RCA Speaker Socket

RCA Speaker Socket

RCA Speaker Socket

Item Number: 640M-BK

RRP (Inc. GST)
Colour Black (BK)
  • Black 1 PCE




Range of product

  • VDI
  • PDL 600 Designer Series
    • Product brand




      without marking


      Package 1 Weight

      0.012 kg
      Show all specifications

      Frequently Asked Questions

      hide show

      Does the PDL 640MF have a RCA at the back

       No - the 640MF has an F type connection at the back

      What are the dimensions of the WS229?

      The dimensions of the WS229 are 80mm (L) X 64mm (W) X 48mm (D).

      Conzerv EM6400 Instruction Bulletin for firmware 03.02.xx

      This documentation is for use with Conzerv EM6400 meters of firmware 03.02.xx. It is NOT for use with firmware 03.03.xx and above.
      EM 6400 Manual (Firmware 03.02.xx).pdf

      Legacy KB System (APS) Data: RESL203086 V1.0, Originally authored by MaTh on 08/11/2010, Last Edited by MaTh on 08/11/2010
      Related ranges: EM 6400 DigitAN

      What is the dimensions of a WS226 series product?

      The dimensions of the WS226 range is 85mm x 85mm x 64mm Deep.

      Please follow the below link for further information on this range:

      What mechs fit into Pro Series grids?

       Pro Series is compatible with all PDL300 Series & Clipsal 40M mechanisms.

      What is Iconic part no for cap to suit 40M

      Part no 40AR
      for more information on this part please refer to https://www.clipsal.com/Trade/Products/ProductDetail?catno=40AR-WY

      User-added image


      What are the cable part numbers for M340 IO modules with 40 pin connections ?

      The following M340 IO modules require preconfigured 40 pin connector cable with color coded flying leads.
      Table below shows module and cable part numbers.

      Discrete Module Connection Cable Part # Qty needed
      BMX DDI 3202 1 x 40 BMX FCW 303, 503, 1003 ( 1 )
      BMX DDI 6402 2 x 40 BMX FCW 303, 503, 1003 ( 2 )
      BMX DDM 3202 1 x 40 BMX FCW 303, 503, 1003 ( 1 )
      BMX DDO 3202 1 x 40 BMX FCW 303, 503, 1003 ( 1 )
      BMX DDO 6402 2 x 40 BMX FCW 303, 503, 1003 ( 2 )
      text text
      AnalogModule text
      BMX ART 0414 1 x 40 BMX FCW 301S*, 501S* ( 1 )
      BMX ART 0814 2 x 40 BMX FCW 301S*, 501S* ( 2 )
      * S suffix denotes shielded cable for Analog IO.

      Legacy KB System (APS) Data: RESL212360 V1.0, Originally authored by DiSa on 08/24/2013, Last Edited by DiSa on 08/24/2013
      Related ranges: Modicon M340

      What is the minimum screen display resolution required for Concept =>2.6?

      The minimum display resolution for Concept =>2.6 is 800 x 600 pixels. Until this version, the minimum resolution was 640 x 480.

      Legacy KB System (APS) Data: RESL167776 V1.0, Originally authored by on , Last Edited by on
      Related ranges: Concept

      Is is possible to lock the display on the Conzerv EM6400 series meter?

      Enable screen lock on EM6400
      Press the left and right arrows simultaneously in any of the Main/Sub pages to set that page as the default lock page. After two minutes of inactivity, the meter will default back to the lock page.

      Note: Locking the page will prevent entry into setup (both through the Edit menu as well in Power ON setup mode).

      To disable the screen lock feature, press the left and right arrows simultaneously when on any of the Main/Sub pages.

      Legacy KB System (APS) Data: RESL203211 V1.0, Originally authored by MaTh on 08/30/2010, Last Edited by MaTh on 08/30/2010
      Related ranges: EM 6400 DigitAN

      PM1000, PM1200, and EM6400 block registers

      Certain registers must be read as a "block" from the PM1000, PM1200, and EM6400 meters. In order to read these registers, one must set the starting register to 3001, then 20 registers must be read in a single read. Attempting to read these registers in any other manner will result in either a time out or an error.The example in the picture below shows an scenario.

      Note: "Function Code: O3H Read" is stating that these registers are Holding Registers.
      The PowerLogic PM1000 Series Power Meters User Manual can be found here. It includes the PM1000/PM1200/EM6400 register list.

      Legacy KB System (APS) Data: RESL211609 V1.0, Originally authored by DaFr on 05/30/2013, Last Edited by DaFr on 05/30/2013
      Related ranges: PM1000 series, EM 6400 DigitAN

      How do I scale 0 - 4095 to 6400 - 32000 using 984 Ladder Logic?

      The following network scales data from 0-4095 to 6400 - 32,000 when 4-20ma (6400 = 4 mA, 32,000 = 20 mA) outputs are required
      but a 0-20ma analog output is used. .

      Register 400001 and 400002 are used together in the top node of the EMTH Block, where 400001 is
      always 0000 data and 400002 is the variable data, 0-4095, to be scaled. Register 400003, displayed in data
      format float, is a fixed floating point value that the user enters as 6.25153 (note that two registers are
      used to create the floating point value, 400003 & 400004 in this example). Register 400005 (and 400006)
      is the floating point result of the integer and floating point multiplication (EMTH block).

      The FTOI (Floating Point TO Integer) block converts the floating point result of registers 400005
      and 400006 to an integer value in a single register 400007.

      The AD16 block adds the top node register 400007 to the middle node constant 6400 and places
      the result in register 400009. This register will then map to one of the analog outputs.

      The following data screens shows the input values of 0 and 4095 and there corresponding results.

      What is the part number for a 2 gang Iconic switch plate and switch mech and dimmer?

      The part number for a 2 gang Iconic switch plate and switch mech and dimmer is - 3042HA , 40M & 41E300PBUD2SM

      For further information , visit link below:-
      User-added image
      Show More