619mm black module clip

Module Clip

Catalogue Number: 619MM
619mm black module clip
Colour: White
Colour: Per UOM Std.
  • Black 1 PCE
  • White 1 PCE

Specifications

hide show
Product brand
Clipsal
Range of product
PDL 600 Designer Series
Product or component type
clip

Documents & downloads

hide show
Filter items
  • All

  • Product Brochures

  • Technical Data Catalogues

  • Technical Leaflet

  • Installation Instruction

  • Specifications

  • Certificates (MSDS)

  • Corporate Marketing

Frequently Asked Questions

hide show

Can the 619MM be used to make the DCDAL31SROT fit into a 600 series plate?

No, the 619MM recesses the switch too much, and it is not recommended for use with dimmers or switches.
 

Is there a HDMI Module in the PDL range, angled like the clipsal one

You will need to use a Clipsal 30HDMIA with a PDL 619MM

What is the physical length of a XS608B1PAM12

 The length is 61mm

How can I achieve RCA to RCA connectors in 600 series?

Use the Clipsal 30SPK/2's with a 619MM.

What is the part code for a suspended waterproof data outlet

 The part codes are: 56PE2/25 + 56L1 + 56MO500/1 + 619MD

What is the cut out size for a PDL 644

Size is 90 x 69mm

What is the part code for a 19mm vent for the NSYPLM32

 The part code is NSYCAG19LP

What are the dimensions for part number LC1F330U7?

The dimensions for part number LC1F330U7 are:
206mm (H) x 213mm (W) x 219mm (D)

 

What are the dimensions of part number 230DRAS1MI?

The dimensions for part number 230DRAS1MI are 612mm (H) 505mm (W) 260mm (D).

For more information, please visit:
https://www.clipsal.com/Trade/Products/ProductDetail?catno=230DRAS1MI

What is the part number of the mounting block to suit 644, PDL quad outlet?

Part number of the mounting block to suit 644, 4 gang switched socket is:
PDL640RC - Round conduit adaptor 25mm.
PDL640SC -square conduit adaptor 25.5mm x 16.5mm.
Size: 196mm x 84mm x 19mm high. 84mm mounting centres.
For further information, please visit https://www.pdlglobal.com/data/product_documents/769_datasheet_document.PDF




 

Can I purchase a PDL 615MF without the bit in middle

 Not available

What is the Length of LV432598?

The length is 195mm - 600mm to back of door from the base, where the breaker is mounted.
For more information please see the instruction sheet .....https://www.schneider-electric.com.au/sites/australia/en/support/substitution-tool/substitution-tool.page..
 

What is part number for 115mm x 115mm large mounting flange?

Part number for large mounting flange is 448SD

What is the dimension of INS43630, Optiline 50 manual pull up furniture box?

The dimension of INS43630 is 319mm /Ø112mm. Hole dimension: Ø100mm.
INS43630 Pop-up function desk unit, one-sided, manual. Configured with 1x double power outlet, Australian standard, with 3m 1.5mm2 external cable without plug and 2x 30 Mech/keystone data outlet. When inactive, the box lies flush with the desk-top. By a light pressure on the top, the box can be lifted up from the desk surface. As soon as the box is not in use, it is easily pressed back to the flush level. Earthed.
Material: Aluminium, natural anodized, and powder coated zinc and aluminum.
For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=INS43630
 

Can the 610MN neon module be wired in series with a load

No

What is the 600 Series keystone module

Part numbers PDL 615MKC or PDL 619MKC

I'm wanting to use a 619MAC AT&T/Suttle clip module in the Modena/Strato series. Is there a Modena/Strato equivalent?

No, there is not a Modena/Strato equivalent however you can pair the 619MAC module with a Modena 600/500 Series Modular Range Adaptor, 800MA. This combination will allow you to use a 619MAC module in the Modena/Strato plates.

What is the part number for a 6 gang switch plate 114mm x 114mm?

The part number for a 6 gang switch plate 114mm x 114mm is - 36/2

 

Dimensoins of a PDL56E8 ?

PDL56E8 = 198mm w x 391mm L

What is the part number of the adaptor that can be used for 25 x16mm ducting to 20mm conduit?

900/25/16CA is the adaptor that can be used for 25 x16mm ducting to 20mm conduit.
For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=900/25/16CA
 

What is the part number for a 45RU data cabinet 2198mm x 800mm x 800mm ?

The part number for a 45RU data cabinet 2198mm x 800mm x 800mm is - 3106N45C808

For further information , visit link below:-
https://www.clipsal.com/Trade/search-results?q=3106N45C808
User-added image

Whats the dimensions for a T300, T300L, T300S

 210 x 158 x 117mm (L x W x D)

What is the width of the wire for part 2ANGWR?

