Quantcast

Clipsal - Smoke Alarms, Smoke Alarm Surface without Base ,for 240V

Clipsal - Smoke Alarms, Smoke Alarm Surface without Base ,for 240V

Clipsal - Smoke Alarms, Smoke Alarm Surface without Base ,for 240V

Item Number: 755RFB

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Range

Clipsal

Product brand

Clipsal

Physical

EU RoHS Directive

Under investigation

Environmental Disclosure

ENVPEP1907002EN

Circularity Profile

ENVEOLI1907002EN

Others

Package 1 Bare Product Quantity

1

Unit Type of Package 1

PCE

Number of Units in Package 1

1

Package 1 Height

14.5 cm

Package 1 Width

3.3 cm

Package 1 Length

14.5 cm

Package 1 Weight

185 g
Show all specifications

Frequently Asked Questions

hide show

Can the Wiser smoke alarm interconnect with my existing alarms?

The Wiser Smoke alarm (CLP599WSAL) has 433MHz RF and Zigbee 3.0 tech included, meaning they are compatible with Clipsal Fire Tek® Wireless smoke alarms 755LPSMA4 and 755RFB2 bases to allow simple upgrade opportunities
Wiser Smoke Alarm
 

VIDEO - How to Interconnect 2 755RFB2 Smoke Alarm Bases & a 755PSMA4 Smoke Alarm?

This video demonstrates the pairing techniques used to interconnect two wireless base smoke alarms.
►Learn More: https://www.clipsal.com

VIDEO - How to Test Interconnection of 755RFB2 Base with 755PSMA4 Smoke Alarm?

This video demonstrates the techniques used in testing the interconnect of the wireless 755RFB2 base.
►Learn More: https://www.clipsal.com


How do I delete the pairing on a 755RFB2 Smoke Alarm Mounting Base with Wireless Interconnect ?

Follow the steps below to delete the pairing on 755RFB2,
  • Make sure all bases are powered ON in normal mode.
  • Press RF button 3 times in 2 seconds on the unit. RF LED will light on.
  • Press and hold RF button for at least 4 seconds, RF LED will flash 5 times to confirm the success.
Wireless interconnection pairing - 755RFB2.png

How do you Interconnect a 755RFB2 smoke alarm bases with a 755LPSMA4 smoke alarm?

See the below "How to video".

The part number for the products seen in this video is a 755RFB2 base and a 755LPSMA4 smoke alarm.

For further information please visit 
Smoke alarm: https://www.clipsal.com/products/detail?CatNo=755LPSMA4&tab-document-1=1
Wireless base: https://www.clipsal.com/products/detail?CatNo=755RFB2&tab-document-1=1

How do I test a smoke alarm installed on a 755RFB mounting base?

TEST FUNCTION (WHEN NO SMOKE IS PRESENT)

  1. Test the LOCAL smoke alarm:

    Press and hold either the Remote Test button or the Local Test / Hush button and release within 4 seconds. Only the local smoke alarm will sound.

  2. Test the LINKED smoke alarms:

    Press and hold either the Remote Test button or the Local Test / Hush button for more than 5 seconds. The linked alarms will sound.

Note for wireless interconnection

After 5 seconds, a signal of 15 seconds duration is sent to all units. When the wireless linked smoke alarms detect the signal, they will sound until the signal is no longer transmitted.The wireless detection interval is 10 seconds.

Important: After the Test / Hush button has been pressed, wait 10 minutes before any additional testing is conducted to avoid any false alarm responses as product has reduced sensitivity during this period.

Read more about the 755RFB smoke alarm surface.

Download Installation Instructions for the 755RFB. (PDF 1.1MB.)

Important: After the Test / Hush button has been pressed, wait 10 minutes before any additional testing is conducted to avoid any false alarm responses as product has reduced sensitivity during this period.

Read more about the 755RFB smoke alarm surface.

Download Installation Instructions (PDF 1.1MB) for the 755RFB.

Show More