box mains conn fused 2ph 90a

Mains Connection Boxes, Mains Connection Boxes - Fused, 90A 2 Phase

Catalogue Number: 651A2
box mains conn fused 2ph 90a
Retail
N/A
RRP (Inc. GST)
Colour Black (BK)
  • Black 1 PCE

Specifications

hide show
Product brand
Clipsal
Unit Type of Package 1
PCE
Number of Units in Package 1
1
Package 1 Weight
3.56 kg
Package 1 Height
235 mm
Package 1 width
165 mm
Package 1 Length
370 mm
EU RoHS Directive
Compliant
Mercury free
Yes
RoHS exemption information
Yes
China RoHS Regulation
Product out of China RoHS scope. Substance declaration for your information

Frequently Asked Questions

hide show

Do you do the cover for a mains fuse box 651A?

Yes the part number for a cover for a mains fuse box 651A is 651A-COVER-BK.

What is the part number for the Fuse unit for 651A3-BK

651A-CARRIER
for more information on the 651A series please visit the Clipsal web site on the link provided
https://www.clipsal.com/Trade/search-results?q=651a

Is there a cover to suit a mains connection box 651A available as a spare part?

Yes, the Part number is 651A-COVER

What is the code for a PCU in PDL Modena 800 series?

651M2 + 800MA

What is the standard mains fuse box?

The standard mains fuse box is 651A

​Can you purchase the cover for the 651A on its own?

Yes, you can the part number for the cover is 651A-COVER-BK

What is the part number for a 65kA, single phase, surge arrestor?

The part number for a 65kA surge arrestor is a - A9L65101.

What would be the shroud that goes with the 650/2 ?

The part number for the shroud would be 650/2N-BK.

Please see below link for more information on this product under the documentations tab.
https://www.clipsal.com/Trade/Products/ProductDetail?catno=650/2N

Network Management Card 2 (NMC2) - SNMPv1/v3 walk beginning at .iso through .iso.org.dod.internet does not work properly


Issue

An SNMPv1/v3 walk beginning at .iso through .iso.org.dod.internet does not work properly with my Network Management Card 2 device.

If a user starts a walk at .iso or .1, only certain OIDs come back and the only apc 318 enterprise OID that is returned is .iso.org.dod.internet.private.enterprises.apc.apcmgmt.mfiletransfer.mfiletransferControl.mfiletransferControlInitiateFileTransfer (.1.3.6.1.4.1.318.2.4.3.1). The user may find that some generic mib-2 OIDs are returned but most of the APC enterprise specific 318 OIDs are not returned.



Product Line

 
  • Network Management Card 2 - AP9630/AP9630CH, AP9631/AP9631CH, AP9635/35CH
Devices with an embedded Network Management Card 2 include (but are not limited to): 2G Metered/Switched Rack PDUs (AP86XX, AP88XX, AP89XX), Certain Audio/Video Network Management Enabled products.



Environment
  • AOS v5.1.9, AOS 6.0.6
  • All serial numbers
  • SNMP v1/v3


Cause

Due to a bug with ability to respond to SNMP get-next responses, these OIDs do not respond properly using SNMPv1 or SNMPv3.


Resolution

This issue is resolved in AOS 6.1.2 or higher. For users unable to upgrade or if your application is not yet available with AOS 6.1.2, a few options are listed below.
  • A user can issue an snmp-get (instead of get-next) to individual OIDs and they will return properly anywhere in the heirarchy or PowerNet MIB.
  • Any SNMP walks beginning at .iso.org.dod.internet.private or lower/further into the MIB tree will work properly.



     

Can AR7715 or AR7725 be Used with Other Side Airflow equipment?

Issue:
There are side airflow devices other than the Cisco models noted for AR7715 and AR7725 that require a duct kit.

Product Line:
NetShelter SX

Environment:
All models and serial ranges.
 
Cause:
An installation may require a side airflow duct kit, and the equipment being instaled was not specifically designed for use with the AR7715 or AR7725. 
 
Resolution:
The AR7715 and AR7725 Side Air Flow Duct Kits are designed specifically for use with Cisco's side airflow switches.
AR7715 is designed to be used with Catalyst 6509, 6509E, 6513 and the MDS 9509 and 9513 Multilayer Directors. 
AR7725 is designed to be used with Nexus 7009. 

In general, when recommending a side airflow duct kit for equipment other than the Cisco products listed above we recommend using AR7725. The AR7725 is not as tall as AR7715 and it does not have a mounting rail required for the equipment, as the AR7715 does. To insure proper operation the airflow path should be similar to the Cisco models with similar chassis dimensions: 14U x 17.3" W x 24" D. Installing equipment that's not as tall or deep may result in the need of foam and/or duct tape to close off open spaces between the equipment and the duct. 
 
The AR7715 can also be used with other Cisco 6500 series (such as a 6506) and 9500 series switches, but all components of the kit will not be used. The rear baffle connecting the top and bottom duct cannot be installed without field modification, because the other switches in this family are smaller. This is not a concern, since the smaller switches also have significantly lower airflow requirements. The top and bottom duct alone will supply the smaller switches with sufficient airflow. The height of the AR7715 is adjustable from 24.49" to 33.35". 

If you have any further questions or inquiries please contact Schneider Electric, ITB Technical Support.