box mains connection 2term

Mains Connection Box, Unfused, 2 Terminal, 25-20mm, 19/0.044 Cable

Catalogue Number: 650/2
box mains connection 2term
Retail
$135.81
RRP (Inc. GST)
Colour Black (BK)
  • Black 1 PCE

Specifications

hide show
Product brand
Clipsal
Number of clamp
2
Cable entry number
2
EU RoHS Directive
Compliant
Mercury free
Yes
RoHS exemption information
Yes
China RoHS Regulation
Product out of China RoHS scope. Substance declaration for your information

Frequently Asked Questions

hide show

What would be the shroud that goes with the 650/2 ?

The part number for the shroud would be 650/2N-BK.

Please see below link for more information on this product under the documentations tab.
https://www.clipsal.com/Trade/Products/ProductDetail?catno=650/2N

What size cable suits part number 650/4?

The part number 650/4 accommodates 16mm2 cable.

Can you buy the cover only for a 650/4al-bk?

Yes. The cover for the 650/4AL-bk is a 650/4 COVER-BK

What is the separator for a 15092

 The separator part code is 27001

What bracket is used to suit the larger Prestige range.

The bracket would be the 156/2.
This is also available in a wall box version as a157/2.
Please see below documentation for more information.
https://www.clipsal.com/Trade/Products/ProductDetail?catno=156/2

What is the wall box for a P2033/2VA-WE

 Part code 157/2

Can AR7715 or AR7725 be Used with Other Side Airflow equipment?

Issue:
There are side airflow devices other than the Cisco models noted for AR7715 and AR7725 that require a duct kit.

Product Line:
NetShelter SX

Environment:
All models and serial ranges.
 
Cause:
An installation may require a side airflow duct kit, and the equipment being instaled was not specifically designed for use with the AR7715 or AR7725. 
 
Resolution:
The AR7715 and AR7725 Side Air Flow Duct Kits are designed specifically for use with Cisco's side airflow switches.
AR7715 is designed to be used with Catalyst 6509, 6509E, 6513 and the MDS 9509 and 9513 Multilayer Directors. 
AR7725 is designed to be used with Nexus 7009. 

In general, when recommending a side airflow duct kit for equipment other than the Cisco products listed above we recommend using AR7725. The AR7725 is not as tall as AR7715 and it does not have a mounting rail required for the equipment, as the AR7715 does. To insure proper operation the airflow path should be similar to the Cisco models with similar chassis dimensions: 14U x 17.3" W x 24" D. Installing equipment that's not as tall or deep may result in the need of foam and/or duct tape to close off open spaces between the equipment and the duct. 
 
The AR7715 can also be used with other Cisco 6500 series (such as a 6506) and 9500 series switches, but all components of the kit will not be used. The rear baffle connecting the top and bottom duct cannot be installed without field modification, because the other switches in this family are smaller. This is not a concern, since the smaller switches also have significantly lower airflow requirements. The top and bottom duct alone will supply the smaller switches with sufficient airflow. The height of the AR7715 is adjustable from 24.49" to 33.35". 

If you have any further questions or inquiries please contact Schneider Electric, ITB Technical Support.

Is the PDL 693/2 - horizontal double socket, unswitched with separate bases - available in black?

The PDL 693/2 is only available in white.
 

Looking for a 80A 3pole din rail mount mains switch

The mains switch is 15092

What is the code for a PCU in PDL Modena 800 series?

651M2 + 800MA

What is replacement for part no 6500A

Replaced with part no 6500ADS

for more information on this part please refer to https://www.clipsal.com/Trade/Products/ProductDetail?catno=6500ADS

What is the part number for a replacement in line ex-fan for the 6501?

No. Unfortunately there is no replacement available.
 
Show More