Clipsal Resi MAX Cartridge SPD Imax 20 kA for 920RM/1

Yes ithe cartridges fits the single and three phase surge arrestors.
Some of the key features are:

• Cartridge replacement is quick and easy without the need to disconnect wiring

For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=940PM
 

 The cable length is 900mm

The dimensions for the 4C24FD are 342mm wide, 420mm high and 110mm deep.

For more information, please refer to the link:
https://www.clipsal.com/Trade/Products/ProductDetail?catno=4C24FD 

Cutout for the SBIP2P is 105mm x 105mm
The front plate is 120mm high x 124mm wide.
The enclosure is 62mm deep. The minimum depth is 80mm deep from the surface when mounted in 18mm (minimum) panel thickness. The maximum panel thickness is 38mm.
Please see the attached drawing for more dimensions.

The amount of speakers that can connect to the amplifier (5600BTSA50) is dependent on the wiring configuration, an whether it is wired in series or parallel. The speakers impedance also needs to be taken into consideration. The bluetooth for this device is used specifically for transmitting between devices (i.e. Phone, laptop) not speakers.

Basic specifications for the Bluetooth Amplifier 5600BTSA50 are:

• Input frequency: 2.4GHz
• Installed in roof space
• Bluetooth compatibility: A2DP Bluetooth enabled devices
• Bluetooth system: Bluetooth 2.1 + EDR/Class 1
• Range: up to 15m
• Audio output: 50W RMS per channel at 8Ohms impedance
• Power requirement: 24V, 3.75 amp, DC input (240V power source required)
• Amplifier type: Class D
• Frequency response: 200Hz – 15KHz
• Magnet: 20oz
• Sensitivity: < 90dB
• Weight: 1.3kg
• Dimensions: 130mm x 120mm x 45mm
• PIN code for secure pairing
• Zone personalising for easy pairing with Bluetooth device
• Green technology: smart power efficient amplifier with auto-sensing
ON/OFF

For further information please visit https://www.clipsal.com/Trade/search-results?q=5600btsa50

Or see attached PDF