Frequently Asked Questions
There is no offer for a 3 position double pole rotary mech in 600 series.
Only the single pole PDL687M3WH which is 3 position, single pole.
No. All the 3 and 4 position rotary switches available in the 600 series have engraving.
The 600 series rotary mechs (687M3 etc) will be fine with a 56MO500/1 as the switch location is in the center.
However we would not recommend this with the 56MO500/2 as the switches are off center there will be conflict between the rotary knob and the gasket on the hinged flap when the switch is in certain positions which will rotate the switch knob slightly.
There is no complete 800 series mech but it can be made using the following two part codes: