625F

300Va Fan Speed Control Silent

Catalogue Number: 625F
625F
Colour: White
Colour: Per UOM Std.
  • White 1 PCE
Added to cart

Specifications

hide show
Range of product
  • PDL
  • Series 600
    • Product brand
      Clipsal
      Device presentation
      basic element
      Power consumption in VA
      300-300 VA
      Control type
      rotary knob

      Frequently Asked Questions

      hide show

      Will the PDL 625F work on an 80w fan

      Yes if the motor is shaded pole or split phase

      What is the difference between the 625F and the 625C3?

      Both are fan speed controllers but 625C3 is designed for 3 speed control of ceiling sweep fans (max 100VA), the 625F is a fully variable fan speed controller for extract fans up to 500VA.

      Can I use PDL625C3 for a 58W extractor fan

       May be suitable but not spec'd.   Rather use a 625F which has a minimum load of 40W

      What is the maximum load and minimum load for a PDL 625F rotary fan speed controller ?

      The Maximum Load is 500W and the Minimum Load is 40W

      Can two fans wired in parallel work when using a PDL 625FMWH

      Yes, as long as the combination doesn't exceed the 625 specifications.

      What is the fan mech only for a PDL 625FM

      PDL 600FM

      I have a PDL 625FM fan controller it keeps on humming

      Recommend changing to the PDL 625C3 Fan controller

      Will the PDL 625FM fan controller work with a Permanent Split Capacitor (PSC) motor?

      Although a Permanent Split Capacitor (PSC) is a variation of a Split Phase Induction motor the electronic fan controller is suitable for Split Phase induction motors and Shaded pole motors ONLY.
      They are not specified for use on Permanent capacitor start motors.

      For further information on the 625FM please visit https://www.pdl.co.nz/Trade/Products/ProductDetail?catno=PDL625FM

      What is part number for PDL Universal fan module?

      The part number for PDL Universal fan module is a PDL625FM.
      For information on this part please refer to
      https://www.clipsal.com/Trade/search-results?q=pdl 625 fm

      What would be the dimensions for a DBF60, DBF45, DBF30 and DBF15.



      335W x 625H x 80D. dbf60
      335W x 491H x 80D. dbf45
      335W x 357H x 80D. dbf30
      335W x 223H x 80D. dbf15
      These are flush mount boards in the PDL range in 15, 30, 45 and 60 module.
      Please see following link for more product detail under the documents tab.
      https://www.clipsal.com/Trade/Products/ProductDetail?catno=DBF15

      What is the power consumption for the Masterpact NW shunt trip and shunt close?


      Issue:
      Power consumption

      Product Line:
      Circuit Breakers

      Environment:
      Applies to Masterpact NW breakers shunt open and shunt close accessories.

      Cause:
      Shunt open/close electrical characteristics? VA requirements required to shunt open and close?

      Resolution:
      Maximum power consumption: 4.5 VA maintained, 200 VA inrush.


      See Masterpact Catalog, 0613CT0001

      What is the size of cable that can be used for the remote connection of time delayed UVR/MN module of Masterpact ACBs.

      With the increase in length there always occurs a voltage drop in the cable. Refer the attachment for voltage drop values, according to cable sizes and nominal current.

      So you have to consider the size and length of the cable as per the values and load consumption of UVR/MN module.
       
      Standard recommendation is that the voltage supplied to UVR/MN should not be less than 5% of rated voltage, even if the MN can operate down to 0.85Un.
       
      Example:
       
      Time Delay UVR/MN module of 230V AC and Cable size 2.5 sq. mm considered for this example.
       
      Nominal current is pick-up current that is 200VA/230V = 0.9A.
      With 2.5sq. mm/1A, voltage drop is 0.8% for 100 meter (as per table attached). This means that one can go up to 625 meter without any problems.
       
      It could be more but keep in mind that minimum supply voltage cannot be less than 0.85Un.
      Show More