Frequently Asked Questions
No , can't uses the locking device in ON position.
Yes, A9A27006 is suitable to use on A9S66463
No they don't fit. You will need to replace the old MG MCB with new Acti9 MCB to fit the new Auxiliaries
No, those are designed to fit onto the acti9 AC MCBs for those MCBs use the A9N26929
A9Z51240 = Type B single phase RCCD
A9F54240 = 2 pole, 40A, Curve MCB
A9A26969 = Under voltage release
This video will step you through the detailed procedure of upgrading the firmware on a BMEAHI0812 HART I/O Input module located on a local M580 head rack. The procedure for a BMEAHO0412 HART I/O Output module would be exactly the same..
What is the part number for a 22mm Pushbutton with a blue 24VDC flashing LED?
22mm push button FLUSH type
ZB4BV18B6 (Mounting collar + Blue 24 VDC flashing LED light module)
ZB4BW363 (Push button)
ZBE101 and/or ZBE102 (Contact block)
When trying to connect to the SEPAM using SFT2841 with the mini USB to USB (CCA784) it fails.
Windows computer management
The driver for windows is not get install or cannot find it.
Attached are the work around for the XP and Windows 7 operating systems. If one as Windows 7 or above follow the Windows 7 pdf.