Quantcast

Conext 160A Battery Fuse Combiner

Conext 160A Battery Fuse Combiner

Conext 160A Battery Fuse Combiner

Item Number: 865-1030-01

Retail
N/A
RRP (Inc. GST)

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Product brand

Clipsal

Others

Package 1 Weight

1400 g

Package 1 Height

14.5 cm

Package 1 width

15.8 cm

Package 1 Length

29.2 cm
Show all specifications

Frequently Asked Questions

hide show

Is the new SCP part number 865-1050-01 compatible with all the XW inverter chargers? (Ex. XW4024, XW6048, XW4548)

865-1050-01 SCP Compatibility
The new part number for the system control panel (SCP) is 865-1050-01.
The XW models had a part number 865-1050 but now the SCP is 865-1050-01 and it is compatible with all XW models.

Customer is requesting the utility interactive current for XWs models

Max Sell Amps

Default - 18Amps (865-1010 XW4024) 36Amps (865-1010-01 XW4024)
                27Amps (865-1000 XW6048) 20Amps (865-1005 XW4548) 48Amps (865-1000-01 XW6048)

Range - 0-18Amps (865-1010 XW4024) 0-36Amps (865-1010-01 XW4024)
                0-27Amps (865-1000 XW6048) 0-20Amps (865-1005 XW4548) 0-48Amps (865-1000-01)

Which metrics will be displayed when using the Conext Battery Monitor?

Issue:
Which metrics will be displayed when using the Conext Battery Monitor?

Product Line:
Conext Battery Monitor

Environment:
Any Schneider Electric solar installation

Cause:
Specific metrics aren't outlined on website

Resolution:
The following metrics will be displayed when using the Conext Battery Monitor:

Battery Current
Battery Temperature
Battery State of Charge
Battery Midpoint 1 Voltage
Battery Midpoint 2 Voltage
Battery Capacity Remaining
Battery Capacity Removed

You can find this and other specifications for the device on our website:
https://solar.schneider-electric.com/product/conext-battery-monitor/

What are the firmware requirements for the new XW+ model

Issue
What firmware is required for older accessories to work with the XW+ models

Environment
Situation where an inverter upgrade is done, such as an RMA/Replacement

Product Line
Conext XW+, SCP, AGS, Combox

Cause
XW+ models require a certain level of firmware to the compatible with the SCP, the AGS, and the Combox.

Resolution
XW+ Model Firmware Requirements

1) The XW+ requires an SCP with fw 2.00bn13. All old SCPs in the US distribution center have been re-programmed and changed to part number 865-1050-01
2) The XW+ requires an AGS with fw 3.00bn2. All old AGSs in the US distribution center have been re-programmed and changed to part number 865-1060-01
3) The XW+ requires a Combox with fw 2.00bn656. All old AGSs in the US distribution center have been re-programmed, but the part number remains 865-1058
4) The old XW / CSW and accessories will run fine with the new AGS / SCP

How many Maximum Power Point Trackers do the Conext Solar Charge Controllers have?

Issue:
How many maximum power point tracking (MPPT) circuits are in each charge controller?

Product Line:
Conext MPPT 80 600 (p/n: 865-1032)
Conext MPPT 60 150 (p/n: 865-1030)

Environment:
PV arrays with multiple strings.

Cause:
Some larger models include multiple separate MPPT circuitry.

Resolution:
The Conext MPPT solar charge controller family only has a single maximum power point tracker in each unit. Multiple strings should be connected in parallel and the MPP will be found as an average across all strings.

The MPPT 60 150 has terminals for convenient connection of two strings without the need for an external combiner box.

The MPPT 80 600 has terminals for connecting up to three strings without an external combiner box (most installations will require external fusing when using more than 2 strings).  See attached image for locations of PV terminals.
 

What is the difference between the old SCP and new SCP (System Control Panel)?

The old SCP (865-1050) is used to configure the original XW and SW inverter charge units, with the addition of newer features implemented by the updated firmware of these units, though the old SCP can only be firmware
 upgraded so far to the point where it could not configure a good deal of the new features.
The new SCP (865-1050-01) has all the same programming capabilities as the old SCP but also includes the ability to program the new features included with the updated firmware found on the XW and SW inverter charge units.

It is advised that if you have the old model SCP, to replace it with the new SCP.
Show More