surface switch 2 gang four pole 32a base mount
surface switch 2 gang four pole 32a base mount
surface switch 2 gang four pole 32a base mount
surface switch 2 gang four pole 32a base mount

Surface Switch 2 Gang Four Pole 32A Base Mount

Catalogue Number: 56SWH432
surface switch 2 gang four pole 32a base mount
surface switch 2 gang four pole 32a base mount
surface switch 2 gang four pole 32a base mount
surface switch 2 gang four pole 32a base mount
Colour: Grey
Colour: Per UOM Std.
  • Grey 1 PCE
  • Resistant Orange 1 PCE
Added to cart

Specifications

hide show
Range
Clipsal - 56 Series
Product or component type
switch
Colour
cover: grey
Handle colour
red
Suitability for isolation
yes
Poles description
4P
Control type
rotary knob
Tightening torque
0.8 N.m
[Ue] rated operational voltage
500 V AC 50 Hz
Rated current
32 A
Breaking capacity
32 kA at 500 V (AC-21A)
Motor M-rating AS3133
M168 at 690 V
Rotary handle padlocking
2 padlocks 8-8 mm
Targeted country
Australia
Market segment
  • utility
  • industry
  • small commercial
    • IP degree of protection
      IP66 conforming to AS 60529
      Standards
      AS/NZS 3133
      EU RoHS Directive
      Under investigation

      Frequently Asked Questions

      hide show

      What is the part number for a 56 series switch 4pole 32A?

      The part number is 56SW432.

      Has the 56SW432 changed design?

      No, the design and or mechanism hasn't changed since December 2002. The mechanism was changed to a seven series mechanism.

      What is a 2pole 25A 56 Series isolator for a dock

      Part number is PDL 56SW332

      Can I use a PDL 56SW3632 to run 22kw motors

       PDL56SW3632LEGY can't be used, you will need to use an industrial switch

      Does the MSC432RTD and the 56SC432RC have the same pin configuration?

      Yes, they do have the same pin configuration.

      What is the difference between a 56SO432 and a 56SO432/3?

      What is the part number for a 56 switch 1ph 10amp, key removable both positions

      PDL56SW2K110LEGY     56SW2K110 GREY (LE) PDL
      PDL56SW2K1102LEGY   56SW2K110/2 GY (LE) PDL
      PDL56SW2K120LEGY     56SW2K120 GREY (LE) PDL
      PDL56SW2K132LEGY     56SW2K132 GREY (LE) PDL
      PDL56SW2K320LEGY     56SW2K320 GREY (LE) PDL
      PDL56SW2K332LEGY     56SW2K332 GREY (LE) PDL
      PDL56SW2KC1102LEGY 56SW2KC110/2 GY COMM-KEY PDLM
      PDL56SW2KC132LEGY   56SW2KC132 GY COMM-KEY LE PDL
      PDL56SW2KC220LEGY   56SW2KC220 (LE) COMM-KEY PDLM
      PDL56SW2KC320LEGY   56SW2KC320 GY COMM-KEY LE PDL
      PDL56SW2KC332LEGY   56SW2KC332 GY COMM-KEY LE PDL




       

      What is the auxilary for the 56SW363, 56 Series, switch?

      The auxiliary for the 56SW363, 56 Series, switch is a 56SWAUX15.

      Can I still buy flaps to suit the old style 56 Series PDL 56SO432

      No old style flaps are not available

      Can I get a 56SO432 with a early break

      No you will need to select a product from the Vario range

      What is the DC22A rating for the PDL 56SW432KG

      25A @ 115V

      What is the AC3 rating of a PDL 56SW363/2

      The AC3 rating is 18.5kw, 35A

      The auxillary contacts in the 56SWH363A , are they N/O or N/C?

      The auxillary contacts in the 56SWH363A are - 1 N/O & 1 N/C

      For further information , visit link below:-
      https://www.clipsal.com/Trade/search-results?q=56SWH363A
      User-added image

      What is the kW rating of a 56SWH340?

      The 56SWH340 is rated at 11kW.

      Some of the key features are:
      • Heavy Duty Type
      • Motor Rated In 56E2 Deep Lid
      • 1.5 - 16 sq mm conductor terminal

      For further imformation please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=56SWH340
       

      Is the key removable in the on and off position for the 56SWK320?

      No, 56SW2K320 is the switch with a key removable on and off position

      Is 56SW363 available in Resistant White?

      56SW363 is available in a variety of colours . Available colour ranges are 
      CG - Chemical Grey
      GY - Grey
      RW - Resistant White
      RO - Resistant Orange
      RY - Resistant Yellow
      WW - Woolworths Grey

      Does Clipsal do a 56SO532 without the enclosure?

      Yes it is the 56SO532LE-GY.

      Is the 56SW420 available in Resistant Orange?

      Yes. It is available in Resistant Orange and the part number is 56SW420-RO.

