blank module standard
Used for collateral, as web image
blank module standard
Used for collateral, as web image

Blanking Module, S2, Standard

Catalogue Number: 80MB
blank module standard
Used for collateral, as web image
blank module standard
Used for collateral, as web image
Colour: White Electric
Colour: Per UOM Std.
  • Black 1 PCE
  • White Electric 1 PCE

Specifications

hide show
Range of product
  • PDL
  • 800 Modena Series
    • Product brand
      Clipsal
      Product or component type
      blank module
      EU RoHS Directive
      Compliant

      Documents & downloads

      hide show
      Filter items
      • All

      • Product Brochures

      • CAD Files and Packs

      • Technical Data Catalogues

      • Installation Instruction

      • Specifications

      • Certificates (MSDS)

      Frequently Asked Questions

      hide show

      Is part no 80ML available marked Fan ?

      Part no 80ML is not marked Fan

      Is 80mm corrugated conduit available?

      Unfortunately. There is no 80mm corrugated available.

      What is part number for 80mm galvanised saddle?

      The part number for 80mm galvanized saddle is the part number is 178/80PP.

      What is the part number for a VGA outlet and plate for the Modena series?

      The part number for a VGA outlet and plate for the Modena series is - 80MVGA , 80MB & M8080H

      For further information , visit links below:-
      https://www.clipsal.com/Trade/search-results?q=80MVGA
      https://www.clipsal.com/Trade/search-results?q=80MB
      https://www.clipsal.com/Trade/search-results?q=M8080H
      User-added image
      User-added image
      User-added image

      What is the part number for a cap for 80mm pressure pipe?

      The part number for a cap for 80mm pressure pipe is - 262P80

      For further information , visit link below:-
      https://www.clipsal.com/Trade/search-results?q=262P80
      User-added image

      What is the part number for the EM4880 5A to 80mA CT converter?

      Issue
      A user would like to purchase a converter to convert 5A CT to 80mA current inputs for EM4xxxx meters

      Product Line
      Current transformers 

      Environment
      EM4xxx

      Resolution

      The 5A:80mA converter is useful in applications where there are existing 5A CT's integrated into large motors or switch gear. The 5A:80mA converter matches the 5A secondary of the load to the 80mA input of the meter. In Billing Grade applications, the 5A:80mA converter is also used to connect regulatory grade large aperture, large amperage CT's with 5A secondary to the 80mA of PowerLogic 4X80 meters.

      The EM4xxx 5A to 80mA CT converter is available in Canada and the part number is: 900-319-01-A00

      The EM4xxx 5A to 80mA CT converter is now available in the US and the part number is: METSECONV580


      Legacy KB System (APS) Data: RESL210195 V1.0, Originally authored by MaTh on 01/03/2013
      Related ranges: EM4800

      Need a stainless steel metal enclosure for an emergency stop 80 x 80 x 80mm

       None available in that size and material 

      What is the total depth of the SBIP Clipsal Pop up sockets ?

      80mm Deep when closed,
      100mm deep when opened.
      See drawing attached.

      Do Modena switches come with out LED

      All come with LED , ( Except the 80MH) but you do not need to connect the LED  if you do not want the LED indicator.

      For more information on this product range please visit the Clipsal web site on the supplied link https://www.clipsal.com/Trade/search-results?q=80m

      What is the part number for a 80mm x 50mm service column?

      The part number for a 80mm x 50mm service column is MSC80503N.
      However this part is being phased out and replaced with the new Optiline 70 series.

      For more information, visit the website at www.clipsal.com/Trade/search-results and click on the link to view a brochure.

      Does the 8MB memory card BMXRWSB008M for the BMXNOE0100 have a Graphical Editor in its default web pages?

      No. The 8MB memory card only has a Data Editor. To get a Graphical Editor you will need to use the 16MB card BMXRWSC016M.


      What is the size of the base of XVBZ02

      Issue:
      What is the size of the base of XVBZ02 

      Product Line:
      XVB

      Environment:
      Stack/Tower Lights

      Resolution:
      Base Unit 80mm (3.15in)

      What is the part number for a Strato switch plate with 2 switch mechs and a dimmer?

