SOCKET O'LET SWT TIMER IP56
socket o'let swt timer ip56
SOCKET O'LET SWT TIMER IP56
socket o'let swt timer ip56

Switched Socket Outlet , 250V, 10A, 3 Flat Pin, IP66, Timer

Catalogue Number: 56CTC
SOCKET O'LET SWT TIMER IP56
socket o'let swt timer ip56
SOCKET O'LET SWT TIMER IP56
socket o'let swt timer ip56
Colour: Grey
Colour: Per UOM Std.
  • Grey 1 PCE
Added to cart

Specifications

hide show
Range of product
Series 56
Range
Clipsal - 56 Series
Product brand
Clipsal
Product or component type
socket-outlet
Device application
power supply
Number of poles
3
Plug, socket category
low voltage
Outlet standard
Australian/New Zealand
Plug, socket, control station shape
straight
Number of power socket outlets
1 protective cover
[In] rated current
10 A
[Ue] rated operational voltage
250 V AC 50 Hz
Poles description
1P + N + E
Protection type
without protection
Device mounting
surface
Number of plates
1
Material
polycarbonate: cover
Contacts material
pins: phosphor bronze
Connections - terminals
screw terminals cable(s) 2.5-6 mm²
Electrical connection
industrial connector
Depth
100 mm
Width
101 mm
Height
300 mm
Targeted country
Australia
Market segment
  • utility
  • small commercial
  • industry
    • Standards
    • AS/NZS 3133
    • AS/NZS 3123
      • Ambient air temperature for operation
        -25-75 °C
        IP degree of protection
        IP66 conforming to AS 60529
        EU RoHS Directive
        Will be compliant – Date to be confirmed

        Documents & downloads

        hide show
        Filter items
        • All

        • Product Brochures

        • CAD Files and Packs

        • Technical Data Catalogues

        • Specifications

        • Corporate Marketing

        Frequently Asked Questions

        hide show

        Is there a one piece timer auto/ manual switch with outlet?

        Yes, the part number is 56CTC.

        What is replacement part for timer in part number 56CTC?

        The replacement part for timer to suit is 56CTCLE.

        What is the part number for a 56 series analogue timer for the 56CTC?

        The part number for a 56 series analogue timer for the 56CTC is - 56TCLE

        For further information ,visit link below:-
        https://www.clipsal.com/Trade/search-results?q=56TCLE
        User-added image

        What is the difference between a PDL 56CSC and a PDL 56CR

        The PDL 56CSC fits 56AI and 56CR doesn't fit

        What is the part number for the double switch on the 56CTC combination timer?

        The part number for the double switch on the 56CTC combination timer is a 56SSW2AMLE.
        Some of the key features are:
        • 2 gang
        • Twin sliding
        • With Sliding switch dollies
        • Less enclosure
        • IP66
        • 10A
        • 250VAC
        • Labelled Auto/Man/On/Off
        For further information please visit www.clipsal.com/Trade/Products/ProductDetail?catno=56SSW2AMLE




         

        Can i get the 56TC less enclosure?

        Yes, the part number is 56TCLE.

        some of the key features are:
        • Time: 24 hour
        • Battery reserve
        • Less enclosure

        For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=56TCLE
         



         

        Is 56CSC310, extension socket available with round earth?

        Unfortunately not, 56CSC310 extension socket is not available with round earth pin. 
        For further information on 56CSC products, please visit https://updates.clipsal.com/ClipsalOnline/Files/Brochures/I0000112.pdf

        What is the part number for the replacement timer in a 56CTC?

        The part number of the replacement timer is 56TCLE.

        Some of the key features are:
        • Time: 24 hour
        • Battery reserve
        • Less enclosure
        • 294 Height x 101 Width x 63 Depth

        For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=56TCLE

         

        What is the function of the interlock on 56CVI one peice models of 56 series switched socket outlet?

        Mechanical interlock is an optional feature to ensure power disconnection before insertion or removal of the plug. Internal interlock facility is available on three phase, one piece cover  switched socket outlets.  add I to Catalogue Number e.g. 56CV410 becomes 56CVI410.

        Can I fit 2 x PDL 56CB4 side by side on a PDL 56E4 enclosure

        Yes

        Is the 56CV532 available in white with RCD protection

        Need to use 56CV532 + 56E4 + 56CB4 + RCCB

        What do I need to put together a single phase 30A 56 Series RCD

        Use 56CB4 + A9R51240 40amp RCCB

        Using a 56 series 56CB4 in a 56E6 box. If I use a 56E4L will it maintain its IP rating

        Yes it will

        What is the part code for a 56 Series with a 32a 10ma RCBO

        Part codes you need a PDL 56CB4  with a 4RCBE232/10

        What is the part number of the flush surround to suit 56CV, one piece cover, switched outlets?

        56FA2 is the part number of the flush surround to suit 56CV, one piece cover switched outlets. Surface mounted 56 Series Sockets, Switches and Combinations can be transformed into flush mounting equivalents using the 56FA Surrounds and Brackets. The surrounds can be used on various types of walls to ensure a neat installation, such as:
        • a mounting enclosure (back box) in poured concrete
        • a bracket on brick, brick veneer or panel walls.
        The brackets provide the installer with a  practical method of flush mounting 56 Series accessories. Comprehensive installation instructions are supplied with all units.
        56FA1, 56FA2, 56FA3 and 56FA4 Flush Surrounds contain a moulded flange, foam gasket and stainless steel mounting screws.
        For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=56FA2

        Can I still buy a 56 Series ELCB

        56 Series is deleted 2007. 
        But you can use RCBO - PDL 56CB4 + PDL 56E3 + PDL 56SO310

        Does the 56CB4 come with a "din rail kit"?

