Mod-Black Push Button

Mod-Black Push Button

Mod-Black Push Button

Item Number: 681M16PBS-WH

Retail
N/A
RRP (Inc. GST)
Colour White (WH)
  • White 1 PCE
  • Black 1 PCE
  • Green 1 PCE
  • Red 1 PCE

Datasheet

Specifications

Design

Range of product

  • 600 Designer Series
  • PDL
    • Product or component type

      push-button

      Product brand

      Clipsal

      Physical

      Device presentation

      basic element with full cover plate

      Actuator

      push-button

      Local signalling

      without light indicator

      [Ue] rated operational voltage

      250 V AC

      Inrush current

      16 A

      IP degree of protection

      IP40

      Others

      Contacts type and composition

    • 1 NO for contacts close
    • 1 NC for contacts open
      • Package 1 Weight

        0.017 kg
        Show all specifications

        Frequently Asked Questions

        hide show

        What is the part number for the 681m16pbs in black module with surround

        PDL681M16PBSBKBK

        Can a PDL 681MT10PB do 2 way switching

        Yes it can

        What colour LED lamp is in a 681MT10PB Amber or blue

        The LED colour is Blue

        What is the part code for the 600 Series blank press mech

        Part code PDL 681M20PB

        What is the part code for a Momentary push button to use as dimmer mech for 500 series

         The part code is PDL 681MT10PB

        Does the indicator for the 681MT10PB work on both 230VAC and 24VDC?

        Yes, the Indicator works on both 240VAC and 24VDC.

        Can I buy a replacement hinge flap for PDL 681M16WH

        Not available as a spare part, have to replace the complete unit

        What is the part code for the 600 series push buttons, latching and non-latching

        The part codes are -  Latching - 681MT16, Non-Latching - 681MT10PB

        What does the 16AX mean on the PDL 681MT16WH

         It means it has a 16A fluro rating

        What is the part code for a red pushbutton with back surround in the PDL range

         Part code PDL 681M16PBSRDBK

        What plate is required to fit the on/off and auto/manual switches with a 100MPIR?

        The installation sheet for the 100MPIR is at
        https://www.pdlglobal.com/data/product_documents/100MPIR%20Install%20sheet.pdf

        Please note, the code for the on/off switch is now 681M16HFS, if you want a switch with a hinged flap printed SENSOR, which is good to avoid the switch being turned off accidentally. Also please be aware of the load limitations on the PIR, it is not rated for use with LED's.

        With the 2 switches and the PIR as seen in the instructions you will need a triple plate, as long as these are the only switches you want on the plate, which is a PDL683VH. This is the grid and cover plate, available in white or black, and if you need a metal cover plate you will also need to order the PDL683M** where the ** is either PB for polished brass, BBZ for brushed bronze, or SS for stainless steel.

        There is another option if you find the triple plate too busy or you have other switches to go in the plate, there is a 3 position rotary selector switch available that does Auto Off Manual in one switch, so with the PIR you will only need 2 module holes (PDL682VH). The rotary switch code is 687M3A/M which you can see at:
        https://www.pdl.co.nz/product-details.aspx?rcat=products&catid=0&id=903

        Are the PDL 600 Series Dedicated Switch Modules available in black with white writing?

        Most of our dedicated switch modules are available in both black with white writing and white with black writing. There are however, some modules that are only available as white with black writing; these are listed below:

        681M20AP - Appliance
        681M20HA - Hall
        681M20HWS - HWS
        681M20KT - Kitchen
        681M20PL - Pool
        681M20TL - Towel