      The part numbers for a Strato switch plate with 2 switch mechs and a dimmer are -  S8080H , 80ML & 80E450UDM

      For furter information , visit links below:-
      https://www.clipsal.com/Trade/search-results?q=S8080H
      https://www.clipsal.com/Trade/search-results?q=80ML
      https://www.clipsal.com/Trade/search-results?q=80E450UDM
      User-added image

      User-added image
      User-added image

      What are the dimensions and Cut out for the pop up outlet SBIP2P?

      The dimensions and Cut out for the pop up outlet SBIP2P are:

      Dimensions:
      • 119mm (L) X 124mm (W) X 80mm (D)

      Cut out:
      • 105mm (L) X 105mm (W) X 80mm (D)

      Some of the key features are:
      • Pop-up outlet
      • 10A Rated
      • 250V
      • Auto Switched
      • Various colours available
      For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=SBIP2P


      User-added image
       

      What are the dimensions for the 43VF15?

      The dimensions for the 435VF15 are 118mm high, 80mm wide and 65mm deep.
      It has a cut-out diameter of 66mm and the mounting centres are 70mm x 54mm.

      For more information, please refer to the link:
      https://www.clipsal.com/Trade/Products/ProductDetail?catno=435VF15

      How quickly will the HS Power Meter Module fill the on board memory of an ION 7550/7650 meter?

      The calculation in this article shows how much time it would take for a High Speed (HS) Power Meter Module to fill 10MB on-board memory of ION 7550/7560. HS Power Meter Module updates their measurement as fast as once per half cycle (rather than once per second) or twice in every cycle.
      The assumptions made are as follows:


      • 1. On board memory size is 10MB

        2. Using firmware version 360 or later for the meter

        3. The meter has only one data recorder module with six inputs (3 phase voltage, 3 phase current)

        4. No waveform recorder module or event log controller module is in use

        5. The HS Power Meter Module is updating twice in every cycle

        •  

          If we are working on a 60 Hz system, then there will be 120 updates in one second.

           

          Each phase voltage or phase current data takes 5 byte of space and each time stamp takes 8 byte of space.

          That is, each update will be 38 byte long (=6X5 byte+8 byte). This 38 byte of memory will be called log.

          The total on board memory is 10 MB or 10485760 byte (1MB= 1024 KB, 1 KB= 1024 byte).

          Therefore, the on board memory can hold 275941.0526 logs.

          In one second there are 120 logs which will fill the entire memory in 2299.508 seconds or in .63875 hour or 38.32500 minute.

          Due to this tremendous rate, HS Power Meter Module is only used for recording sub-second events (for example transients) over a very brief period.


      Legacy KB System (APS) Data: RESL206997 V1.0, Originally authored by MaTh on 12/28/2011, Last Edited by MaTh on 12/28/2011
      Related ranges: ION7550/ION7650

      Do you do a 15A version of the pop up outlet SBIP2P?

      No unfortunately there is only the 10A version. 
      Some of the key features are:
      • Pop-up outlet
      • 10A Rated
      • 250V
      • Auto Switched
      • Various colours available
      • Cutout size 105mm (L) X 105mm (W) X 80mm (D)
      For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=SBIP2P


      User-added image

      What is the part number of the S2, standard sized mechanism to suit the Strato or Modena range?

      80ML is rocker switch module, size S2 - 1 way / 2 way with Blue LED to suit the Strato or Modena range.
      Key Features:
      • Rocker switches with 16A rating for resistive and 16AX rating for inductive/capacitive loads.
      • Terminal size maximised for ease of use.
      • Fully shrouded and clearly marked terminals for faster installation.

      Below is the configuration in S6 sized Grid plate

      For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=80ML

      How do I wire a 80MIL in a 3 way intermediate switching application?

      Please see the attached document for Wiring Configuration for 80MIL in a 3 way intermediate switching application in the Modena/ Strato Series.

      Some of the key features are:
      • Blue LED
      • Terminals accommodates 4 x 1.5 sq mm cables each
      • Intermediate/ Double Pole mechanism
      • Front loading rocker switches
      • 250V AC
      • 10AX
      • Available in various colours
      • 80 Series (To suit Strato, Modena)
      For further information please visit www.clipsal.com/Trade/Products/ProductDetail?catno=80MIL


       

      Is it possible to access the files on a Modicon M340 8mb or 16mb memory card with a Linux PC or a MAC?

