60R32 depending on the colour of the mechanism will suit 4025XA, 4025XUA in the saturn range and Z4025XA, Z4025XUA in the Saturn Zen range. It will not fit into any other switch plates in the Saturn or Saturn Zen range.
For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=60R32
Yes, the 60R32 series are designed only to be fitted into the 4025XUA and 4025XA series
The 60R32 switch mechanism accommodates up to 4 x 1.5mm2 or 3 x 2.5mm2 or a single 4mm or a single 6mm.
No you cannot, the 4025XA is designed to fit a 60R16 or a 60R32.
No , The 60R32 series mechs are only designed to go into the 4025XA and 4025XUA plate styles. If Mechs over 32 amp are required for Saturn plates then you will need either 4031VH plate and 30M35 series mechs or the dedicated cooker plates 4061D32 or 4061/45 series
Yes, 60R32 or 60R32COOK - 32A , mech. Do not have a double pole version.
60R32 mechanisms are available in Four specific colours Arctic silver (3A ) , Charcoal ( CC ) Zen Black ( ZB ) and Zen White ( ZW )
Arctic Silver ( 3A ) compliments the Ocean mist , Espresso Black and Pure White colour ranges , while Charcoal ( CC ) is designed to match the Saturn Horizon Silver and Horizon Black plate range.
Zen Black ( ZB ) and Zen White ( ZW ) are designed to go with the new Saturn Zen plate colours
For more information on this product range please visit the Clipsal Web site on the link provided
The part number is 60R32 which is available in Artic Silver (colour code 3A - which suits the standard Saturn range), Charcoal (CC - for the Saturn Horizon range), Zen Black (ZB - for the Saturn Zen range) and Zen White (ZW - for the Saturn Zen range). This part is rated 32A suitable for the 4025XUA (standard Saturn) or Z4025XUA (Saturn Zen) which is a standard double GPO with an extra removable switch
Please go to the website via the following link www.clipsal.com/Trade/Products/ProductDetail
and check under the Documentation Tab for more information.
Yes, the 60R32 is available in Zen White (ZW) - use the code 60R32-ZW.
It is also available marker COOKER - use the code 60R32COOK-ZW
The part number to suit is a - 60R32 or 60R32COOK
No, unfortunately there isn't a 32A switch that fits in a 2 gang Saturn switch plate.
The only 32A switches in the Saturn series are the 60R32 that fits in the 4025XA and the 4061D32 cooker switch.
For further information please visit https://www.clipsal.com/Trade
No unfortunately that particular switch only comes in 10A and is not removable.
However, the 4025XA has a removable mechanism and can be replaced with the mechanism 60R32 which is a 32A mechanism.
Some of the key features are:
- Saturn Series
- Extra removable switch
- Various colours available
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=4025XA
Below part numbers are needed to build a Zen double outlet with 32A extra switch mechanism:
Z4025XUA - A double Socket Outlet 10A 250V Less Extra Switch
60R32 - Switch Mechanism 32A 250V. 60R32COOK is the part number of the 32A, 250V switch mechanism marked COOKER. (The mechanisms are available in ZW (Zen White) or ZB (Zen Black) to suit the Zen plate)..
The PDL 680M32 (switch module, 1 way, 2 terminal, 32A, 240V) is only available in white or black.
Can an ATV680 run with unbalanced input voltage?
Altivar 680 Process Drives
Site line voltage is unbalanced
It is NOT recommended to operate an ATV680 AFE on a 480V power system with a voltage unbalance of 4% to 7.5%. This is far outside the specification of the drive.
The mains voltage must comply with the requirements according to IEC 60038 and EN 50160:
- Unbalance between phases: < 2 %
- Total harmonic factor THD(v): < 10 %
- Maximum single harmonic: < 5 %
With this supply voltage the drive complies with the specified THDi value.
If the voltage unbalance is 2 … 4% the drive will work but the THDi value will be higher than specified. A voltage unbalance of more than 4% will harm the drive. The input IGBT might overheat and/or the fuses might blow due to unsymmetrical input current. There is also a risk of oscillations if the voltage controller is not able to keep DC bus voltage constant.
What is the fuse or circuit breaker rating for LXM32 drives?
For 115VAC and 230VAC drives, the maximum fuse to be connected upstream is 25 Amps, Class CC or J as per UL 248-4, alternatively circuit breakers with B or C characteristic.
For 400VAC and 480VAC drives, the maximum fuse to be connected upstream is 30/32 Amps, Class CC or J as per UL 248-4, alternatively circuit breakers with B or C characteristic.
Help is needed to identify an IEC connector.
Cables and Connectivity Solutions
All AC power cords.
There are many different shapes and sizes for IEC connectors, and different amp ratings. There are also male and female versions of each.
The attached file will help you correctly identify a connector and it's gender. Compare these drawings to the port on the device or the connector on the cable.
Notice that the female connectors are all odd numbers and the males are even: IEC 320-C1 is female, and IEC 320-C2 is male.
If you're having difficulty differentiating between a male and a female connector please follow these guidelines:
1) A male IEC320 connector on a cable plugs into a power source.
2) A female IEC320 connector on a cable plugs into a device requiring power.
3) If the connector on the device is a male you need a female on the cable.
4) If the connector on the device is a female you need a male on the cable.
5) To extend the length of an existing cable requires a male to female cable.
For a list of IEC 320 connectors please see the attached file:
Where can I buy a EasyPact MVS breaker?
EasyPact MVS circuit breakers
There are no plans for a general release of the EasyPact MVS circuit breaker line in the US.