PIR Sensor, Master, 360deg, Dual DALI Output, Remote Control Option

PIR Sensor, Master, 360deg, Dual DALI Output, Remote Control Option

PIR Sensor, Master, 360deg, Dual DALI Output, Remote Control Option

Item Number: 752DALIRC

Retail
$499.63
RRP (Inc. GST)

Datasheet

Barcode

Qty UoM EAN Colour
-
-
-

Specifications

Design

Range of product

ARGUS standard movement detector

Range

ARGUS

Product or component type

presence detector with IR receiver

Colour tint

white

Physical

Communication port protocol

DALI

Number of channels

2

Type of setting

pre-programmed time

Control type

movement sensor

Function available

  • override switches
  • master function
  • switching, toggling, dimming
  • constant light control
    • Light intensity adjustment

      10-2000 lux

      Device mounting

    • surface
    • flush
      • Mounting height

        2.5-2.5 m

        IP degree of protection

        IP20

        EU RoHS Directive

        Compliant

        Mercury free

        Yes

        RoHS exemption information

        Yes

        China RoHS Regulation

        Product out of China RoHS scope. Substance declaration for your information

        Environmental Disclosure

        ENVPEP120102EN

        Others

        Network frequency

        50/60 Hz

        Input function

        switch

        Horizontal detection angle

        360-360 °

        Detection face

        radius: 4000 mm

        Package 1 Weight

        108.7 g

        Package 1 Height

        125 mm

        Package 1 width

        105 mm

        Package 1 Length

        125 mm

        WEEE

        The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
        Show all specifications

        Frequently Asked Questions

        hide show

        What is the replacement to the 752/225CUI?

        752/CD1RC or 752/CD2RC if two circuits need to be controlled

        What is the replacement sensor for the 752/225CUI??

        752/CD1RC

        Is part number 752/CD1RC suitable for 8 amp LED load?

        No - Part number 752/CD1RC is suitable for LED loads up to 4 amps.

        How many 752/CD2RC Sensors can be interconnected?

        There is no limitation for how many sensors can be interconnected.

        Does the 752/CD1RC include the bases?

        Yes, it includes both the base for surface mounting and flush mounting.

        Is there a dual load sensor?

        Yes, the part number is 752/CD2RC

        What is the time range for the 752/CD1RC?

        The time range for the 752/CD1RC is - 5seconds to 30minutes
        For further information , visit link below:-
        https://www.clipsal.com/Trade/search-results?q=752/CD1RC
        User-added image

        Can the 752/CD2RC do pulse output?

        From the installation brochure

        Output 1 (for lighting loads, connected to terminals L’ and N)
        This output operates in exactly the same way as the output in the single-load
        sensor unit and switches the connected load when:
        • Motion is detected by the user-selected combination of PIR and Ultrasonic
        sensors.
        • The ambient light level is below the set light level adjustment.
        Output 1 uses TIME 1 adjustment to set the switch-off time delay. The time
        adjustment can be set for delays from 5sec to 30min. The 1sec Pulse and Test
        settings are used during setup
        . Refer to Setup and Operation.

        Only if left in test mode

        https://updates.clipsal.com/ClipsalOnline/Files/Brochures/W0001639.pdf

        What is the part number for a dual tech occupancy sensor?

        The part number for a dual tech occupancy sensor is - 752/CD1RC

        752/CD1RC REPLACES 752/135U, 752/225CU AND 752/225CUI

         


        For further information , visit link below:-
        https://www.clipsal.com/Trade/search-results?q=752/CD1RC
        User-added image