.09MM per strand, 1x 7 strands and total diameter is 2.70mm 

What is the radius of part no 247PH100

Bend Radius for 247PH100 is 715mm

What is the cutout size for a Clipsal 7007A fan

 Cutout size  = 213mm

What are the dimensions of a 3106W12C605 Wall Cabinet?

The Dimensions of a 3106WS12C605-GY  are 630mm (H) x 600mm (W) x 500mm (D).

 

What is the dimensions ABL4RSM24100

 The dimensions 63 x 140 x 118mm

What is the dimensions ABL4RSM24100

 The dimensions 63 x 140 x 118mm

Is there a LED version of the PDL 610MN

No but you could use a harmony indicator in a 622T1

What is the alternative for a Main switch (surface) 3 phase T300-BK?

The original T300-BK was unfortunately discontinued. As an alternative the T300FA is very similar. The Majority of its components are the same but some specifications may vary.
Some of the key features are:
  • Panel mount
  • 300 Amp rated
  • Triple pole
  • Front wiring cover
  • Has dimensions of 210mm (L) x 158mm (W) x 112mm (D)
For Further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=T300FA

Or see PDF attached below.
 

What wall clip is used for Prestige large format plates?

The 154/2 is the clip to suit any Prestige large format plate 115mm x 115mm

What is the part number for a metal plate range double GPO on plate that is 115mm x 115mm?

The part number for a metal plate range double GPO on plate that is 115mm x 115mm is - B15V2A

For further information , visit link below:-
https://www.clipsal.com/Trade/search-results?q=B15V2A
User-added image

Can you get a double GPO that is bigger than the standard 115mm x 85mm?

Yes, there are a couple of options that are bigger than the standard 115mm x 85mm. 
There is the P2025/2-WE, M8015LVA-WE or M8025LVA-WE.

What is the alternate for 3106HWC12U50, 12RU Hinged Wall Cabinet 617mm(H) x 600mm(W) x 500mm(D)?

3106WS12C605-GY is the alternate for 3106HWC12U50. 3106WS12C605-GY  is a wall cabinet 19”, 12RU with Swing Frame, Grey, 630mm (H) x 600mm (W) x 500mm (D).

 

Whats are the dimensions of the T200, T200FA, T200F, T200X, T200L, T200S

 210 x 158 x 112mm (L x D x W) 

Is there a replacement for the Clipsal PC1

There is no replacement in the Clipsal range.  You could use the PDL 673MM in a PDL 681VH plate

What are the dimensions for the 4CS12FD?

The dimensions are 315mm W x 255mm H x 97mm D
 

What is the minimum ceiling cavity for a 7600ATP?

The minimum recommended cavity to instal 7600atp is 215mm the unit itself is 180mm high.

What are the dimensions for part number C2016/2?

The dimensions for part number C2016/2 are:
159mm (L)  47mm (H) 28mm (D)

What are the over all dimensions for the 56SB13?

The over all dimensions for the 56SB13 are 198mm (H) X 294mm (W) X 139mm (D).

What are the dimensions for part number 3105/4?

The part number 3105/4 dimensions 214mm x 78mm x 32mm.

What are the dimensions of the 4FCC15SK ?

Dimensions are Height 347mm , width 514mm and depth of 30mm

Which part codes do I need to make a Modena phone mech

 You will need a PDL 800MA  adaptor + PDL 617M2 telephone mech  or a data mech PDL619MD

What are the dimensions of the 4C45MFD-WE?

The dimensions are as follows: 705mm x 465mm x 116mm

What is the part number of the mounting block to suit 31/3VX, 162 x 115mm blank switch plate?

Unfortunately we do not have a mounting block  to suit 31/3VX, large format blank switch plate.

What is the part number for a floor box which is 310 x 310?

The INS62044 has the dimensions of  311mm x 311mm x 105mm complete with a square plastic recessed lid. This part has provisions for 4 power and 4 data (suits 4 x 2000 or C2000 Series outlets). 
The base is metal which is used primarily in a concrete floor.

For further information please visit the following link: www.clipsal.com/Trade/Products/ProductDetail?catno=INS62044
 

What is the part number of the lid to suit mounting enclosure 56E4?

The part number of the lid to suit mounting enclosure 56E4 is 56L4. Mounting enclosure lids are moulded in UV stabilised polycarbonate and supplied complete with sealing gasket. The dimensions are 192mm x 192mm x 28mm deep.
For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=56L4

 

What is the dimensions for a PDL 681 1-Gang Switch ?

Overall Dimensions - 118mm x 74mm
Mounting Centres - 84mm

What is the dimensions for a PDL 682 2-Gang Switch ?

Overall Dimensions: 118mm x 74mm
Mounting Centres - 84mm

What is the dimensions for a PDL 683 3-Gang Switch ?

Overall Dimensions: 118mm x 74mm
Mounting Centres: 84mm