      Title
      M340 SD Card file access
       
      Issue
      File access on SD Card for M340 CPU
       
      Product Line
      M340
       
      Environment
      Unity Pro
       
      Resolution
      No, Only Window based operating system can access the M340 memory card.


      Why are 9001KM38 listed twice, as resistor and full voltage light modules?

      Issue:
      Is the 9001KM38 a resistor type or full voltage type of light module?

      Product Line:
      Harmony Pushbuttons

      Environment:
      All Products

      Cause:
      Product Features

      Resolution:
      Both descriptions are accurate. They are both the same device but can be selected by either description depending on the application/preference.

      Data Purge Rules and Limits for NetBotz 500

      Issue:

      Data Purge Rules and Limits for NetBotz 500

      Product Line:

      NetBotz

      Environment:

      NetBotz 500 NBWL0500

      Cause:

      Storage Space and Purge specifications.

      Resolution:

      Appliance Storage Space and Purge Specifications:

      - 128MB of RAM

      - 60MB is used by the operating system and applications

      - 68MB RAM Disk is available for non-persistent storage for:
      - Alerts
      - Historical sensor readings
      - Pictures (for alerts)
      - Audio tracks (for alerts)
      - Stored data will be kept no longer than 24 hours

      - Data purge rules:
      - If RAM Disk is full, then oldest data will be deleted to make room for new data
      - When age of data reaches 24 hours
      - No more than 200 items of any type will be kept (sensor readings, pictures, audio tracks, etc..)

      What is the maximum wire length for digital inputs and outputs on Powerlogic meters?

      Issue
      Customer would like to determine the maximum distance between a meter and a digital input source or an output signal receiver 

      Product Line
      ION and Powerlogic meters with digital I/O options

      Resolution
      There is no absolute maximum distance of I/O wiring and actual length depends on several factors including:
      • The field voltage source
      • Wire AWG and manufacture specs
      • Wire type
      • Electrical noise and environment 
      • Meter specs 
      * The calculations below are meant to be a rough estimation and they are not accurate unless all the factors are considered *

      Digital Input Example:

      The PM800 equipped with a PM8M2222 Digital I/O extender with field source of 120 Vac. The wire to be used is a 16 AWG with a resistance of 4.016 ohm per 1000 feet. The PM800's digital input's turn on voltage is 20 Volts and the maximum current draw is 2 mA.

      Vdrop= Current X R (per1000 feet) *2*length
      Vinput= Vsource - Vdrop

      The Vinput needs to exceed the turn on voltage in order for the meter to recognize the signal. In this example, the theoretical maximum would be in the hundreds of thousands of feet. Needless to say, noise as well as other factors will affect the quality of the signal and practically limiting the cable run.

      Digital Output Example

      A similar calculation can be established for digital outputs once the specifications are known. For example, the ION 7650 has a maximum load of 3 A @ 380 VAC, hence the rated burden is 126.666 ohm. The total loop resistance should be less than the rated burden.  A 16 AWG wire has a resistance of 4.016 ohms per 1000 feet and the maximum theoretical distance that would sustain current without significant voltage drop would be 31,500 feet. Moreover, Form A digital output have a similar calculation given the maximum load voltage and current as well as the input source. For example, if the turn on is 20 volts on a PLC and the ION 7650's form A relay is rated at 80mA @ 30 VDC then :
      Vdrop= Current X R (per1000 feet) *2*length
      Vinput= Vsource - Vdrop
      The theoretical maximum attainable distance would be around 15,600 feet for a 16 AWG wire originating from the ION7650's I/O output.
       

      What ION7550/ION7650 firmware downloads are available and what changed?

      Issue
      Where can I download ION7550/ION7650 firmware and what was updated?

      Product Line
      ION7550/ION7650

      Environment
      Firmware Download Links

      Resolution
      The table below lists the current and past firmware versions with associated download and What's New? document links:
      Firmware Version ION7650 Firmware* ION7550 Firmware* What's New? Document Notes Release Date
      V411 Download Download See Below Only compatible with -05 hardware July 2018
      V410 Download Download Details Only compatible with -05 hardware March 2017
      V401 Download Not Available Details Only compatible with -05 hardware March 2016
      V400 Download Not Available Details Only compatible with -05 hardware Feb 2015
      V375 Download Download See Below Use for -04 and older hardware July 2018
      V374 Download Not Available Details   March 2016
      V373 Download Download Details   Dec 2014
      V371 Download Download See Below   June 2012
      V366 Download Download See Below   Feb 2012
      V360 Not Available Download Details    
      V355 Not Available Not Available Details    
      V350 Not Available Not Available Details    
      V331 Not Available Not Available See Below    
      V330 Not Available Not Available Details    
      V321 Not Available Not Available Details    

      *Older versions with 'Not Available' status may be requested from Technical Support if required.

