switchboard 4m f/din n/bar e/c

Switchboard Enclosure, 56 Series, 4 Module, Surface Mount, Full DIN Rail

Catalogue Number: 56SB4
switchboard 4m f/din n/bar e/c
RRP (Inc. GST)
Colour Grey (GY)
  • Grey 1 PCE
  • Resistant Orange 1 PCE


hide show
Clipsal - 56 Series
Range of product
Series 56
Product brand
Product or component type
distribution board
Device application
Device mounting
Mounting mode
Number of modules
Cover type
  • transparent
  • hinged cover
    • Material
      polycarbonate: housing
      204 mm
      101 mm
      139 mm
      Net weight
      1.03 kg
      Mounting support
      DIN rail
      IP degree of protection
      AS 3100
      Ambient air temperature for operation
      -25-75 °C
      IP degree of protection
      IP66 conforming to AS 60529
      Unit Type of Package 1
      Number of Units in Package 1
      Package 1 Weight
      990 g
      Package 1 Height
      160 mm
      Package 1 width
      108 mm
      Package 1 Length
      206 mm
      EU RoHS Directive
      Under investigation

      Documents & downloads

      hide show
      Filter items
      • All

      • Product Brochures

      • CAD Files and Packs

      • Technical Data Catalogues

      • Installation Instruction

      • Specifications

      • Corporate Marketing

      Frequently Asked Questions

      hide show

      Are dimensions and images available of part number 56SB4 & 56SB13?

      Yes, the information is available under the "Product Specifications" Tab for both part numbers.
      For more information on these parts please refer to https://www.clipsal.com/Trade/Products/ProductDetail?catno=56SB4


      Does the 56SB4 come in a LE version?

      No, unfortunately the 56SB4 only comes as a complete unit.

      Some of the key features are:
      • Supplied with neutral and earth bars
      • Earth terminal and door
      • No isolating switch
      • 4 modules wide to suit DIN Rail RCDs, MCBs, MCB/RCD and accessories
      for further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=56SB4

      What is the part number for a Din rail to suit 56 Series enclosure?

      The din rail assembly by itself is a 56DINASS this clips into a 56E2 base.
      If you require a complete enclosure, the part number would be a 56SB4-GY which comes in Grey.
      You can also buy these as separate items to build up to this by using a 56CB4 + 56E2 and a 56DINASS.

      Please see following brochure for complete 56 series and product data. 

      Is there a single module 56 series that can have a 3 pole circuit breaker mounted in it?

      No, you need to use a 56CB4.

      Can I fit 2 x PDL 56CB4 side by side on a PDL 56E4 enclosure


      Is the 56CV532 available in white with RCD protection

      Need to use 56CV532 + 56E4 + 56CB4 + RCCB

      What do I need to put together a single phase 30A 56 Series RCD

      Use 56CB4 + A9R51240 40amp RCCB

      Using a 56 series 56CB4 in a 56E6 box. If I use a 56E4L will it maintain its IP rating

      Yes it will

      What is the part code for a 56 Series with a 32a 10ma RCBO

      Part codes you need a PDL 56CB4  with a 4RCBE232/10

      Do you do the din assembly for the 56CB4?

      Yes, the part number for the Din assembly to suit the 56 Series Circuit breaker cover 56CB4 is the 56DINASS.
      Some of the key features are:
      • 4 Module wide
      • 56 series
      For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=56DINASS


      What mounting enclosure do I use for a 56CB4?

      The mounting enclosure you would use with the 56CB4 is the 56E2.

      Some of the key features are:
      • 2 gang
      • 2 x 25 mm, 1 x 32 mm conduit entries
      For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=56E2

      Can I still buy a 56 Series ELCB

      56 Series is deleted 2007. 
      But you can use RCBO - PDL 56CB4 + PDL 56E3 + PDL 56SO310
      Show More