      What is the part numbers for a 56 series 6 gang base with 2 x 3 pole 32amp C/B's and 2 x 4 pole 32amp socket outlets?

      The part numbers for a 56 series 6 gang base with 2 x 3 pole 32amp C/B's and 2 x 4 pole 32amp socket outlets are :- 56E6 , 56SO432 , 56CB4 & 4CB332/6

      for further information , visit links below:
      https://www.clipsal.com/Trade/search-results?q=56E6
      https://www.clipsal.com/Trade/search-results?q=56SO432
      https://www.clipsal.com/Trade/search-results?q=56CB4
      User-added image
      https://www.clipsal.com/Trade/search-results?q=4CB332/6
       

      What is the part number of the mounting enclosure/backbox to suit 56SWH425, 4 pole , 25A, 690VAC heavy duty surface switch?

      56E2 is the part number of the backbox to suit 56SWH425. Below are the dimensions of 56E2

      For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=56E2
      User-added image
       

      Is the cover for 56cv432 available as a spare part.

      No, not available as a spare part.

      Is there a 56 series outlet to suit a 56P432 that restricts the plug from being removed when switched on?

      Yes, use of the 56CVI432 series will restrict removal while the outlet is switched on as there is an interlocking pin to hold the plug in place.
       
      Some of the key features are:
      • 32 A thermal current
      • Internal interlock switch
      • 4 round pins
      • 500V
      • IP66
      • 3 Pole
      • Vertical
      For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=56CVI432 


       

      Do you have a IP66 switch that I can use to switch a 7.5kW motor?

      Yes, you would use a 56SWH325. It is available in both grey and resistant orange.

      Some of the key features are:
      • 1 gang
      • 204mm Height x 101 mm Width x 172mm Depth
      • Heavy Duty Type
      • Motor Rated In 56E2 Deep Lid
      • 7.5 kW
      For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=56SWH325

       

      Need a PDL 56 Series metal flexi conduit screwed adaptor for a 56PA432

      Not available will need to find out what thread the metal conduit is and find a imperial to metric adaptor

      What is part number for extension socket to suit 56AI432?

      The part number is 56CSC432 which is the extension socket to suit 56AI432.

      Is the 56SW320 available with a common key lock

      Yes it is use the letter C after 'SW' - 56SWKC320GY

      What is part no for internal socket ot suit 56SO532?

      Part no 56SO532G

      What is the temperature range of 56 series products?

      The material type limits the use of the standard 56 series product to -25 degree C to +75 degree C.

      What is the current output capability of the neutral pin of the 56SO532 outlet?

      The pins aren't tested separately, so the current carrying capability for the active and neutral pins is rated the same, which for this socket is 32A. 

      Is there a 56SO532 than can lock the plug in when on?

      Yes there is a 56SO532 than can lock the plug in when on. The part number is 56CV532.
      Some of the key features are:
      • 32 A thermal current
      • 5 round pins
      • 3 pole
      • M180 Rating
      • One Piece Cover
      • Lockable plug
      For further information please visit www.clipsal.com/Trade/Products/ProductDetail?catno=56CV532

      Is the 56SW320 DC rated?

      No unfortunately this product is not DC rated.
      Some of the key features are:
      • 1 gang Isolation switch
      • 107mm Height x 101mm Width x 108mm Depth
      • M150 motor rating
      • 8 mm hole diameter
      • 1.5 - 16 sq mm conductor terminal
      For further information please visit www.clipsal.com/Trade/Products/ProductDetail?catno=56SW320


       

      What is the part number for a 56 Series switch 3 pole, 20A, 56SW320 in chemical grey?

      The part number for the 56 Series switch 3 pole, 20A, 56SW320 in chemical grey is 56SW320-CG.

      Some of the key features are:
      • 1 gang Isolation switch
      • 107mm Height x 101mm Width x 108mm Depth
      • M150 motor rating
      • 8 mm hole diameter
      • 1.5 - 16 sq mm conductor terminal
      For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=56SW320


       

      What is the 20A flat pin version for a Matrix MCV310

      Matrix is no longer part of our offer in NZ  

      You would need to make it up from PDL56SO320F and PDL 56SW320 and a PDL 56E2 enclosure

      What is the part number for flush surround for mounting 56SW320?

      The part number for flush surround for mounting 56SW320 is - 56FA1 & 56FA1B

      For further information , visit link below:-
      https://www.clipsal.com/Trade/search-results?q=56FA1

      User-added image

      In the 56 series will 56P510, 5 pin, 500V, 10A plug fit into 56SO532, 5 pin, 500V, 32A socket?

      Unfortunately not, 56P510 cannot be plugged into 56SO532 as 56P510 is a size 1 plug. 56P532 is the recommended plug to use with 56SO532.
      For further information, please visit
      https://www.clipsal.com/Trade/Products/ProductDetail?catno=56P532