681m16hf black hinged sw mod

16A Hinged Switch Module

Catalogue Number: 681M16HF
681m16hf black hinged sw mod
RRP (Inc. GST)
Colour White (WH)
  • White 1 PCE


hide show
Range of product
PDL 600 Designer Series
Product brand
Device presentation
basic element with complete housing
Switch function
Number of rocker
Device mounting
Fixing mode
by screws
Local signalling
[Ue] rated operational voltage
250 V AC
Rated current
  • 16 A
  • 16 AX, fluorescent lamp
    • Frequently Asked Questions

      hide show

      Can I buy a replacement hinge flap for PDL 681M16WH

      Not available as a spare part, have to replace the complete unit

      What is the momentary switch for the 800 series

      Part number PDL 881M16SP

      What does the 16AX mean on the PDL 681MT16WH

       It means it has a 16A fluro rating

      What is the part number for the 681m16pbs in black module with surround


      What is the part code for the 600 series push buttons, latching and non-latching

      The part codes are -  Latching - 681MT16, Non-Latching - 681MT10PB

      What plate is required to fit the on/off and auto/manual switches with a 100MPIR?

      The installation sheet for the 100MPIR is at

      Please note, the code for the on/off switch is now 681M16HFS, if you want a switch with a hinged flap printed SENSOR, which is good to avoid the switch being turned off accidentally. Also please be aware of the load limitations on the PIR, it is not rated for use with LED's.

      With the 2 switches and the PIR as seen in the instructions you will need a triple plate, as long as these are the only switches you want on the plate, which is a PDL683VH. This is the grid and cover plate, available in white or black, and if you need a metal cover plate you will also need to order the PDL683M** where the ** is either PB for polished brass, BBZ for brushed bronze, or SS for stainless steel.

      There is another option if you find the triple plate too busy or you have other switches to go in the plate, there is a 3 position rotary selector switch available that does Auto Off Manual in one switch, so with the PIR you will only need 2 module holes (PDL682VH). The rotary switch code is 687M3A/M which you can see at:

      Are the hinged, Protected Switch Modules in the 600 Series available in black?

      The blank module is available in black (PDL 681M16HFBK).
      The printed modules (PDL 681M16HFALWH, PDL 681M16HFFWH, PDL 681M16HFMWWH and PDL 681M16HFSWH), clear protective lid with labelling card module (PDL 681M16HFCLWH) and press module (PDL 681M16HFPWH) are all only available in white.

      Is the PDL 681MT16 push button module a 2 way switch

      Yes it is a Two Way with Optional LED

      Are the PDL 600 Series Dedicated Switch Modules available in black with white writing?

      Most of our dedicated switch modules are available in both black with white writing and white with black writing. There are however, some modules that are only available as white with black writing; these are listed below:

      681M20AP - Appliance
      681M20HA - Hall
      681M20HWS - HWS
      681M20KT - Kitchen
      681M20PL - Pool
      681M20TL - Towel


      What codes are required to order a Modena 800 series double socket with extra switch ?

      you will need a double grid (800G2V/800G2H) + 895MA + 881M16L

      Can the 681MT16 be used for two way switching?

      Yes it can, but if 3 way switching is required, please use an additional 600RM relay. (see install sheet for wiring diagram)