56sb lock kit door

Series 56 Locking Kit Door To Suit 56Sb4 And 56Sb13, Ip66

Catalogue Number: 56SBLK
56sb lock kit door
Colour:
Colour: Per UOM Std.
  • 1 PCE

Specifications

hide show
Product brand
Clipsal
Range of product
Series 56
Product or component type
locking kit
EU RoHS Directive
Compliant

Frequently Asked Questions

hide show

Does the 56SPOK fit the 56SP0310?

No part number 56SHM is the part to use.

Are dimensions and images available of part number 56SB4 & 56SB13?

Yes, the information is available under the "Product Specifications" Tab for both part numbers.
For more information on these parts please refer to https://www.clipsal.com/Trade/Products/ProductDetail?catno=56SB4
https://www.clipsal.com/Trade/Products/ProductDetail?catno=56SB13  

 

What is part no for pendant outlet to suit 56C432

Part no 56SPOK

Do you sell the door only for the 56SB13 switchboard?

No unfortunately we only do the entire front section as a spare (less enclosure). The part number is 56SB13LE-GY.

For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=56SB13LE

Can you purchase the 56SB13 lid door clips as a spare part?

No, unfortunately we do not do the lid door clips as a spare part. However, you can purchase the front section as a spare (less enclosure). The part number is 56SB13LE.

What are the over all dimensions for the 56SB13?

The over all dimensions for the 56SB13 are 198mm (H) X 294mm (W) X 139mm (D).

What is alternative to part number 56SB13?

The alternative to part number is a 56CB13.
 

Can the 56SB13 be fitted to the 56E9 base?

The 56SB13LE can not be fitted to the standard 56E9 base. It can, however, be fitted to either the 56E8SB-GY or 56E9SB-GY.
These have had 2 pillars removed to allow placement of the din rail etc to allow fitment of the 56SB13LE to these bases.

Do you have a double suspended outlet?

No, we don't have a double suspended outlet.
However you could use two 56C310 and a 56SPOK suspension bracket.

For further information please visit https://www.clipsal.com/Trade


 

What is the difference between 56SB13 and 56CB13 enclosures?

56CB13 replaces 56SB13 and the key differences between the 56CB13 and 56SB13 series are as follows:
  • Cover and cover flap design are more rounded to resist dirt becoming trapped in its surrounds, especially on the top edge.
  • The latches on the 56SB13 required rotating the knobs 90 degrees to open or lock and were prone to breakage, where the 56CB13 latch in an identical manner to the 56SO cover flaps. This creates more consistency for the operator and the range so opening and closing of cover flaps is simplified. The new latch design also accepts 56SOLOCK locking accessories
  • The DIN Rail position and related assembly is now moulded for added safety and to decrease weight.

Features and Benefits of 56CB13:
  • 13 Module DIN Rail to suit RCDs, MCBs, RCBOs and accessories.
  • Deep cover providing ample wiring room
  • Impact resistant cover
  • Lockable cover for padlocking up to 7mm diameter hasp
  • Simplified dual latching system for front cover
  • Less enclosure version (56CB13LE-GY) available to replace damaged covers
For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?CatNo=56CB13

 

Why doesn't the 56SHL fit on my 56 series plug?

The 56SHL is for the size two plugs which is 32-50A three phase.
If this is too big you will need the 56SHM as this is for the size one plugs.

For further information please visit https://www.clipsal.com/Trade/search-results?q=56shm


 

Does the 56SB4 come in a LE version?

No, unfortunately the 56SB4 only comes as a complete unit.

Some of the key features are:
  • Supplied with neutral and earth bars
  • Earth terminal and door
  • No isolating switch
  • 4 modules wide to suit DIN Rail RCDs, MCBs, MCB/RCD and accessories
for further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=56SB4

Does the lid/door on the 56SB13 have UV stabilisation ?

Yes, it does.

All 56 series products in GY, RO and RW are UV stabilised, this includes the 56SB13.

The lens would filter the circuit breakers from UV, however to get full UVB stabilisation you would need to establish if the MCB material is also UV stabilised.

For more information on the 56 series range please visit the Clipsal.com website on the link provided https://www.clipsal.com/Trade/search-results?q=56sb13

 

What is the suspension hook for the 56 Series Mactro connectors

The suspension hook 56SHL fits the MACTRO 32 - 50A connectors, and the 56SHM fits the 16 - 20A connectors (and plugs)

What is the part number for a Din rail to suit 56 Series enclosure?

The din rail assembly by itself is a 56DINASS this clips into a 56E2 base.
If you require a complete enclosure, the part number would be a 56SB4-GY which comes in Grey.
You can also buy these as separate items to build up to this by using a 56CB4 + 56E2 and a 56DINASS.

Please see following brochure for complete 56 series and product data. 
https://updates.clipsal.com/ClipsalOnline/Files/Brochures/I0000116.pdf
 

What is the part number of the pendant conversion kit/suspension hook to suit 56CSC532 extension socket?

56SHL is the part number of the pendant conversion kit/suspension hook to suit 56CSC532 extension socket.

Key Features

  • Suits size 2 plugs and connectors
  • Replaces 56POK
For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=56SHL