Brush Bronze Cover

Bronze | Brush Bronze Cover

Brush Bronze Cover

Item Number: 662M-BZ

RRP (Inc. GST)



Qty UoM EAN Colour



Range of product

PDL 600 Designer Series

Product brand


Product destination


Surface finish






Package 1 Weight

0.01 kg
Show all specifications

Frequently Asked Questions

hide show

What is the diameter of a 93b

diameter of 93b is 66mm

What are the Dimensions for the Clipsal PIR sensor sae_ue_ms_csawe?

What is the part number for a PDL 2 gang switch grid and cover?

The part number for a PDL 2 gang switch grid and cover is PDL682VH.

Some of the key features are:
  • Standard size
  • For 682M metal cover plate
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=682VH


What is the part number for a 63mm saddle?

The part number for a 63mm saddle is a 178/63.
Some of the key features are:
  • 1.6mm gauge
  • 7mm diameter Hole
  • 107mm Centres
  • 130mm Length x 39mm Width x 66mm Height
For further information please visit www.clipsal.com/Trade/Products/ProductDetail?catno=178/63

What are the dimensions for the 43VF15?

The dimensions for the 435VF15 are 118mm high, 80mm wide and 65mm deep.
It has a cut-out diameter of 66mm and the mounting centres are 70mm x 54mm.

For more information, please refer to the link:

Enhancements to Security Wizard in ION Setup around Configuration for Time Synchronization with Advanced Security

Goals and Symptoms

It is possible to set up an ION meter with advanced security to simultaneously accept broadcast clock synchronizations but reject time sync packets sent by specific users.  This constitutes an obscure logical inconsistency between the general meter time synchronization settings and time synchronization settings per user when the meter is set to Advanced Security mode.  Note that the Advanced Security feature is only available on the ION 7650, ION 7550, and ION 8xxx Series Meters.  Meters set up using ION Setup versions 2.0 and 2.1 (up to build 662) will have a greater chance of containing this inconsistency due to the facts detailed below.  This article outlines the enhancements to the functionality of ION Setup 2.1 (build 663 and greater) to help avoid this issue. 
With the introduction of ION Setup 2.0, the default setting for the meter in general  for time synchronization was Allow Broadcasting Time Synchronization = Yes, as illustrated in the screen shot below (Fig 1).

Fig 1. Advanced Options (Setup Assistant > Security > Security Mode > Edit > Advanced)
When the meter is configured for Advanced Security, there are individual user settings for time synchronization which can be set to be in logical conflict with the general Allow Broadcasting Time Synchronization meter setting mentioned above as show in Figure 2 below.

Fig 2. Individual Security Settings in Advanced Security Mode (Setup Assistant > Security > Security Mode > Edit > Advanced > Next)

Facts and Changes

ION meter, ION 8500, ION 8400, ION 8300, ION 8600
Contradiction - conflict, difference, disagreement, discrepancy, negation
Inconsistent - exception, incongruity, irregularity, rarity, unconformity

Causes and Fixes

The logical inconsistency which is currently allowed by ION Setup without any intervention is the following:
Even though USER02 would be unable to issue a time synchronization when logged in as USER02, they would be able to time synchronize the meter by triggering an anonymous broadcast time synchronization.
Meters configured using ION Setup are more likely to contain this logical inconsistency in their settings if ION Setup 2.0 or ION Setup 2.1 (up to and including build 662) was used because the default setting for time synchronization is set to Allow Broadcasting Time Synchronization = Yes in this range of builds.

    • (1)  The default setting for Allow Broadcasting Time Synchronization is now set to No for meters on which Advanced Security is enabled.
      (2)  If the user chooses to over-ride the default setting for Allow Broadcasting Time Synchronization and set it to Yes while, at the same time configuring certain individual users to Time Sync Access = No, ION Setup will generate the following pop-up message to highlight this inconsistency and give the opportunity to fix it:

Text of message is above screen shot:
WARNING: Allowing broadcast time synchronization contradicts having users without time sync access.
Do you wish to turn off Broadcast Time Syncs?
<Yes>  <No>  <Cancel>
More Information
Note that this resolution does not absolutely preclude the possibility that the meters settings still be allowed to include this logical inconsistency.  The user still has the freedom to set Allow Broadcasting Time Synchronization to Yes while, at the same time, configuring certain individual users to Time Sync Access = No.  The key advancement is that this inconsistency is now less likely because of better default settings and because inconsistency is clearly highlighted to the user in a pop-up message box.
This problem was brought to Schneider Electrics attention by the Independent Electricity Market Operator (IMO) for Ontario.
  • Original article#16771

    Last Revised: 22-Jun-07


    All content © 1992-2007 Schneider Electric

Legacy KB System (APS) Data: RESL184791 V2.0, Originally authored by KBAdPM on 06/20/2007, Last Edited by KBAdPM on 07/05/2007
Related ranges: ION Setup 2.0