626N

Neon Key Card Switch

Catalogue Number: 626N
626N
Colour: White
Colour: Per UOM Std.
  • White 1 PCE

Specifications

hide show
Range of product
PDL 600 Designer Series
Product brand
Clipsal
Device presentation
basic element
Switch function
2-pole
Actuator
key card
Number of poles
2
Fixing mode
by screws
Local signalling
neon
[Ue] rated operational voltage
250 V AC
Rated current
  • 20 A
  • 16 AX, fluorescent lamp
    • Marking
      without marking
      Standards
      AS/NZS 3133

      Documents & downloads

      hide show
      Filter items
      • All

      • Product Brochures

      • Technical Data Catalogues

      • Installation Instruction

      • Specifications

      • Certificates (MSDS)

      • Corporate Marketing

      Frequently Asked Questions

      hide show

      Can the blank mechs in the 626N be removed and replaced with other 600 series mechs?

      YES -  those blank mechs are standard blanks and are removable and replaceable with other 600 series mechs.

      How to wire the built in analog input of the M221 to a Dwyer 626 pressure transmitter?

      Issue:
      How to wire the built in analog input of the M221 to a Dwyer 626 pressure transmitter?

      Product Line:
      Somachine Basic, wiring, analog input

      Environment:


      Cause:


      Resolution:
      The Dwyer 626 is a 3wire connection which will require it's own power.  The - (negative of M221) goes to the common and + (positive of M221) goes the white.  See below for more information. 

      Dwyer pressure transmitter:

      The receiver would be the M221 in this case.


       

      What is the power consumption and response time for the Masterpact NW and NT UVR?

      Issue:  
      What is the power consumption and response time for the Masterpact NW and NT undervoltage release?

      Product Line:
      Masterpact NW and NT

      Resolution:
      Power Consumption (VA or W)  Constant/Inrush  4.5/200 
      Operating Threshold  Opening  0.35 to 0.70 Vn 
        Closing  0.85 Vn 
      Circuit Breaker Response Time at Vn  NW  90 ms ±10 
      NT  40 ms ±10 

      What registers is the IP address of a PM8 with PM8ECC stored?

      The IP address of the Ethernet Option Module is stored in registers 622 and 623.
      Register format:
      1st Register High byte: IP Address 1st Octet
      1st Register Low byte: IP Address 2nd Octet
      2nd Register High byte: IP Address 3rd Octet
      2nd Register Low byte: IP Address 4th Octet

      Range:
      000.000.000.000 to 255.255.255.255

      Example:
      In this example we are assuming that the PM800 we are reading has a current IP configuration of 10.168.96.17

      1. Read registers 622 and 623



      2. Convert the register data into binary format:
      Register 622: 2728 dec = 101010101000 bin
      Register 623: 24593 dec = 110000000010001 bin

      3. Convert the binary data into High and Low bytes for each register:
      Register 622: 1010 10101000
      High byte = 1010 = 00001010
      Low byte = 10101000

      Register 623: 1100000 00010001
      High byte = 1100000 = 01100000
      Low byte = 00010001

      4. Convert the High and Low Bytes back to decimal format:
      Register 622:
      High byte = 00001010 bin = 10 dec
      Low byte = 10101000 bin = 168 dec

      Register 623:
      High byte = 01100000 bin = 96 dec
      Low byte = 00010001 bin = 17 dec

      IP address = 10.168.96.17


      Note: You can use the same procedure to determine the IP Subnet Mask and IP Router Address which are contained in the following registers.
      IP Subnet Mask: 624 and 625
      IP Router Address: 626 and 627


      Legacy KB System (APS) Data: RESL204825 V1.0, Originally authored by MaTh on 03/16/2011, Last Edited by MaTh on 03/16/2011
      Related ranges: PM8ECC, PM800 series