681M16HFMW

16A Hinged Switch Module Mwave

Catalogue Number: 681M16HFMW
681M16HFMW
Retail
$41.84
RRP (Inc. GST)
Colour White (WH)
  • White 1 PCE

Specifications

hide show
Range of product
PDL 600 Designer Series
Product brand
Clipsal
Device presentation
basic element with complete housing
Switch function
2-way
Actuator
rocker
Number of rocker
1
Device mounting
flush
Fixing mode
by screws
Local signalling
without
[Ue] rated operational voltage
250 V AC
Rated current
  • 16 A
  • 16 AX, fluorescent lamp
    • Marking
      microwave
      Marking location
      marking on surface

      Frequently Asked Questions

      hide show

      Are the hinged, Protected Switch Modules in the 600 Series available in black?

      The blank module is available in black (PDL 681M16HFBK).
      The printed modules (PDL 681M16HFALWH, PDL 681M16HFFWH, PDL 681M16HFMWWH and PDL 681M16HFSWH), clear protective lid with labelling card module (PDL 681M16HFCLWH) and press module (PDL 681M16HFPWH) are all only available in white.

      What plate is required to fit the on/off and auto/manual switches with a 100MPIR?

      The installation sheet for the 100MPIR is at
      https://www.pdlglobal.com/data/product_documents/100MPIR%20Install%20sheet.pdf

      Please note, the code for the on/off switch is now 681M16HFS, if you want a switch with a hinged flap printed SENSOR, which is good to avoid the switch being turned off accidentally. Also please be aware of the load limitations on the PIR, it is not rated for use with LED's.

      With the 2 switches and the PIR as seen in the instructions you will need a triple plate, as long as these are the only switches you want on the plate, which is a PDL683VH. This is the grid and cover plate, available in white or black, and if you need a metal cover plate you will also need to order the PDL683M** where the ** is either PB for polished brass, BBZ for brushed bronze, or SS for stainless steel.

      There is another option if you find the triple plate too busy or you have other switches to go in the plate, there is a 3 position rotary selector switch available that does Auto Off Manual in one switch, so with the PIR you will only need 2 module holes (PDL682VH). The rotary switch code is 687M3A/M which you can see at:
      https://www.pdl.co.nz/product-details.aspx?rcat=products&catid=0&id=903

      What is the part number for the 681m16pbs in black module with surround

      PDL681M16PBSBKBK