      Additional descriptions for firmware versions are as follows:


      V411/375
      No new features.
       
      V410​
      This firmware release supports EN50160:2010 (Edition 4) and IEC 61000 4-30 Edition 3. EN50160 is a European standard that defines the voltage characteristics of the electricity supplied by public distribution systems. The latest firmware version for this meter now supports the EN50160:2010 (Edition 4) standard. The IEC 61000-4-30 (4-30) standard defines methods for measurement and interpretation of power quality parameters in 50/60 Hz AC power supply systems. The standard describes measurement methods for relevant parameters to obtain reliable, repeatable and comparable results using any compliant meter. 
       
      V400 
      V400 is a general firmware release that adds support for new metering hardware. In addition this firmware release reduces the 7x50e and 7x50s variants into one allowing for IEC61850 and10Meg of logging memory to occur upon the same device. V400 adds compatibility for the -05 hardware revision option. This can be found as the last two digits of a meters serial number. V400 will NOT be compatible with previous versions of hardware ( -04 or earlier). In addition previous firmware revisions (pre V400) will not be compatible with the -05 hardware. We have consolidated the e (IEC61850) and s (standard) variants into one release. This means ALL devices ordered with V400 will now contain IEC61850 functionality as well as contain the 10M logging memory. Both features can be implemented in frameworks simultaneously. NOTE: To support the new features in v400, download the latest version of ION Setup from the website. 
       
      V401/374
      *The V374s version is the standard version. *The V374e version is for IEC61850 protocol support. This firmware is for the older hardware platform (RevA, if you like). The equivalent firmware for the RevB hardware platform is V401.
       
      V373​
      Firmware V373 is a general firmware release that adds support for the following features: (1) Access to more voltage data (2) Enhanced interharmonic distortion calculation (3) Display module enhancements (4) initial release of the PowerLogic Remote Display and also includes security enhancements. NOTE: For more detailed information about any of these features, please find the document entitled "What’s new in ION7550/ION7650 v373" (7EN12-0276-00). In preparation for upgrading your meter's firmware please download the latest firmware version (.upg file) and the appropriate Meter Template (.dcf file). Note that releases of Meter Template files often do not keep pace with firmware releases so do not be concerned if the firmware version number in the label of latest available template file is not as high as the version number of the firmware file. The main thing is to get the latest available file for each of firmware and template. ION Setup (freeware utility) is the recommended tool for the firmware upgrade process. See the Upgrading ION Device Firmware technical note for complete details.
      Important Notes: *Generally, two versions of firmware are available for the ION7x50 devices: VXXXe with IEC 61850 implementation, and; VXXXs without IEC 61850 implementation. *IEC61850 is supported with the consequence of a reduction of the available logging memory. If you upgrade a 10MB meter to use IEC 61850 firmware, the meter’s logging memory will be reduced to 5MB. If the meter is subsequently loaded with non-IEC 61850 firmware, the meter’s original logging memory will be restored.  

       
      V371​
      Firmware V371 is a general firmware release that adds support for the initial release of the PowerLogic Remote Display and also includes security enhancements. In preparation for upgrading your meter's firmware please download the latest firmware version (.upg file) and the appropriate Meter Template (.dcf file). ION Setup (freeware utility) is the recommended tool for the firmware upgrade process. See the Upgrading ION Device Firmware technical note for complete details.
      Important Notes: *Two versions of firmware are available below namely: V371e with IEC 61850 implementation, and;V371s without IEC 61850 implementation. *IEC61850 is supported with the consequence of a reduction of the available logging memory. If you upgrade a 10MB meter to use IEC 61850 firmware (7650V360e), the meter’s logging memory will be reduced to 5MB. If the meter is subsequently loaded with non-IEC 61850 firmware (7650V360s), the meter’s original logging memory will be restored. 
       