         Yes it does.
        1CB100 is the part number of the din rail kit in case a spare is required.

        Is there a single module 56 series that can have a 3 pole circuit breaker mounted in it?

        No, you need to use a 56CB4.

        Is the 56CB4N-GY padlockable.

        Yes this is padlockable using the flap and a padlock.
        This also comes in an non neon version as a 56CB4.

        Please see following link for more information.
        https://www.clipsal.com/Trade/Products/ProductDetail?catno=56CB4

        Do you have a 3 pole 100A isolator in the WHB or 56 Series?

        Only the WMS3100, however you could also use the SW3100 in the 56CB4 enclosure.

        What would be the back box for a 56CB4N-GY.

        The 56E2-GY is the part number for the back. This is also available in Grey resistant white, Wooloworths grey and chemical resistant grey and orange.
        Combined with a 56dinass which is a clip in din rail assembly to mount a circuit breaker or an Residual current device to complete the base.
        Please see brochure online for more information https://updates.clipsal.com/clipsalonline/Files/Brochures/I0000116.pdf

        Do you do the din assembly for the 56CB4?

        Yes, the part number for the Din assembly to suit the 56 Series Circuit breaker cover 56CB4 is the 56DINASS.
        Some of the key features are:
        • 4 Module wide
        • 56 series
        For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=56DINASS

         

        What mounting enclosure do I use for a 56CB4?

        The mounting enclosure you would use with the 56CB4 is the 56E2.

        Some of the key features are:
        • 2 gang
        • 2 x 25 mm, 1 x 32 mm conduit entries
        For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=56E2

        What is the replacement for 56RC4N, 4 din module, two gang cover assembly?

        56CB4N is the replacement for 56RC4N.

        Key Features

        • All 56CB4 include a padlocking facility on the cover flap
        • DIN rail accessory
        • Cover with mounting bracket and neon (Less Enclosure)
        • Suits 1, 2, 3 pole MCB module, 4 pole RCD
        • 240/415 V Neon voltage
        • 240/440 V
        For further information, please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=56CB4N

        What is the part number for a Din rail to suit 56 Series enclosure?

        The din rail assembly by itself is a 56DINASS this clips into a 56E2 base.
        If you require a complete enclosure, the part number would be a 56SB4-GY which comes in Grey.
        You can also buy these as separate items to build up to this by using a 56CB4 + 56E2 and a 56DINASS.

        Please see following brochure for complete 56 series and product data. 
        https://updates.clipsal.com/ClipsalOnline/Files/Brochures/I0000116.pdf
         

        What is the part number for a 56 series circuit breaker cover?

        The part number for the 56 series circuit breaker cover is 56CB4-GY.

        Some of the key features are:
        • All 56CB4 include a padlocking facility on the cover flap
        • DIN rail accessory
        • Cover with mounting bracket (Less Enclosure)
        • Suits 1, 2, 3 pole MCB module, 4 pole RCD
        • Less Neon
        • 240V/440V
        For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=56CB4.

        What is the replacement for the PDL MDE4?

        The replacement for the PDLMDE4WH is the 56CB4.
        Some of the key features are:
        • All 56CB4 include a padlocking facility on the cover flap
        • DIN rail accessory
        • Cover with mounting bracket (Less Enclosure)
        • Suits 1, 2, 3 pole MCB module, 4 pole RCD
        • Less Neon
        • 240V/440V
        For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=56CB4


        What is the part number for the cover to suit the RCD on the 56C310EL2P?

        The part number for the cover to suit the RCD on the 56CB4N.
        Some of the key features are:
        • All 56CB4 include a padlocking facility on the cover flap
        • DIN rail accessory
        • Cover with mounting bracket and neon (Less Enclosure)
        • Suits 1, 2, 3 pole MCB module, 4 pole RCD
        • 240/415 V Neon voltage
        • 240/440 V
        For further information please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=56CB4N

        What is the part numbers for a 56 series 6 gang base with 2 x 3 pole 32amp C/B's and 2 x 4 pole 32amp socket outlets?

        The part numbers for a 56 series 6 gang base with 2 x 3 pole 32amp C/B's and 2 x 4 pole 32amp socket outlets are :- 56E6 , 56SO432 , 56CB4 & 4CB332/6

        for further information , visit links below:
        https://www.clipsal.com/Trade/search-results?q=56E6
        https://www.clipsal.com/Trade/search-results?q=56SO432
        https://www.clipsal.com/Trade/search-results?q=56CB4
        User-added image
        https://www.clipsal.com/Trade/search-results?q=4CB332/6
         

        What is the replacement for 56EL4N, 56 series two gang cover assembly?

        56CB4N is the replacement for 56EL4N which will fit on existing 56E2 backbox.

        The 56 Series Two Gang Cover Assemblies are moulded in hi-impact polycarbonate and feature a specially designed mounting bracket which will accommodate the full range of Clipsal circuit breakers, RCDs and combination MCB/RCDs. Covers suit all 56 Series enclosures (minimum standard depth 63mm) and are supplied with neon indicators, which can be wired from either the line or load side of the switch.

        All 56CB4 include a padlocking facility on the cover flap.

        For further information on 56CB4N please visit https://www.clipsal.com/Trade/Products/ProductDetail?catno=56CB4N