Brush Bronze Cover

Catalogue Number: 650BM
RRP (Inc. GST)
Colour Brushed Brass (BB)
  • Brushed Brass 1 PCE
  • Polished Brass 1 PCE
  • Stainless Steel 1 PCE


hide show
Range of product
PDL 600 Designer Series
Product brand
Product destination
Surface finish
Package 1 Weight
0.026 kg

Frequently Asked Questions

hide show

What is the fan mech only for a PDL 625FM


What would be the shroud that goes with the 650/2 ?

The part number for the shroud would be 650/2N-BK.

Please see below link for more information on this product under the documentations tab.

What is the difference in dimensions from the old 3106WC6U35 to the new 3106W06C604?

3106WC6U35 -350mm (H) X 600mm (W) X 350mm (D)
3106W06C604-gy- 363mm (H) X 600mm (W) X 400mm (D)

What is the difference in dimensions from the old 3106WC6U35 to the new 3106W06C604?

3106WC6U35 -350mm (H) X 600mm (W) X 350mm (D)
3106W06C604-gy- 363mm (H) X 600mm (W) X 400mm (D)

Can AR7715 or AR7725 be Used with Other Side Airflow equipment?

There are side airflow devices other than the Cisco models noted for AR7715 and AR7725 that require a duct kit.

Product Line:
NetShelter SX

All models and serial ranges.
An installation may require a side airflow duct kit, and the equipment being instaled was not specifically designed for use with the AR7715 or AR7725. 
The AR7715 and AR7725 Side Air Flow Duct Kits are designed specifically for use with Cisco's side airflow switches.
AR7715 is designed to be used with Catalyst 6509, 6509E, 6513 and the MDS 9509 and 9513 Multilayer Directors. 
AR7725 is designed to be used with Nexus 7009. 

In general, when recommending a side airflow duct kit for equipment other than the Cisco products listed above we recommend using AR7725. The AR7725 is not as tall as AR7715 and it does not have a mounting rail required for the equipment, as the AR7715 does. To insure proper operation the airflow path should be similar to the Cisco models with similar chassis dimensions: 14U x 17.3" W x 24" D. Installing equipment that's not as tall or deep may result in the need of foam and/or duct tape to close off open spaces between the equipment and the duct. 
The AR7715 can also be used with other Cisco 6500 series (such as a 6506) and 9500 series switches, but all components of the kit will not be used. The rear baffle connecting the top and bottom duct cannot be installed without field modification, because the other switches in this family are smaller. This is not a concern, since the smaller switches also have significantly lower airflow requirements. The top and bottom duct alone will supply the smaller switches with sufficient airflow. The height of the AR7715 is adjustable from 24.49" to 33.35". 

If you have any further questions or inquiries please contact Schneider Electric, ITB Technical Support.

What are the dimensions of a 3106W12C605 Wall Cabinet?

The Dimensions of a 3106WS12C605-GY  are 630mm (H) x 600mm (W) x 500mm (D).


What is replacement for part no 6500A

Replaced with part no 6500ADS

for more information on this part please refer to https://www.clipsal.com/Trade/Products/ProductDetail?catno=6500ADS

What is the part number for a replacement in line ex-fan for the 6501?

No. Unfortunately there is no replacement available.

What is the part number for a 250mm ex-fan with auto retract blades?

The part number for a 250mm ex-fan with auto retract blades is - 6220-0

For further information , visit link below:-
User-added image

Will the FLHDS draft stopper suit 6500A or 6600A units?

Yes the FLHDS draft stopper suits 6500A or 6600A
This is the link to the brochure. pls refer page 2 of the brochure.

What is the plate to cover the hole from a 149 flush box

Use PDL 683/683C + 2 x PDL 650VH

Can the PDL 600FM (fan speed controller) be used on split phase fans

Yes it can be used on split phase fans
Show More