      V366
      Firmware version 366 (V366) for the ION7x50 adds Modbus mastering over TCP support for up to 10 connections. This is in addition to the 8 available Ethernet connections and is also in addition to the Modbus master functionality in both serial ports. This release also includes various communications bug fixes. When upgrading your meter's firmware please download the latest firmware version (.upg file) and the equivalent Meter Template (.dcf file). You can upgrade meter firmware using ION Setup or ION Enterprise. See the Upgrading ION Device Firmware technical note for complete details
      Important Notes from V360 (applicable to V366): * Two versions of V360 firmware are available below: with IEC 61850 implementation (7x50V360e) and without IEC 61850 implementation (7x50V360s). * IEC 61850 can only be purchased on 5MB meters, not 10MB meters. If you upgrade a 10MB meter to use IEC 61850 firmware (7x50V360e), the meter’s logging memory will be reduced to 5MB. If the meter is subsequently loaded with non-IEC 61850 firmware (7x50V360s), the meter’s original logging memory will be restored.* The non IEC 61850 firmware version (7x50V360s) still has new features available, such as COMTRADE waveform recording.* To find ICD files related to the IEC61850 implementation on ION7x50 meters, search the keyword icd on any schneider-electric.xxx site 
       
      V360
      Firmware version 360 (v360) for the ION7550/ION7650 adds IEC 61850 server functionality. This includes FTP support and the ability to save waveform data in COMTRADE format.
       
      V355
      Firmware version 355 (v355) and factory template 7550/7650_v355_FACPQ_V3.4.0.0.0 for the ION7550 / ION7650 adds International Electrotechnical Commission (IEC) 61000-4-30 Class A Edition 2 standard compliance for the ION7550 / ION7650 and the ability to configure the event priority value for digital input state change events.
       
      V350
      Firmware version 350 (v350) for the ION7550 / ION7650 adds a number of new features as well as support for the new Communications Card.
      New features
      • Disturbance Direction Detection capabilities are now available.
      • Localization options have been added to the meter, including:
        • the ability to set the language of the front panel display to English, Spanish, French or Russian.
        • the option to customized IEEE/IEC convention settings.
      • Setpoint learning functionality has been added. 
      • The meter can function as a Modbus gateway, forwarding Modbus packets from a master through the meter to downstream serial devices.
      • Trending and Forecasting functionality has been added.
      • The meter can now communicate selected values over the Ethernet via SNMP.
      • Support for a new communications card has been added.
      • A default IP Address has been added. For more information on these features, see the relevant sections in this document.
      Other changes
      • Power Availability has been removed from the default template.
      • V4, I4, I5 waveform recorders have been removed from the default template.
      • Thermal Demand has been removed from the default template.
       
      V331​
      Firmware version 331 (v331) for the ION7550/ION7650 meter improves Class A compliance with the IEC 61000-4-30 (2003 - 1st Edition), or “4-30” power quality standard. Compliance improvements included are Class A Flicker with no exceptions
       
      V330
      Firmware version 330 (v330) for the ION7550 / ION7650 meter supports Class A compliance with the IEC 61000‐4‐30 (2003 ‐ 1st Edition), or “4‐30” power quality standard.
       
      V321
      Firmware version 321 features enhanced Modbus Mastering with four ION modules new to the ION 7550 /ION 7650 platform. The Modbus Master Device and Modbus Master Mapping modules work together to offer improved setup of Modbus read functionality. The Averaging module provides simple averaging and easily links with other Modbus modules. The Modbus Master Options module allows multiple serial connections to different loops of Modbus devices.
      Advanced meter security provides an additional layer of security, allowing you to configure up to 16 users, each with unique access rights to the meter. Access rights consist of different security levels, permitting different users to read values, perform resets, time sync the meter clock, or configure meter settings.

      M340 Troubleshooting Guide

      Goals and Symptoms

      How to interpret the front panel lights when diagnosing problems with the M340.

      Causes and Fixes

      Modicon M340 Processor Troubleshooting


      • The Modicon M340 Programmable Automation Controller is a Mid-range automation system providing small size, yet powerful 32-bit processor for demanding OEM machine and industrial process applications. It is programmed using our cross-platform IEC 61131-3 application development software, Unity Pro (v3.0 or higher). The front panel has a series of LEDs that indicate the status of the M340 processor, SD Memory Card, and system communications.

        The Modicon M340 is available in the following models.

         

        M340 Processors


        BMXP341000 Standard Level 1, 2MB RAM, USB port,

                  • 1-communication port: ModBus/Serial, includes 8MB memory card
        BMXP342000 Advanced Level 2 (Performance) for Modicon M340 PLC
              • 1 USB Port for programming
                1 slot for a memory SD-card
                1 communication port: serial link
                Shipped with 1 standard memory SD-card

        BMXP342010 Advanced Level 2, 4MB RAM, USB port,
                  • 2-communication ports: ModBus/Serial and CANopen master includes 8MB memory card.

        BMXP342020 Advanced Level 2, 4MB RAM, USB port,
                  • 2-communication ports: ModBus/Serial and Ethernet-ModBus/TCP, includes 8MB memory card

        BMXP342030 Advanced Level 2, 4MB RAM, USB port,
                  • 2-communication ports: Ethernet-ModBus/TCP and CANopen master includes 8MB memory card.
         

        Processor Status Displays

        Introduction

        There are several LEDs available on the front panel of each processor, enabling
        rapid diagnosis of the PLC status.

        These LEDs provide information on:


        · PLC functional status
        · The memory card status
        · Communication with the I/O modules
        · Modbus Serial communication
        · Communication on the CANopen network
        · Communication on the Ethernet network

        Illustration

        The following diagrams shows the physical location of the LEDs on the front panel of the BMX P34 processors:

        BMX P34 1000/2000 Processors LEDs

            •  
        BMX P34 2020, BMX 2030/20302 Processors

        Table 1 M340 Processor Status and Error indicator display



         

        Display differences between version 1 and version 2 of the

        BMX P34 20x0x module.



        Searching for Errors Using the Processor Status LEDs

        General

        The status LEDs located on the processor inform the user of the PLCs operating
        mode and any possible errors.
        The errors detected by the PLC concern:

        · circuits which constitute the PLC and/or its modules: internal errors
        · the process driven by the PLC or the process wiring: external errors
        · functioning of the application executed by the PLC: internal or external errors

         

        Error Detection

        Error detection is performed at startup (autotest) or during operation (which is the
        case for most equipment errors), during exchanges with the modules, or during
        execution of a program instruction.
        Certain "serious" errors require the PLC to be restarted while others are left to the
        user to decide how to proceed depending on the level of application required.
        There are three types of error:

        · non-blocking
        · blocking
        · processor or system

        Blocking Errors

        General

        Blocking errors, caused by the application program, do not cause system errors but
        prohibit execution of the program. When such an error occurs, the PLC stops
        immediately and goes into HALT mode (all tasks are stopped on the current
        instruction). The ERR LED flashes.

        Restarting of the Application After a Blocking Error
        To end this status it is necessary to init the PLC or to set the %S0 bit to 1.
        The application is then in an initial state:
        · The data resumes its initial value.
        · Tasks are stopped at end of cycle.
        · The input image is refreshed.
        · Outputs are controlled in fallback position.
        ·
        The RUN command then allows the application to be restarted.

        Blocking Error Diagnosis
        Indication of a blocking error is signaled by the ERR and RUN LEDs flashing on the
        processor front panel.
        The system words %SW126 and %SW127 indicate the address of the instruction
        which caused the blocking error.
        The nature of the error is indicated by the system word %SW125.
        The following table presents the errors signaled by the values of the system word
        %SW125.
         

        M340 Diagnostic information Memory card

        Memory Card Description

        Only Schneider memory cards are compatible with BMX P34 processors.
        Schneider memory cards use Flash technology and do not require a battery. These
        cards can support about 100,000 write/delete cycles (typical).

        The Memory card access LED is located behind the Memory Card Protective Cover.

         


        CANopen Diagnostics

         

        BMX NOM 0200 Module Status Display

        LED Indications


         

        BMX NOE 01x0 Module


        Ethernet LED






        Display differences between Version 1 and version 2 of the BMX NOE 01x0 module.



         


      Legacy KB System (APS) Data: RESL200598 V1.0, Originally authored by MiOB on 11/26/2009, Last Edited by MiOB on 11/26/2009
      Related ranges: Modicon M340.