56ssr/3-gy sunset switch 3wire 10ax

Sunset Switch, 3-Wire, 240VAC, 10A, 56 Series

Catalogue Number: 56SSR/3
56ssr/3-gy sunset switch 3wire 10ax
RRP (Inc. GST)
Colour Grey (GY)
  • Grey 1 PCE


hide show
Range of product
Series 56
Clipsal - 56 Series
Product brand
Product or component type
sunset switch
Device presentation
basic element
Device application
  • enclosure: grey (RAL 7035)
  • cover: opal
    • Control type
      Device mounting
      Fixing mode
      by screws
      Cable entry
      1 rear entry of 20-25 mm diameter
    • PVC (polyvinyl chloride)
    • polycarbonate
      • Surface finish
        Installation direction
      • horizontal
      • vertical
        • Local signalling
          [Ue] rated operational voltage
          250 V AC 50 Hz
          Rated current
          10 AX
          Time delay range
          2…12 h
          Light intensity adjustment
          20-500 lux
          without marking
          101 mm
          101 mm
          70 mm
          Quantity per set
          set of 1
          Type of packing
          Ambient air temperature for operation
          45-45 °C
          IP degree of protection
        • AS/NZS 3133
        • AS/NZS 3100
        • IEC 60669-2-1
          • Package 1 Weight
            398 g
            Package 1 Height
            107 mm
            Package 1 width
            105 mm
            Package 1 Length
            110 mm
            EU RoHS Directive
            Under investigation

            Frequently Asked Questions

            hide show

            What is the part number for 56 series sunset switch?

            The part number for 56 series sunset switch is 56SSR/2 or 56SSR/3.

            Will the 56SSR/3 fit onto the 56PEDD3 base?

            Yes. The 56SSR/3 can be mounted onto existing bases.
            The product has been designed to be a direct replacement and keeps the 101mm by 101mm dimensions.

            Some of the key features of the new product are
            • 2-Wire
            • Dimension: 101.5 x 101.5 x 69.7 mm
            • Timer Setting Range 2H, 4H, 6H, 8H, 12H, Default Setting: DD (Dusk to Dawn)
            • Light Intensity Setting Range 20-500 lux, Default Setting Approximately: 20 lux
            • Operating Temperature 0-45°C

            User-added image


            Is part number 56SSW10 available with Neon?

            The part number 56SSW10 not available with neon supply with 56LEDK1.

            What is the AX rating for a 56SS10?

            Inductive current rating = 6A

            Where should the Load correction devices 31CAP and S31LCDA be used?

            The 31CAP is to be use with the following two wire products
            Infrascan 750WP, 751, 753.
            Timer 31VETR
            Sunset Switch WS226SSR/2, 56SSR/2, 31VSSR/2

            The S31LCDA is suitable for use with Clipsal & Schneider Electric 2-Wire, mains powered Dimmers that use
            Leading Edge, Trailing Edge and Universal Dimming.
            Other Suitable loads: Dimmable CFL/ Dimmable LED with Electronic control

            (Load correction Devices may not correct all problems)
            Installation Instructions can be found on the Clipsal.com Website.

            Is 56SW363 available in Resistant White?

            56SW363 is available in a variety of colours . Available colour ranges are 
            CG - Chemical Grey
            GY - Grey
            RW - Resistant White
            RO - Resistant Orange
            RY - Resistant Yellow
            WW - Woolworths Grey