683M

Cover Brushed Bronze

Catalogue Number: 683M
683M
Retail
$12.86
RRP (Inc. GST)
Colour Polished Brass (PB)
  • Polished Brass 1 PCE
  • Bronze 1 PCE
  • Stainless Steel 1 PCE

Specifications

hide show
Range of product
PDL 600 Designer Series
Product brand
Clipsal
Product destination
switch
Material
metal
Surface finish
matt
Package 1 Weight
0.022 kg

Frequently Asked Questions

hide show

Is the 683 waterproof switches available with press mechs

No, not available

What are the dimensions of the PS100CO?

The dimensions are 105mm (H) X 68mm (W) X 63mm (D).

What is the dimensions for a PDL 683 3-Gang Switch ?

Overall Dimensions: 118mm x 74mm
Mounting Centres: 84mm

What is the part number for a PDL single gang grid and cover?

The part number for a PDL single gang grid and cover is a 681VH.
Some of the key features are:
  • Standard
  • also suitable for a 681M metal cover plate
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=681VH​

What is the XD2AC221?

Issue:
What is the XD2AC221?

Product Line:
Harmony Pushbuttons

Environment:
All Products

Cause:
Product Features

Resolution:
It is a 30mm joystick., a 2 direction with spring return to 0 with a 68mm long lever.

 

What is the part number for a PDL 2 gang switch grid and cover?

The part number for a PDL 2 gang switch grid and cover is PDL682VH.

Some of the key features are:
  • Standard size
  • For 682M metal cover plate
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=682VH



 

Can the Altivar 58 unit use the same dynamic resistors as the ATV66, ATV16 and ATV18?

Issue: Can the Altivar 58 unit use the same dynamic resistors as the ATV66, ATV16 and ATV18?
 
Product Line: ATV58
 
Environment: All
 
Cause: N/A
 
Resolution: Yes. Actual DB resistor used depends on the application. The installation guide for the drive shows the minimum Ohms value to be used. The wattage or continuous current rating of the resistor depends on mechanical considerations.
The optional parts list shows the same DB resistor part numbers for the ATV58 as used with the ATV66.


 

What is the ERR7 fault on Altivar ATV58 keypad display?

Issue:   
What is the ERR7 fault on Altivar ATV58 keypad display?
 
Product Line:   
ATV58
 
Environment:  
All
 
Cause:  
ERR7
 
Resolution:   
Probable Causes:
Serial link time out error. The keypad display is not getting a response from the drive controller. If the keypad display is remotely mounted, electrical noise may be present. The port baud rate (tbr) may be set to 9600 bits/s.
Corrective Actions:
Cycle power on the drive controller. If the keypad display is remotely mounted, verify that the cable is properly shielded. Ensure that the cable is routed away from motor leads. See below menu 4 control for instructions for resetting the tbr parameter back to 19200 bits/s. If the problem persists, replace the control board on the drive controller with part number VX4A581U. An Ini fault may be displayed if the problem persists.





 

What size are the cable ports on the NetShelter CX, and how many are there?

Issue:
Cables need to enter and exit the cabinet. 

Product Line:
NetShelter CX2

Environment:
All versions and serial ranges.

Cause:
Knowing the dimension of the cable port allows a person to calculate how many cables can fit through the opening. 

Resolution:

AR4000MV: two ports, 30mm x 95mm at the botton and 26mm x 68mm at the top. 

AR4018A/AR4018IA: one port, 350mm x 120mm at the bottom. 

AR4024A/AR4024IA: one port, 350mm x 120mm at the bottom. 
AR4038A/AR4038IA: two ports, 350mm x 120mm, one at the top and one at the bottom.