords
                Power Distribution Units
                Power Generation Systems
                Power Ready Notebook Cases
                PowerChute Business Edition
                PowerChute Inventory Manager
                PowerChute Network Shutdown
                PowerChute Personal Edition
                PowerChute plus
                Preventive Maintenance
                Project Management Services
                Rack Air Distribution
                Rack Components
                Rack LCD Consoles
                Rack PDU Accessories
                Rack-mount Transfer Switches
                Refrigerant Distribution
                Remote Monitoring Services
                Replacement Batteries
                Replacement Notebook Batteries
                Residential Hardwire Surge Suppression
                Retractable Cables
                Room Air Distribution
                Room Cooling Accessories
                Router Cables
                Row Cooling Accessories
                Security Cameras
                Service Bypass Panel
                Service Plans
                Silcon Accessories
                Silcon Battery Systems
                SLM/FLM Series
                SmartSlot Expansion Chassis
                Smart-UPS Accessories
                Smart-UPS Battery Systems
                Smart-UPS DP
                Smart-UPS On-Line
                Smart-UPS RT
                Smart-UPS VT
                Software Configuration
                Software Education
                Software for NetBotz Appliances
                Software Installation
                Software Integration
                Spare Part Kits
                Specialty Enclosures
                Start-Up Service
                Stationary Power Distribution Units
                Step-Down Transformer
                StruxureWare Central
                StruxureWare Operations Suite
                SurgeArrest Essential
                SurgeArrest Home/Office
                SurgeArrest Notebook
                SurgeArrest Performance
                Switch Boxes
                Switched Rack PDU
                Symmetra Accessories
                Symmetra Battery Systems
                Symmetra MW
                Symmetra MW Accessories
                Symmetra Power Module
                Symmetra PX
                Symmetra PX Accessories
                Sync and Charge Cables
                Thermal Containment
                Thick and Thin Ethernet
                Token Ring
                Toploading Cases
                Traditional Cases
                Training Services
                Travel Mice
                TSP Accessories
                TSP Battery
                TSP/Total System Power
                Tune-UPS for Symmetra
                Uniflair Chilled Water
                Universal Mobile Device Batteries
                Universal Notebook Batteries
                Universal Notebook Power Adapter
                Universal Power Accessories
                Universal Power Adapters
                UPS Network Hub Card
                UPS Network Management Cards
                USB Adapters & Converters
                USB Cables
                USB Charging Cables
                USB Hubs
                Wall-mount Transfer Switches
                Wheeled Cases
                Wizards and Configurators